Q4 2021 Core Molding Technologies Inc Earnings Call

Good morning, and welcome to the core molding technologies fourth quarter and full year 2021 earnings conference call. All participants will be in listen only mode should you need assistance. Please signal conference specialist by pressing the star key followed by zero. Please note. This event is being recorded I would now.

Operator: Good morning, and welcome to the Core Molding Technologies Q4 and Full Year 2021 Earnings Conference Call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. Please note this event is being recorded. I'd now like to turn the conference over to Sandy Martin, Investor Relations. Please go ahead.

Operator: Good morning, and welcome to the Core Molding Technologies Q4 and Full Year 2021 Earnings Conference Call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. Please note this event is being recorded. I'd now like to turn the conference over to Sandy Martin, Investor Relations. Please go ahead.

I'd like to turn the conference over to Sandy Martin Investor Relations. Please go ahead.

Thank you operator, and good morning, everyone. We appreciate you joining for the core molding technologies conference call to review fourth quarter and fiscal year results for 2021.

Sandy Martin: Thank you, operator, and good morning, everyone. We appreciate you joining for the Core Molding Technologies conference call to review Q4 and fiscal year results for 2021. Joining me on the call today are Core Molding's President and CEO, Dave Duvall, and the company's EVP and CFO, John Zimmer. This call is also being webcast and can be accessed through the audio link on the Events and Presentations page of the investor relations section at coremt.com. Information recorded on this call speaks only as of today, 8 March 2022. Please be advised that any time sensitive information may no longer be accurate as of the date of any replay or transcript reading.

Sandy Martin: Thank you, operator, and good morning, everyone. We appreciate you joining for the Core Molding Technologies conference call to review Q4 and fiscal year results for 2021. Joining me on the call today are Core Molding's President and CEO, Dave Duvall, and the company's EVP and CFO, John Zimmer. This call is also being webcast and can be accessed through the audio link on the Events and Presentations page of the investor relations section at coremt.com. Information recorded on this call speaks only as of today, 8 March 2022. Please be advised that any time sensitive information may no longer be accurate as of the date of any replay or transcript reading.

Joining me on the call today are core moldings, President and CEO , Dave Duvall, and the company's EVP and CFO John Zimmer.

This call is also being webcast and can be accessed through the audio link on the events and presentations page of the Investor Relations section at core M T Dot com info.

Information recorded on this call speaks only as of today March eight 2022. So please be advised that any time sensitive information may no longer be accurate as of the date of any replay or transcript reading.

I would also like to remind you that the statements made in today's discussion that are not historical fact, including statements of expectations or future events or future financial performance are forward looking statements made pursuant to the safe Harbor provisions of the private Securities Litigation Reform Act of 1995.

Sandy Martin: I would also like to remind you that the statements made in today's discussion that are not historical fact, including statements, or expectations, or future events, or future financial performance, or forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements, by their nature, are uncertain and outside of the company's control. Actual results may differ materially from those expressed or implied. Please refer to the earnings press release that was issued today for our disclosures on forward-looking statements. These factors and other risks and uncertainties are described in detail in the company's filings with the Securities and Exchange Commission. Management may also refer to non-GAAP measures, including adjusted EBITDA. Reconciliations to the nearest GAAP measures can be found at the end of our earnings release.

Sandy Martin: I would also like to remind you that the statements made in today's discussion that are not historical fact, including statements, or expectations, or future events, or future financial performance, or forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements, by their nature, are uncertain and outside of the company's control. Actual results may differ materially from those expressed or implied. Please refer to the earnings press release that was issued today for our disclosures on forward-looking statements. These factors and other risks and uncertainties are described in detail in the company's filings with the Securities and Exchange Commission. Management may also refer to non-GAAP measures, including adjusted EBITDA. Reconciliations to the nearest GAAP measures can be found at the end of our earnings release.

Forward looking statements by their nature are uncertain and outside of the company's control.

Actual results may differ materially from those expressed or implied please refer to the earnings press release that was issued today for our disclosures on forward looking statements. These factors and other risks and uncertainties are described in detail in the company's filings with the Securities and Exchange Commission.

Management May also refer to non-GAAP measures, including adjusted EBITDA reconciliations to the nearest GAAP measures can be found at the end of our earnings release core moldings technologies assumes no obligation to publicly update or revise any forward looking statements. Finally, the earnings press release, we issued.

Sandy Martin: Core Molding Technologies assumes no obligation to publicly update or revise any forward-looking statements. Finally, the earnings press release we issued earlier today is posted on the investor relations section of our website at coremt.com. A copy of the release has also been included in an 8-K submitted to the SEC. Now I would like to turn the call over to the company's CEO, Dave Duvall. Dave?

Sandy Martin: Core Molding Technologies assumes no obligation to publicly update or revise any forward-looking statements. Finally, the earnings press release we issued earlier today is posted on the investor relations section of our website at coremt.com. A copy of the release has also been included in an 8-K submitted to the SEC. Now I would like to turn the call over to the company's CEO, Dave Duvall. Dave?

Earlier today is posted on the Investor Relations section of our website at Corium T. Dot com a copy of the release has also been included in an 8-K submitted to the SEC and now I would like to turn the call over to the company's CEO , Dave Duvall Dave.

Thank you Sandy and good morning, everyone.

Dave Duvall: Thank you, Sandy, and good morning, everyone. I first want to thank our over 1,600 team members of Core Molding Technologies throughout Canada, Mexico, and the US for their hard work and dedication that made 2021 a successful year. I recognize and appreciate their commitment to excellence in a challenging environment over the last two years. We made significant progress in executing our strategy and deserve to be proud of what we have accomplished. I firmly believe that the organization's culture is a competitive advantage and is a foundational component of our business strategy. We strive to create a positive and rewarding work environment that is based on our foundational values of transparency for trust, mutual respect, courage to challenge, and being a learning organization.

Dave Duvall: Thank you, Sandy, and good morning, everyone. I first want to thank our over 1,600 team members of Core Molding Technologies throughout Canada, Mexico, and the US for their hard work and dedication that made 2021 a successful year. I recognize and appreciate their commitment to excellence in a challenging environment over the last two years. We made significant progress in executing our strategy and deserve to be proud of what we have accomplished. I firmly believe that the organization's culture is a competitive advantage and is a foundational component of our business strategy. We strive to create a positive and rewarding work environment that is based on our foundational values of transparency for trust, mutual respect, courage to challenge, and being a learning organization.

First I want to thank our over 1600 team members of core molding technologies throughout Canada, Mexico, and the U S for their hard work and dedication that made 2021 the successful year IRA.

I recognize and appreciate their commitment to excellence in a challenging environment over the last two years.

We've made significant progress in executing our strategy and deserve to be proud of what we have accomplished.

I firmly believe that the organization's culture as a competitive advantage and is a foundational component of our business strategy, we strive to create a positive and rewarding work environment that is based on our foundational values of transparency for trust mutual respect courage to challenge and being a learning organization.

So as part of our continued strategy to engage our existing shareholders and educate future shareholders. This marks an important step for us and that is this is our first earnings conference call for core.

Dave Duvall: As part of our continued strategy to engage our existing shareholders and educate future shareholders, this marks an important step for us in that this is our first earnings conference call for Core. I want to start by welcoming our existing investors. As a courtesy for those looking at CMT for the first time, we will provide a quick overview of our company. I will discuss our 2021 successes in the Q4 and for the fiscal year, and then turn the call over to John to review the Q4 and full year financial performance in more detail. I'll come back and wrap up the call with progress on our longer term strategic goals and outlook. We are not planning to take questions on this initial call. However, we look to do this on future calls.

Dave Duvall: As part of our continued strategy to engage our existing shareholders and educate future shareholders, this marks an important step for us in that this is our first earnings conference call for Core. I want to start by welcoming our existing investors. As a courtesy for those looking at CMT for the first time, we will provide a quick overview of our company. I will discuss our 2021 successes in the Q4 and for the fiscal year, and then turn the call over to John to review the Q4 and full year financial performance in more detail. I'll come back and wrap up the call with progress on our longer term strategic goals and outlook. We are not planning to take questions on this initial call. However, we look to do this on future calls.

I want to start by welcoming our existing investors and as a courtesy for those looking at CMT for the first time, we will provide a quick overview of our company.

And then I will discuss our 2021 successes in the fourth quarter and for the fiscal year, and then turn the call over to John to review, the Q4 and full year financial performance in more detail.

And then I'll come back and wrap up the call with progress on our longer term strategic goals and outlook and we are not planning to take questions. On this initial call. However, we'd look to do this on future calls.

We are headquartered in Columbus, Ohio, with Rolling sales throughout the United States, Canada, and Mexico, where our leading engineered materials company, providing manufactured solutions, serving a wide variety of markets, including power sports medium and heavy duty trucks building products industrial products utilities and automotive.

Dave Duvall: We are headquartered in Columbus, Ohio, with growing sales throughout the United States, Canada, and Mexico. We're a leading engineered materials company providing manufactured solutions, serving a wide variety of markets, including powersports, medium heavy-duty trucks, building products, industrial products, utilities, and automotive. One key area of change for our business model that I'm excited about is our technical solution sales team that works directly with our customer's engineering team to optimize a solution by converting traditional materials to engineered materials. This approach has proven successful and is enabled by Core's large portfolio of processes. I will talk more about that in a few minutes. Core Molding is a leading engineered materials and manufacturing solution company with large, diverse customers in expanding industries. We currently operate six strategically located manufacturing facilities, three in the US, two in Mexico, and one located in Canada.

Dave Duvall: We are headquartered in Columbus, Ohio, with growing sales throughout the United States, Canada, and Mexico. We're a leading engineered materials company providing manufactured solutions, serving a wide variety of markets, including powersports, medium heavy-duty trucks, building products, industrial products, utilities, and automotive. One key area of change for our business model that I'm excited about is our technical solution sales team that works directly with our customer's engineering team to optimize a solution by converting traditional materials to engineered materials. This approach has proven successful and is enabled by Core's large portfolio of processes. I will talk more about that in a few minutes. Core Molding is a leading engineered materials and manufacturing solution company with large, diverse customers in expanding industries. We currently operate six strategically located manufacturing facilities, three in the US, two in Mexico, and one located in Canada.

One key area of change for our business model and I'm excited about is our technical solution sales team.

That works directly with our customers engineering team to optimize the solution by converting traditional materials to engineered materials. This approach has proven successful and is enabled by course large portfolio of processes I will talk more about that in a few minutes.

Core molding is a leading engineered materials and manufacturing solution caught me with large diverse customers and expanding industries. We currently operate six strategically located manufacturing facilities three in the U S. Two in Mexico, and one located in Canada.

Dave Duvall: This broad geographic footprint allows us both the reach and capacity to operate closer to our end customers. Our market analysis identifies a large total addressable market of over $15 billion. We have a limited number of competitors, and given our 42 years in business, we believe that our experience, significant investment in equipment, as well as our large portfolio of processes, creates a distinct economic moat around our business. As I mentioned earlier, an exciting growth driver for Core is through our technical solution sales team and approach. By partnering with customers in the developmental phase and understanding their current challenges, we can develop optimized application solutions, utilize our large portfolio of engineered materials and advanced modeling techniques.

Dave Duvall: This broad geographic footprint allows us both the reach and capacity to operate closer to our end customers. Our market analysis identifies a large total addressable market of over $15 billion. We have a limited number of competitors, and given our 42 years in business, we believe that our experience, significant investment in equipment, as well as our large portfolio of processes, creates a distinct economic moat around our business. As I mentioned earlier, an exciting growth driver for Core is through our technical solution sales team and approach. By partnering with customers in the developmental phase and understanding their current challenges, we can develop optimized application solutions, utilize our large portfolio of engineered materials and advanced modeling techniques.

This broad geographic footprint and allows us both reach and capacity to operate closer to our end customers.

Our market analysis identifies a large total addressable market of over $15 billion, we have a limited number of competitors and given our 42 years in business, we believe that our experienced significant investment in equipment as well as our large portfolio of processes creates a distinct not economic.

Note around our business.

As I mentioned earlier, an exciting growth driver for of course through our technical solution sales team and approach by partnering with customers in the developmental phase and understanding of the current challenges. We can develop optimized application solutions utilize our large portfolio of engineered materials and advanced modeling techniques are.

Dave Duvall: Our goal is always to provide the customer with a unique and optimized solution utilizing the properties of our engineered materials to convert traditional materials and designs into an application solution that provides higher performance, light weighting, and part consolidation at a lower cost. Over the last several years, we have developed and/or acquired one of the largest portfolios of processes, a total of eight different and distinct processes, which enables a unique solutions approach for our customers. I believe this is a distinct competitive advantage in industries we strategically serve. Our company continues to foster long-term relationships with blue-chip companies like UFP Industries, serving the building products industry, Navistar, PACCAR, and Volvo, serving the heavy-duty truck industry. In addition, we built our reputation on excellence at BRP and Yamaha in the powersports market throughout North America.

Dave Duvall: Our goal is always to provide the customer with a unique and optimized solution utilizing the properties of our engineered materials to convert traditional materials and designs into an application solution that provides higher performance, light weighting, and part consolidation at a lower cost. Over the last several years, we have developed and/or acquired one of the largest portfolios of processes, a total of eight different and distinct processes, which enables a unique solutions approach for our customers. I believe this is a distinct competitive advantage in industries we strategically serve. Our company continues to foster long-term relationships with blue-chip companies like UFP Industries, serving the building products industry, Navistar, PACCAR, and Volvo, serving the heavy-duty truck industry. In addition, we built our reputation on excellence at BRP and Yamaha in the powersports market throughout North America.

We'll as always to provide the customer with a unique and optimized solution utilizing our properties of our engineered materials to convert traditional materials and designs into an application solution that provides higher performance light weighting and park consolidation at a lower cost.

Over the last several years we.

We have developed and work wired one of the largest portfolios of processes, a total of eight different and distinct processes, which enables a unique solutions approach.

For our customers.

I believe this is a distinct competitive advantage in the industries, we strategically serve.

Our company continues to foster long term relationships with Blue Blue chip companies like UFP industries, serving the building products industry.

Star Pac are involved low serving the heavy duty truck industry. In addition, we built our reputation on excellence, it ERP and Yamaha and the power sports market throughout North America.

Dave Duvall: These relationships have been integral to our business, and we will continue to work toward long-term collaborative relationships with these strategic partners, as well as the many other customers we serve. Revenue growth and diversification are key components of our long-term strategy, and in 2021, we successfully added $75 million of new wins, over 80% of which is recurring annual revenues. These new wins consist of 13 different programs, 2 of which were launched in 2021, and the remainder will be launched in 2022 and 2023. This new business further diversifies the company's revenues by expanding our business and markets, including industrial, utilities, and packaging, as well as powersports.

Dave Duvall: These relationships have been integral to our business, and we will continue to work toward long-term collaborative relationships with these strategic partners, as well as the many other customers we serve. Revenue growth and diversification are key components of our long-term strategy, and in 2021, we successfully added $75 million of new wins, over 80% of which is recurring annual revenues. These new wins consist of 13 different programs, 2 of which were launched in 2021, and the remainder will be launched in 2022 and 2023. This new business further diversifies the company's revenues by expanding our business and markets, including industrial, utilities, and packaging, as well as powersports.

These relationships have been integral to our business and we will continue to work toward long term collaborative relationships with these strategic partners as well as the many other customers we serve.

Revenue growth and diversification are key components of our long term strategy and in 2021, we successfully added $75 million of new wins.

Over 80% of which is reoccurring annual revenues. These new wins consists of 13 different programs two of which were launched in 2021 and the remainder will be launched in 2022 and 2023.

This new business further diversifies, the company's revenues by expanding our business in markets, including industrial utilities in packaging as well as power sports.

Dave Duvall: It's an exciting accomplishment to achieve $75 million in new wins, which represents over 26% of our full year product sales in 2021, and makes us even more excited about the company's prospects for 2022 and beyond. We see a continuation of diversification efforts as we grow the business and currently have a defined pipeline of over $160 million. Turning now to our financial results. Fiscal 2021 was a good year for the company. We reported record 2021 sales of $307 million, an increase of 38% from 2020. Also, net sales compared to 2019 pre-pandemic levels were up 8%. Demonstrating that despite the market disruptions experienced in the last two years, we continue to be able to expand our business.

Dave Duvall: It's an exciting accomplishment to achieve $75 million in new wins, which represents over 26% of our full year product sales in 2021, and makes us even more excited about the company's prospects for 2022 and beyond. We see a continuation of diversification efforts as we grow the business and currently have a defined pipeline of over $160 million. Turning now to our financial results. Fiscal 2021 was a good year for the company. We reported record 2021 sales of $307 million, an increase of 38% from 2020. Also, net sales compared to 2019 pre-pandemic levels were up 8%. Demonstrating that despite the market disruptions experienced in the last two years, we continue to be able to expand our business.

It's an exciting accomplishment to achieve $75 million and new wins, which represents over 26% of our full year product sales in 2021 makes us even more excited about the company's prospects for 2022 and beyond.

See a continuation of diversification efforts as we grow the business and currently have a defined pipeline of over $160 million.

Turning now to our financial results fiscal 2021 was a good year for the company. We reported record 2021 sales of $307 million, an increase of 38% from 2020.

Also net sales compared to 2019 pre pandemic levels were up 8% demonstrating that despite the market disruption experienced in the last two years, we continue to be able to expand our business.

Dave Duvall: Q4 sales were also strong, up 21% to $73 million compared to prior year. Our continued focus to offset the impact of raw material inflation resulted in us successfully shifting the company back to profitability in Q4. As you will recall, we reported significant and rapid raw material inflation in Q3 that continued into Q4 of 2021. Like most companies, we currently anticipate inflation to continue in 2022. However, we have added raw material surcharge arrangements to all but one of our long-term customers and are currently having productive discussions with that one customer as well. We believe that the combination of these surcharge arrangements as well as adjusting pricing for new programs should allow us to return closer to historical margin levels.

Dave Duvall: Q4 sales were also strong, up 21% to $73 million compared to prior year. Our continued focus to offset the impact of raw material inflation resulted in us successfully shifting the company back to profitability in Q4. As you will recall, we reported significant and rapid raw material inflation in Q3 that continued into Q4 of 2021. Like most companies, we currently anticipate inflation to continue in 2022. However, we have added raw material surcharge arrangements to all but one of our long-term customers and are currently having productive discussions with that one customer as well. We believe that the combination of these surcharge arrangements as well as adjusting pricing for new programs should allow us to return closer to historical margin levels.

Fourth quarter sales were also strong up 21% to $73 million compared to prior year.

Our continued focus to offset the impact of raw material inflation resulted in us successfully shifting the company back to profitability in the fourth quarter.

As you will recall, we reported significant and rapid raw material inflation in the third quarter that continued into the fourth quarter of 2021 and like most companies. We currently anticipate inflation to continue in 2022.

However.

We have added raw material surcharge arrangements to all but one of our long term customers and are currently having productive discussions with that one customer as well.

We believe that the combination of the surcharge arrangements as well as adjusting pricing for new programs should allow us to return closer to historical margin levels.

Dave Duvall: Although we don't know when the labor market and supply chain constraints will ease, we have adapted and are managing through the disruptions, I believe, as well or better than most. Now I'll hand it over to John Zimmer, our CFO, to discuss the financial results.

Dave Duvall: Although we don't know when the labor market and supply chain constraints will ease, we have adapted and are managing through the disruptions, I believe, as well or better than most. Now I'll hand it over to John Zimmer, our CFO, to discuss the financial results.

Although we don't know when the labor market and supply chain constraints will ease we have adapted and are managing through the disruptions I believe as well or better than most.

Now I'll hand, it over to John Zimmer, our CFO to discuss the financial results.

Thank you, Dave and good morning, everyone.

John Zimmer: Thank you, Dave, and good morning, everyone. Q4 2021 net sales totaled $73.2 million, up 21% versus the year ago. Product sales increased 16% versus the prior year period. The increased sales were largely driven by sales from new programs, sales from utility and power sports customers, as well as raw material recoveries. Gross profit for the Q4 of $8.5 million or 11.6% of sales was down from $10 million or 16.4% of sales in the prior year quarter. The decline in the Q4 margin was primarily due to the impact of raw material inflation. Excluding the impact of raw material inflation and related revenue recovery, Q4 2021 gross margin would have been 16.6%.

John Zimmer: Thank you, Dave, and good morning, everyone. Q4 2021 net sales totaled $73.2 million, up 21% versus the year ago. Product sales increased 16% versus the prior year period. The increased sales were largely driven by sales from new programs, sales from utility and power sports customers, as well as raw material recoveries. Gross profit for the Q4 of $8.5 million or 11.6% of sales was down from $10 million or 16.4% of sales in the prior year quarter. The decline in the Q4 margin was primarily due to the impact of raw material inflation. Excluding the impact of raw material inflation and related revenue recovery, Q4 2021 gross margin would have been 16.6%.

Fourth quarter of 2021, net sales totaled $73 $2 million up 21% versus a year ago and.

And product sales increased 16% versus the prior year period.

The increased sales were largely driven by sales from new programs sales from utility and power sports customers as well as raw material recoveries.

Gross profit for the fourth quarter of $8 $5 million or 11, 6% of sales was down from $10 million or 16, 4% of sales in the prior year quarter.

The decline in the fourth quarter margin was primarily due to the impact of raw material inflation.

Excluding the impact of raw material inflation and related revenue recovery fourth quarter of 2021 gross margin would've been 16, 6%.

That said, we responded quickly to an intense second half inflationary headwinds and returned the company to profitability in the fourth quarter, which gives us confidence as to the resilience of our hard working teams.

John Zimmer: That said, we responded quickly to an intense H2 inflationary headwinds and returned the company to profitability in Q4, which gives us confidence as to the resilience of our hardworking teams. In Q4, we improved our raw material inflation recoveries, but still have not been able to fully offset the impact. For Q4, we estimate unrecovered raw material inflation to be approximately $2.2 million, which is approximately $1.2 million less than the unrecovered raw material in Q3. As Dave mentioned, we are pleased to report that we successfully collaborated with several of our customers who we have not previously recouped raw material increases from to implement raw material surcharges starting in Q1 2022. These arrangements should provide for additional raw material recovery levels in 2022.

John Zimmer: That said, we responded quickly to an intense H2 inflationary headwinds and returned the company to profitability in Q4, which gives us confidence as to the resilience of our hardworking teams. In Q4, we improved our raw material inflation recoveries, but still have not been able to fully offset the impact. For Q4, we estimate unrecovered raw material inflation to be approximately $2.2 million, which is approximately $1.2 million less than the unrecovered raw material in Q3. As Dave mentioned, we are pleased to report that we successfully collaborated with several of our customers who we have not previously recouped raw material increases from to implement raw material surcharges starting in Q1 2022. These arrangements should provide for additional raw material recovery levels in 2022.

In the fourth quarter, we improved our raw material inflation recoveries, but still have not been able to fully offset the impact.

For the fourth quarter, we estimated unrecovered raw material inflation to be approximately $2 $2 million, which is approximately $1 $2 million less than the unrecovered raw material in the third quarter.

As Dave mentioned, we are pleased to report that we successfully collaborated with several of our customers.

Who we have not previously recouped raw material increases from to implement raw material surcharges, starting in the first quarter of 2022.

These arrangements should provide for additional raw material recovery levels in 2022.

Selling general and administrative expenses for the quarter were $6 $5 million, an improvement from $6 $9 million in the prior year period.

John Zimmer: Selling, general, and administrative expenses for the quarter were $6.5 million, an improvement from $6.9 million in the prior year period. In Q4, the company returned to operating income of $2 million, a sequential improvement from the Q3 operating loss of $2.4 million. As a reminder, Q3 operating loss included a charge of $2.3 million to transition profitable product work and ultimately close the Batavia, Ohio facility by 31 December 2021, which we successfully accomplished. As we explained last quarter, this facility consolidation simplifies our footprint, transitions profitable business to other locations, exits certain products that do not fit into our long-term strategy, and eliminates ongoing operating losses at this location.

John Zimmer: Selling, general, and administrative expenses for the quarter were $6.5 million, an improvement from $6.9 million in the prior year period. In Q4, the company returned to operating income of $2 million, a sequential improvement from the Q3 operating loss of $2.4 million. As a reminder, Q3 operating loss included a charge of $2.3 million to transition profitable product work and ultimately close the Batavia, Ohio facility by 31 December 2021, which we successfully accomplished. As we explained last quarter, this facility consolidation simplifies our footprint, transitions profitable business to other locations, exits certain products that do not fit into our long-term strategy, and eliminates ongoing operating losses at this location.

In the fourth quarter. The company returned to operating income of $2 billion.

A sequential improvement from the third quarter operating loss of $2 $4 million as a reminder, third quarter operating loss included a charge of $2 $3 million to transition profitable product worked and ultimately close the Batavia, Ohio facility by December 31, 2021, which we successfully accomplished.

As we explained last quarter this facility consolidations simplifies our footprint transitions profitable business to other locations.

Exit certain products that do not fit into our long term strategy and eliminates ongoing operating losses that dislocation.

This plant consolidation took a significant amount of coordination and work and we want to thank the entire Batavia plant team for their hard work.

John Zimmer: This plant consolidation took a significant amount of coordination and work, and we want to thank the entire Batavia plant team for their hard work. Fiscal 2021 Q4 net income aggregated $441,000 or $0.05 per share, compared to the 2020 Q4 net loss of $867,000 or $0.10 loss per share. Adjusted EBITDA for 2021 was $4.7 million compared to $5.9 million for the prior year. You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release. Full year 2021 net sales totaled $307 million, up 38% versus the same period prior year. Product sales increased 35% versus the prior year period.

John Zimmer: This plant consolidation took a significant amount of coordination and work, and we want to thank the entire Batavia plant team for their hard work. Fiscal 2021 Q4 net income aggregated $441,000 or $0.05 per share, compared to the 2020 Q4 net loss of $867,000 or $0.10 loss per share. Adjusted EBITDA for 2021 was $4.7 million compared to $5.9 million for the prior year. You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release. Full year 2021 net sales totaled $307 million, up 38% versus the same period prior year. Product sales increased 35% versus the prior year period.

Fiscal 2021 fourth quarter, net income aggregated $441000 or <unk> per share compared to the 2024th quarter net loss of $867000 or 10 cents loss per share.

Adjusted EBITDA for the 2021 was $4 $7 million compared to $5 $9 million for the prior year.

You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release.

Full year 2021, net sales totaled $307 million up 38% versus the same period prior year.

And product sales increased 35% versus the prior year period.

John Zimmer: This is the first time the company has surpassed annual sales of more than $300 million, which is due to the strong demand we are experiencing from both existing and new customers. Our revenue diversification strategy continues to pay off with product revenues for 2021 originating from several industries, including 40% truck, 21% power sports, 16% building products, and 10% industrial and utilities. Just over 5 years ago, the heavy-duty truck industry represented more than 80% of our product sales. Gross profit for the fiscal year was $41.3 million or 13.4%, compared to gross profit for 2020 of $34.5 million or 15.5%.

John Zimmer: This is the first time the company has surpassed annual sales of more than $300 million, which is due to the strong demand we are experiencing from both existing and new customers. Our revenue diversification strategy continues to pay off with product revenues for 2021 originating from several industries, including 40% truck, 21% power sports, 16% building products, and 10% industrial and utilities. Just over 5 years ago, the heavy-duty truck industry represented more than 80% of our product sales. Gross profit for the fiscal year was $41.3 million or 13.4%, compared to gross profit for 2020 of $34.5 million or 15.5%.

This is the first time the company has surpassed annual sales of more than $300 million, which is due to the strong demand we are experiencing from both existing and new customers.

Our revenue diversification strategy continues to pay off with product revenues for 2021 originating from several industries, including 40% truck, 21% power sports, 16% building products and 10% industrial and utilities.

Just over five years ago, the heavy duty truck industry represented more than 80% of our product sales.

Gross profit for the fiscal year was $41 $3 million or 13, 4% compared to gross profit for 2020 of $34 $5 million or 15, 5%.

Similar to the third and fourth quarters of 2021 full year gross profit margins were under pressure and a 210 basis point decline was mostly due to raw material cost inflation and a tight labor market.

John Zimmer: Similar to Q3 and Q4 of 2021, full year gross profit margins were under pressure, and a 210 basis point decline was mostly due to raw material cost inflation in a tight labor market. With this in focus, we successfully accelerated the renewal of an important labor agreement at our Columbus facility that was scheduled to renew in August 2022. This new labor contract will provide our customers with stability and assurance of uninterrupted supply. Selling, general, and administrative expenses for the year were $30.3 million, an increase of $6.2 million from the prior year, primarily due to the facility closing cost of $2.3 million, as well as increases in payroll expenses, and travel costs compared to full year 2020 expenses, which were impacted by COVID-19 cost reduction programs.

John Zimmer: Similar to Q3 and Q4 of 2021, full year gross profit margins were under pressure, and a 210 basis point decline was mostly due to raw material cost inflation in a tight labor market. With this in focus, we successfully accelerated the renewal of an important labor agreement at our Columbus facility that was scheduled to renew in August 2022. This new labor contract will provide our customers with stability and assurance of uninterrupted supply. Selling, general, and administrative expenses for the year were $30.3 million, an increase of $6.2 million from the prior year, primarily due to the facility closing cost of $2.3 million, as well as increases in payroll expenses, and travel costs compared to full year 2020 expenses, which were impacted by COVID-19 cost reduction programs.

With this focus we successfully accelerated the renewal of an important labor agreement at our Columbus facility that was scheduled to renew in August of 2022.

This new labor contract will provide our customers with stability and assurance of uninterrupted supply.

Selling general and administrative expenses for the year were $30 $3 million, an increase of $6 $2 million from the prior year, primarily due to the facility closing costs of $2 $3 million as well as increases in payroll expenses and travel costs compared to full year 2020 expenses, which were impacted by COVID-19 cost reduction.

Grams.

John Zimmer: 2021 selling general and administrative expenses, excluding the facility closure costs, were $28 million, which was in line with selling general and administrative costs in 2019 prior to COVID. For the fiscal year 2021, the company reported operating income of $11.1 million, an increase of 6.7% compared to operating income of $10.4 million in 2020. Excluding the facility closure costs, the company had operating income of $13.4 million, approximately 4.4% of sales. The company had a return on capital employed of 8.5%, which is consistent with 2020.

John Zimmer: 2021 selling general and administrative expenses, excluding the facility closure costs, were $28 million, which was in line with selling general and administrative costs in 2019 prior to COVID. For the fiscal year 2021, the company reported operating income of $11.1 million, an increase of 6.7% compared to operating income of $10.4 million in 2020. Excluding the facility closure costs, the company had operating income of $13.4 million, approximately 4.4% of sales. The company had a return on capital employed of 8.5%, which is consistent with 2020.

'twenty, one selling general and administrative expenses, excluding the facility closure costs were $28 million, which was in line with selling general and administrative cost in 2019 prior to Covid.

For fiscal year 2021, the company reported operating income of $11 $1 million, an increase of six 7% compared to operating income of $10 4 million in 2020.

Excluding the facility closure costs the company had operating income of $13 $4 million <unk>.

Approximately 4.4% of sales.

The company had a return on capital employed of eight 5%, which is consistent with 2020.

Fiscal 2021, net income aggregated $4 $7 million or <unk> 55 per share compared to net income of $8 2 million or <unk> 98 per share.

John Zimmer: Fiscal 2021 net income aggregated $4.7 million or $0.55 per share, compared to a net income of $8.2 million or $0.98 per share. Full year adjusted EBITDA for fiscal 2021 was $26.6 million compared to $22.6 million for the prior year. Although inflation compressed adjusted EBITDA margins in 2021, our longer term goal is to achieve adjusted EBITDA margins in the double-digit range in the future. You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release. Turning now to the company's financial position, cash flow, and balance sheet.

John Zimmer: Fiscal 2021 net income aggregated $4.7 million or $0.55 per share, compared to a net income of $8.2 million or $0.98 per share. Full year adjusted EBITDA for fiscal 2021 was $26.6 million compared to $22.6 million for the prior year. Although inflation compressed adjusted EBITDA margins in 2021, our longer term goal is to achieve adjusted EBITDA margins in the double-digit range in the future. You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release. Turning now to the company's financial position, cash flow, and balance sheet.

Full year adjusted EBITDA for the fiscal 2021 was $26 $6 million compared to $22 6 million for the prior year.

And although inflation compressed adjusted EBITDA margins in 2021, our longer term goal is to achieve adjusted EBITDA margins in the double digit range in the future.

You can find the GAAP to non-GAAP reconciliation of adjusted EBITDA financial measures at the end of today's press release.

Turning now to the company's financial position cash flow and balance sheet.

John Zimmer: The company's cash provided by operating activities totaled $12.5 million for the twelve months ended 31 December 2021, and capital expenditures for fiscal 2021 were $11.6 million. In 2021, we invested $5.3 million in capital, primarily in a new 5,500-ton direct long-fiber thermoplastic system in our Matamoros, Mexico facility. This is the largest press the company now owns and doubles the company's direct long-fiber thermoplastic capacity in Matamoros facility. We expect the system to be fully operational in Q2 2022. For fiscal year 2022, we expect capital expenditures to be in the range of $14 to 16 million, with plans to continue to invest in technologies and materials to grow our capabilities and industry breadth.

John Zimmer: The company's cash provided by operating activities totaled $12.5 million for the twelve months ended 31 December 2021, and capital expenditures for fiscal 2021 were $11.6 million. In 2021, we invested $5.3 million in capital, primarily in a new 5,500-ton direct long-fiber thermoplastic system in our Matamoros, Mexico facility. This is the largest press the company now owns and doubles the company's direct long-fiber thermoplastic capacity in Matamoros facility. We expect the system to be fully operational in Q2 2022. For fiscal year 2022, we expect capital expenditures to be in the range of $14 to 16 million, with plans to continue to invest in technologies and materials to grow our capabilities and industry breadth.

The company's cash provided by operating activities totaled $12 $5 million for the 12 months ended December 31, 2021, and capital expenditures for the fiscal 2021 were $11 $6 million.

In 2021, we invested $5 $3 million in capital primarily in a new 5500 ton direct long fiber thermoplastic system in our Matamoros, Mexico facility. This was the largest pressed the company now owns and doubles the company's direct long fiber thermoplastic capacity and mounted Morris facility.

We expect the system to be fully operational in the second quarter of 2022.

For fiscal year 2022, we expect capital expenditures to be in the range of $14 million to $16 million.

With plans to continue to invest in technologies and materials to grow our capabilities and industry breath.

At December 31, 2021, the company had total liquidity of $26 million, consisting of $6 million of cash and $20 million of availability under our revolving credit facility.

John Zimmer: At 31 December 2021, the company had total liquidity of $26 million, consisting of $6 million of cash and $20 million of availability under our revolving credit facility. The company had long-term debt of $25.2 million at year-end. As of the end of the quarter, our net debt to trailing twelve-month EBITDA ratio was less than 1x adjusted EBITDA. We believe our strong balance sheet and ample liquidity provides us flexibility and resiliency needed to manage through the next phase of supply chain constraints or inflation pressures, as well as to allocate a prudent amount of capital for growth. Given our successful completion of business transformation a few years back, we are focused on and believe in Core's strategic growth prospects in 2022 and beyond.

John Zimmer: At 31 December 2021, the company had total liquidity of $26 million, consisting of $6 million of cash and $20 million of availability under our revolving credit facility. The company had long-term debt of $25.2 million at year-end. As of the end of the quarter, our net debt to trailing twelve-month EBITDA ratio was less than 1x adjusted EBITDA. We believe our strong balance sheet and ample liquidity provides us flexibility and resiliency needed to manage through the next phase of supply chain constraints or inflation pressures, as well as to allocate a prudent amount of capital for growth. Given our successful completion of business transformation a few years back, we are focused on and believe in Core's strategic growth prospects in 2022 and beyond.

And the company you had long term debt of $25 $2 million at year end.

As of the end of the quarter, our net debt to trailing 12 months EBITDA ratio was less than one times adjusted EBITDA.

We believe our strong balance sheet and ample liquidity provides us flexibility and resiliency needed to manage through the next phase of supply chain constraints or inflation pressures as well as to allocate a prudent amount of capital for growth.

Given our successful completion of business transformation a few years back we were focused on and believe in core strategic growth prospects in 2022 and beyond.

John Zimmer: Stated another way, we are bullish on the company's opportunities and recognize that our business and processes are undervalued on a current multiple of trailing twelve months of adjusted EBITDA. Dave and I believe that engaging current investors and educating new investors, along with an intentional investor targeting strategy, will be the best path forward for growing long-term shareholder value. With that, I would like to turn the call back over to Dave.

John Zimmer: Stated another way, we are bullish on the company's opportunities and recognize that our business and processes are undervalued on a current multiple of trailing twelve months of adjusted EBITDA. Dave and I believe that engaging current investors and educating new investors, along with an intentional investor targeting strategy, will be the best path forward for growing long-term shareholder value. With that, I would like to turn the call back over to Dave.

There are another way we are bullish on the company's opportunities and recognize that our business and processes are undervalued on a current multiple of trailing 12 months of adjusted EBITDA.

Dave and I believe that engaging current investors and educating new investors along with an intentional investor targeting strategy will be the best path forward for growing long term shareholder value.

With that I would like to turn the call back over to Dave.

Thank you John .

Dave Duvall: Thank you, John. We remain absolutely focused on continuing to execute our long-term strategic plans, and we have positioned our company to continue our growth. Our technical solution sales are winning in new industries, and we continue to invest in our people, engineering capabilities, and assets as we drive to improve every single day. We will continue to invest in our ability to innovate and provide technical solutions and product conversions that result in lighter weight, lower cost, higher performance products for our customers. We will continue to concentrate on new industries, especially in the industrial and utility sectors, as more people work where they want to live, in both suburban and rural settings, where improved infrastructure is needed. Most importantly, we will continue to invest in our team members on our path to being a great place to work.

Dave Duvall: Thank you, John. We remain absolutely focused on continuing to execute our long-term strategic plans, and we have positioned our company to continue our growth. Our technical solution sales are winning in new industries, and we continue to invest in our people, engineering capabilities, and assets as we drive to improve every single day. We will continue to invest in our ability to innovate and provide technical solutions and product conversions that result in lighter weight, lower cost, higher performance products for our customers. We will continue to concentrate on new industries, especially in the industrial and utility sectors, as more people work where they want to live, in both suburban and rural settings, where improved infrastructure is needed. Most importantly, we will continue to invest in our team members on our path to being a great place to work.

So we remain absolutely focused on continuing to execute our long term strategic plans and we have positioned our company to continue our growth our technical solutions sales are winning in new industries, and we continue to invest in our people engineering capabilities and assets as we drive to improve every single day.

We'll continue to invest in our ability to innovate and provide technical solutions and product conversions that result in lighter weight lower cost higher performance products for our customers. We will continue to concentrate on new industries, especially in the industrial and utility sectors as more people work, where they want to live in both suburban and.

Rural settings, where improved infrastructure is needed most.

Most importantly, we will continue to invest in our team members on our path to being a great place to work.

As many businesses are also doing we are carefully considering the infrastructure bill and it related spending that is expected to accelerate in many areas.

Dave Duvall: As many businesses are also doing, we are carefully considering the infrastructure bill and the related spending that's expected to accelerate in many areas. We believe that decision makers of infrastructure investments will be evaluating products and processes, and our engineering material solutions are already supporting our customers in reducing the installation costs by converting traditional materials to a lighter weight, more durable composite solution. Our low cost, lightweight, and durable engineering materials with our technical solutions team are ready for rapid deployment into new infrastructure projects. Turning to our acquisition strategy, our goal over the past several years has been to diversify our processes and materials, which has been successful in further enabling our technical sales approach in creating unique multi-material solutions.

Dave Duvall: As many businesses are also doing, we are carefully considering the infrastructure bill and the related spending that's expected to accelerate in many areas. We believe that decision makers of infrastructure investments will be evaluating products and processes, and our engineering material solutions are already supporting our customers in reducing the installation costs by converting traditional materials to a lighter weight, more durable composite solution. Our low cost, lightweight, and durable engineering materials with our technical solutions team are ready for rapid deployment into new infrastructure projects. Turning to our acquisition strategy, our goal over the past several years has been to diversify our processes and materials, which has been successful in further enabling our technical sales approach in creating unique multi-material solutions.

We believe that decision makers of infrastructure investments will be evaluating products and processes and our engineering materials solutions are already supporting our customers and reducing the installation cost by converting traditional materials to a lighter weight more durable composite solution.

Our low cost lightweight and durable engineering materials with our technical solutions team are ready for rapid deployment into new infrastructure projects.

Turning to our acquisition strategy our goal over the past several years has been to diversify our processes and materials, which has been successful in further enabling our technical sales approach and creating unique multi material solutions.

Dave Duvall: Our large portfolio of engineered material processes has evolved and expanded to a total of eight distinctly different processes, which we are able to combine to create an optimized solution for our customers, essentially composites of composites. A significant advantage to this strategy is it allows Core to provide solutions in industries that have not traditionally taken advantage of multiple materials in one solution. An example of our material diversification involves our expansion into thermoplastic products, which offer sustainability advantages over thermoset materials because they're recyclable. We want to be good environmental stewards and strive to offer our customers more environmentally friendly products. In fact, we have partnered with the Ohio Soybean Council and Airable Research Lab to develop bio-based thermoset resins for the thermoset industry. Seven years ago, Core offered thermoset solutions only, and today approximately 50% of our business operates using thermoplastic solutions.

Dave Duvall: Our large portfolio of engineered material processes has evolved and expanded to a total of eight distinctly different processes, which we are able to combine to create an optimized solution for our customers, essentially composites of composites. A significant advantage to this strategy is it allows Core to provide solutions in industries that have not traditionally taken advantage of multiple materials in one solution. An example of our material diversification involves our expansion into thermoplastic products, which offer sustainability advantages over thermoset materials because they're recyclable. We want to be good environmental stewards and strive to offer our customers more environmentally friendly products. In fact, we have partnered with the Ohio Soybean Council and Airable Research Lab to develop bio-based thermoset resins for the thermoset industry. Seven years ago, Core offered thermoset solutions only, and today approximately 50% of our business operates using thermoplastic solutions.

Our large portfolio of engineered material processes has evolved and expanded to a total of eight distinctly different processes, which we are able to combine to create an optimized solution for our customers.

Essentially composites of composites.

A significant advantage to this strategy as it allows <unk> to provide solutions in industries that have not traditionally taken advantage of multiple materials in one solution.

An example of a material diversification involves our expansion into thermoplastic products.

<unk> offer sustainable sustainability advantages over thermal set materials because their recyclable.

We want to be good environmental stewards and strive to offer our customers more environmentally friendly products. In fact, we have partnered with the Ohio Soy Council in arable research lab to develop Biobased thermal set resins for the thermostat industry.

Seven years ago, who were offered thermostat solutions on and today approximately 50% of our business operates using thermoplastics solutions. In addition to product expansion. We have also expanded our geographic footprint with over 30% of our sales coming from Canada.

Dave Duvall: In addition to product expansion, we have also expanded our geographic footprint with over 30% of our sales coming from Canada. Our significant growth has occurred over a relatively short time frame because we've made strategic acquisitions that have added to our processes, materials, and footprint. This growth has been intentional and strategic, as can be seen by our $75 million in new business wins. We will also continue to evaluate our business portfolio to identify low profit products and evaluate improvements or exit strategies for those products. We believe the continued execution of our long-term strategic goals will position the company for further stability and profitable growth in the future. We see a bright future ahead for Core Molding Technologies, and we are excited to continue growing the company, continue growing our good corporate citizenship, and delivering value for our shareholders and all stakeholders.

Dave Duvall: In addition to product expansion, we have also expanded our geographic footprint with over 30% of our sales coming from Canada. Our significant growth has occurred over a relatively short time frame because we've made strategic acquisitions that have added to our processes, materials, and footprint. This growth has been intentional and strategic, as can be seen by our $75 million in new business wins. We will also continue to evaluate our business portfolio to identify low profit products and evaluate improvements or exit strategies for those products. We believe the continued execution of our long-term strategic goals will position the company for further stability and profitable growth in the future. We see a bright future ahead for Core Molding Technologies, and we are excited to continue growing the company, continue growing our good corporate citizenship, and delivering value for our shareholders and all stakeholders.

Our significant growth has occurred over a relatively short timeframe, because we made strategic acquisitions that have added to our processes materials and footprint.

This growth has been intentional and strategic <unk>.

As can be seen by our $75 million in new business wins.

We will also continue to evaluate our business portfolio to identify low profit products and evaluate improvements or exit strategy for those problems.

We believe the continued execution of our long term strategic goals will position the company for further stability and profitable growth in the future.

We see a bright future ahead for core molding technologies and we are excited to continue growing the company.

Growing our good corporate citizenship and delivering value for our shareholders and all stakeholders.

Dave Duvall: Thank you for your interest in our company. If you have questions, please contact us directly or follow-up meetings. Our contact information is on the release or website. Have a good day, and we look forward to providing an update of our progress when we report Q1 results. Thank you very much.

Dave Duvall: Thank you for your interest in our company. If you have questions, please contact us directly or follow-up meetings. Our contact information is on the release or website. Have a good day, and we look forward to providing an update of our progress when we report Q1 results. Thank you very much.

For your interest in our company. If you have questions. Please contact us directly or follow up meetings. Our contact information is on the release or website have a good day and we look forward to providing an update of our progress when we report first quarter results. Thank you very much.

The conference has now concluded. Thank you for attending today's presentation you may now disconnect.

Operator: The conference has now concluded. Thank you for attending today's presentation. You may now disconnect.

Operator: The conference has now concluded. Thank you for attending today's presentation. You may now disconnect.

Q4 2021 Core Molding Technologies Inc Earnings Call

Demo

Core Molding Technologies

Earnings

Q4 2021 Core Molding Technologies Inc Earnings Call

CMT

Tuesday, March 8th, 2022 at 3:00 PM

Transcript

No Transcript Available

No transcript data is available for this event yet. Transcripts typically become available shortly after an earnings call ends.

Want AI-powered analysis? Try AllMind AI →