Q2 2026 Steel Dynamics Inc Earnings Call

July 21, 2026

Speaker #1: Good day, and welcome to the STEEL DYNAMICS second quarter 2026 earnings conference call. At this time, all participants are on a listen-only mode. After management's remarks, we will conduct a question-and-answer session and instructions will follow at that time.

Operator: Good day. Welcome to the Steel Dynamics Second Quarter 2026 Earnings Conference Call. At this time, all participants are on a listen-only mode. After management's remarks, we will conduct a question-and-answer session, and instructions will follow at that time. Please be advised this call is being recorded today, 21 July 2026, and your participation implies consent to our recording of this call. If you do not agree to these terms, please disconnect. At this time, I'd like to turn the conference over to David Lipschitz, Director, Investor Relations. Please go ahead.

Speaker #1: this call is being recorded today July 21, 2026, and your participation implies consent to our recording of this call. If you do not agree to these terms, please disconnect.

Speaker #1: At this time, I'd like to turn the conference over to David Lipschitz, Director and Vestor Relations. Please go ahead.

Speaker #2: Thank you, Matthew. Good morning, and welcome to Steel Dynamics' second quarter 2026 earnings conference call. As a reminder, today's call is being recorded and will be available on our website for replay later today.

David Lipschitz: Thank you, Matthew. Good morning. Welcome to Steel Dynamics' Q2 2026 Earnings Conference Call. As a reminder, today's call is being recorded and will be available on our website for replay later today. Leading today's call are Mark Millett, Chairman and Chief Executive Officer of Steel Dynamics, Theresa Wagler, Executive Vice President and Chief Financial Officer, and Barry Schneider, President and Chief Operating Officer. The other members of our senior leadership team are joining us on the call individually. Some of today's statements, which speak only as of this date, may be forward-looking and predictive, typically preceded by believe, expect, anticipate, or words of similar meaning. They are intended to be protected by the Private Securities Litigation Reform Act of 1995, should actual results turn out differently.

Speaker #2: Leading today's call are Mark Millett, Chairman and Chief Executive Officer of Steel Dynamics; Theresa Wagler, Executive Vice President and Chief Financial Officer; and Barry Schneider, President and Chief Operating Officer.

Speaker #2: The other members of our senior leadership team are joining us on the call individually. Some of today's statements, which speak only as of this date, may be forward-looking and predictive.

Speaker #2: Typically preceded by 'believe,' 'expect,' 'anticipate,' or words of similar meaning, they are intended to be protected by the Private Securities Litigation Reform Act of 1995, should actual results turn out differently.

Speaker #2: Such statements involve risks and uncertainties related to integrating or starting up new assets, the aluminum industry, the use of estimates and assumptions in connection with anticipated project returns, and our steel, metals recycling, fabrication, and aluminum businesses.

David Lipschitz: Such statements involve risks and uncertainties related to integrating or starting up new assets, the aluminum industry, the use of estimates and assumptions in connection with anticipated project returns, and our steel, metals recycling, fabrication, and aluminum businesses, as well as to general business and economic conditions. Examples of these are described in the related press release as well as in our annually filed SEC Form 10-K under the headings Forward-Looking Statement and Risk Factors, found on the Internet at www.sec.gov and, if applicable, in any later SEC Form 10-Q. You will also find any referenced non-GAAP financial measures reconciled to the most directly comparable GAAP measures in the press release issued yesterday entitled Steel Dynamics Reports Q2 2026 Results. Now I'm pleased to turn the call over to Mark.

Speaker #2: As well as to general business and economic conditions. Examples of these are described in the related press release, as well as in our annually filed SEC Form 10-K under the headings Forward Looking Statement and Risk Factors, found on the internet at www.sec.gov.

Speaker #2: And, if applicable, in any later SEC Form 10-Q. You will also find any referenced non-GAAP financial measures reconciled to the most directly comparable GAAP measures in the press release issued yesterday, entitled "STEEL DYNAMICS Reports Second Quarter 2026 Results."

Speaker #2: And now I'm pleased to turn the call over to Mark.

Speaker #3: Super. Thank you, David. And good morning, everyone. Thanks for joining us this morning for our second quarter 2026 earnings call. As reported, our teams achieved a strong second quarter financial and operational performance.

Mark Millett: Super. Thank you, David. Good morning, everyone. Thanks for joining us this morning for our Q2 2026 earnings call. As reported, our teams achieved a strong Q2 financial and operational performance. The quarter highlights included record quarterly steel shipments of 3.7 million tons, adjusted EBITDA of $921 million, and we achieved meaningful milestones across our aluminum and Sinton platforms. It's exciting to watch our long-term vision translate into operational success, customer partnerships, and growing value creation. We have an amazing team of people that achieve best-in-class performances each and every day, and I'm just simply honored to be one of them. Sadly, one of our new team members, Elijah Jones from New Process Steel, was fatally injured in an accident that occurred while work was being performed on equipment this past April.

Speaker #3: The quarter highlights included record quarterly steel shipments of 3.7 million tons, adjusted EBITDA of 921 million, and we achieved meaningful milestones across our aluminum and cement platforms.

Speaker #3: It's exciting to watch our long-term vision translate into operational success, customer partnerships, and growing value creation. We have an amazing team of people that achieve best-in-class performances each and every day.

Speaker #3: And I'm just simply honored to be one of them. But sadly, one of our new team members Elijah Jones from New Process Steel was fatally injured in an accident that occurred while work was being performed on equipment this past April.

Speaker #3: It is gut-wrenching for everyone to experience such an event, and our prayers and thoughts continue to be with Elijah's family, friends, and teammates. We often say safety is our most important cultural pillar and value.

Mark Millett: It's gut-wrenching for everyone to experience such an event, and our prayers and thoughts continue to be with Elijah's family, friends, and teammates. We often say safety is our most important cultural pillar and value. Our world-class safety culture continues to evolve, and our team's unwavering dedication to our take-control-of-safety philosophy must continue to strengthen even further. I'm continually inspired by the commitment of our team members demonstrating towards one another. They operate as a family, supporting each other while challenging the status quo and striving for continuous improvement every day. We are resolute and committed to achieving a zero-incident environment and will not be satisfied until that becomes a reality. Before I continue, I'd like Theresa and Barry to both add color to the quarter's results. Theresa?

Speaker #3: Our world-class safety culture continues to evolve, and our team's unwavering dedication to our Take Control of Safety philosophy must continue to strengthen even further.

Speaker #3: I'm continually inspired by the commitment of our team members demonstrating towards one another. They operate as a family, supporting each other while challenging the status quo and striving for continuous improvement every day.

Speaker #3: We are resolute and committed to achieving a zero-incident environment, and we will not be satisfied until that becomes a reality. But before I continue, I'd like Theresa and Barry to both add color to the quarter's results.

Speaker #3: So, Theresa?

Speaker #4: Thank you, Mark. Good morning, everyone. Thank you for joining us this morning. For the second quarter of 2026, our net income was $534 million, or $3.69 per diluted share, with adjusted EBITDA of $921 million.

Theresa Wagler: Thank you, Mark. Good morning, everyone. Thank you for joining us this morning. For Q2 2026, our net income was $534 million, or $3.69 per diluted share, with adjusted EBITDA of $921 million. Q2 2026 revenues were $6.1 billion and operating income was $700 million, higher than sequential Q1 results, driven by higher realized steel pricing and record steel shipments. Our steel operations generated operating income of $721 million in Q2, a 30% sequential increase as average selling prices per ton increased $105. Value-added spreads to hot band have also improved $70 per ton from the lows experienced in Q4 2025. As the largest flat-rolled steel coater in North America, this will be especially beneficial moving forward.

Speaker #4: Second quarter 2026 revenues were $6.1 billion and operating income was $700 million. Higher than sequential first quarter results, driven by higher realized steel pricing and record steel shipments.

Speaker #4: Our steel operations generated operating income of $721 million in the second quarter, a 30% sequential increase as average selling prices per ton increased $105.

Speaker #4: Value-added spreads to hot band have also improved $70 per ton from the lows experienced in the fourth quarter of 2025. As the largest flat-rolled steel coater in North America, this will be especially beneficial moving forward.

Speaker #4: As a reminder, approximately 80% or more of our flat-rolled steel business is linked to lagging price contracts, and aggregate generally lagging two months. So the more recent flat-rolled steel price increases and further improved value-added product spreads will positively impact our third quarter results.

Theresa Wagler: As a reminder, approximately 80% or more of our flat-rolled steel business is linked to lagging price contracts, in aggregate, generally lagging two months. The more recent flat-rolled steel price increases and further improved value-added product spreads will positively impact our Q3 results. Additionally, demand and related pricing for our long product steel group is especially strong, with demand and pricing continuing an upward trend. Q2 2026 operating income from our metals recycling platform was $48 million, in line with sequential earnings as increased shipments offset lower steel metal spread. Scrap flows also remain seasonally strong with ample supply. Our steel fabrication team achieved Q2 operating income of $85 million, aligned with Q1 results of $90 million as increased volume and steady pricing were offset by higher steel raw material input costs.

Speaker #4: Additionally, demand and related pricing for our long product steel group is especially strong, with demand and pricing continuing an upward trend. Second quarter 2026 operating income from our metals recycling platform was $48 million in line with sequential earnings as increased shipments offset lower steel metal spread.

Speaker #4: Scrap flows also remain seasonally strong with ample supply. Our steel fabrication team achieved second quarter operating income of $85 million, aligned with first quarter results of $90 million, as increased volume and steady pricing were offset by higher steel raw material input costs.

Speaker #4: Our fabrication business generally maintains between 10 to 12 weeks of steel inventory, which can tighten margins in a rising steel price environment. Our steel joists and deck business is experiencing strong demand and order activity. As a result, our order backlog is 45% higher now compared to this time last year.

Theresa Wagler: Our fabrication business generally maintains between 10 to 12 weeks of steel inventory, which can tighten margins in a rising steel price environment. Our steel joist and deck business is experiencing strong demand and order activity. As a result, our order backlog is 45% higher now when compared to this time last year. We are also seeing increasingly constructive price discussions. This trend reflects improving market fundamentals and healthy demand conditions. The aluminum team's execution is amazing. Mark will provide the details later on the call. As for the financial impact, Q2 2026 operating losses associated with the continued startup and commissioning of our aluminum operations were $33 million, a 48% improvement over sequential results. There was also an additional non-cash impairment charge of $16 million related to the relocation of our second planned recycled slab center.

Speaker #4: We are also seeing increasingly constructive price discussions. This trend reflects improving market fundamentals and healthy demand conditions. The aluminum team's execution is amazing. Mark will provide the details later on the call.

Speaker #4: As for the financial impact, second quarter 2026 operating losses associated with the continued startup and commissioning of our aluminum operations were $33 million, a 48% improvement over sequential results.

Speaker #4: There was also an additional non-cash impairment charge of $16 million related to the relocation of our second planned recycled slab center. Aluminum flat-rolled sheet shipments increased to $53,000 metric tons in the quarter from $22,500 metric tons, achieved in the first quarter of this year.

Theresa Wagler: Aluminum flat-rolled sheet shipments increased to 53,000 metric tons in the quarter from 22,500 metric tons achieved in Q1 of this year. We expect volumes and profitability from the aluminum rolling mill to increase sharply in H2 2026 and into 2027 as the third cold mill is brought online in Q3, as startup costs subside, utilization and yields improve, and scrap content increases. In Q2, we generated cash flow from operations of $428 million. Cash was reduced by $225 million due to working capital growth that was primarily associated with increased customer account values as product pricing improved throughout our businesses and aluminum flat-rolled sheet sales continued to climb. Our cash generation is supported by our differentiated circular business model and highly variable low-cost structure.

Speaker #4: We expect volumes and profitability from the aluminum rolling mill to increase sharply in the second half of 2026 and into 2027 as the third coal mill is brought online in the third quarter. As startup costs subside, utilization and yields improve, and scrap content increases.

Speaker #4: In the second quarter, we generated cash flow from operations of $428 million. Cash was reduced by $225 million due to working capital growth that was primarily associated with increased customer account values as product pricing improved throughout our businesses, and aluminum flat-rolled sheet sales continued to climb.

Speaker #4: Our cash generation is supported by our differentiated circular business model and highly variable low-cost structure. At the end of the quarter, we had liquidity of $2 billion comprised of cash and investments of $800 million and our fully available unsecured revolver of $1.2 billion.

Theresa Wagler: At the end of the quarter, we had liquidity of $2 billion, comprised of cash and investments of $800 million and our fully available unsecured revolver of $1.2 billion. During Q2, we invested $124 million in capital investments and invested $262 million year to date. We believe H2 2026 capital investments will be in the range of between $300 and 350 million. In H1 2026, we increased our cash dividend and we repurchased $350 million of our common stock, with $489 million remaining authorized for share repurchases at the end of June. These actions reflect the strength of our capital foundation and cash flow generation capability and the continued confidence we have in our future. Our capital allocation strategy prioritizes high-return growth opportunities while maintaining a disciplined and balanced approach to shareholder value creation.

Speaker #4: During the second quarter, we invested $124 million in capital investments and invested $262 million year-to-date. We believe the second half of 2026 capital investments will be in the range of between $300 and $350 million.

Speaker #4: In the first half of 2026, we increased our cash dividend, and we repurchased $350 million of our common stock, with $489 million remaining authorized for share repurchases at the end of June.

Speaker #4: These actions reflect the strength of our capital foundation and cash flow generation capability, and the continued confidence we have in our future. Our capital allocation strategy prioritizes high-return growth opportunities while maintaining a disciplined and balanced approach to shareholder value creation.

Speaker #4: Shareholder returns are anchored by a sustainable and growing base dividend, complemented by a flexible share repurchase program that allows us to return additional capital to shareholders when appropriate.

Theresa Wagler: Shareholder returns are anchored by a sustainable and growing base dividend, complemented by a flexible share repurchase program that allows us to return additional capital to shareholders when appropriate. At the same time, we remain committed to preserving our investment-grade credit profile, ensuring the financial strength and flexibility needed to support strategic growth initiatives, navigate market cycles, and create long-term value for our shareholders. Our free cash flow profile has fundamentally changed over the last five years, from an annual average of $540 million between 2011 and 2015 to $2.4 billion for the most recent five-year period. There's more to come. Over the past several years, we have invested more than $5 billion in three transformative organic growth initiatives. Our Sinton steel mill, value-added coated lines, and aluminum flat roll products platform.

Speaker #4: At the same time, we remain committed to preserving our investment grade, credit profile, insuring the financial strength and flexibility needed to support strategic growth initiatives navigate market cycles, and create long-term value for our shareholders.

Speaker #4: Our free cash flow profile has fundamentally changed over the last five years, from an annual average of $540 million between 2011 and 2015 to $2.4 billion for the most recent five-year period.

Speaker #4: And there is more to come. Over the past several years, we have invested more than $5 billion in three transformative organic growth initiatives: our Sinton steel mill, value-added coated lines, and aluminum flat-rolled products platform.

Speaker #4: These investments reflect our disciplined approach to capital allocation and our commitment to growing in markets where we believe we can create sustainable competitive advantages.

Theresa Wagler: These investments reflect our disciplined approach to capital allocation and our commitment to growing in markets where we believe we can create sustainable competitive advantages. As these assets continue to ramp and mature, we expect them to generate meaningful earnings and related cash flow. Collectively, these projects are estimated to provide over $1.4 billion of through-cycle annual EBITDA capability, representing a significant opportunity to enhance our future growth, profitability, and shareholder return. We've established a strong and sustainable capital foundation that enables us to invest in meaningful strategic growth opportunities, consistently return capital to shareholders, and maintain the investment-grade financial metrics that underpin our long-term success. Barry?

Speaker #4: As these assets continue to ramp and mature, we expect them to generate meaningful earnings and related cash flow. Collectively, these projects are estimated to provide over $1.4 billion of through-cycle annual EBITDA capability, representing a significant opportunity to enhance our future growth, profitability, and shareholder return.

Speaker #4: We've established a strong and sustainable capital foundation that enables us to invest in meaningful, strategic growth opportunities, consistently return capital to shareholders, and maintain the investment-grade financial metrics that underpin our long-term success.

Speaker #4: Barry?

Speaker #1: Thank you, Theresa. Our steel fabrication operations performed well. Delivering solid earnings. As increased demand and steady realized pricing helped offset higher steel input costs.

Barry Schneider: Thank you, Theresa. Our steel fabrication operations performed well, delivering solid earnings. Increased demand and steady realized pricing helped offset higher steel input costs. Order activity has been stronger than we have seen in a number of years. The increased demand has been led by several large markets, reducing the risk that any single sector derails the overall positive trajectory. The Dodge Momentum Index, which generally leads construction spending by a 12 to 18 month window, increased to its highest recent level, up more than 30% year over year. The increase was driven by commercial planning and accelerating institutional activity led by healthcare. The long-range project pipeline appears robust. Supporting that idea, contractor project backlogs also stood at over nine months in May, which is near the highest level in several years. Our steel fabrication order backlog was up over 45% compared to this time last year.

Speaker #1: Order activity has been stronger than we have seen in a number of years. The increased demand has been led by several large markets, reducing the risk that any single sector derails the overall positive trajectory.

Speaker #1: The dodge momentum index, which generally leads construction spending, by a 12 to 18-month window, increased to its highest recent level, up more than 30% year over year.

Speaker #1: The increase was driven by commercial planning and accelerating institutional activity. Led by healthcare. The long-range project pipeline appears robust, supporting that idea, contractor project backlogs, also stood at over nine months in May, which is near the highest level in several years.

Speaker #1: Our steel fabrication order backlog was up over 45% compared to this time last year. We are also beginning to see improved pricing. We continue to have high expectations for the business this year due to positive customer sentiment, quoting activity, continued manufacturing onshoring, and public funding for infrastructure and other fixed asset investment programs.

Barry Schneider: We continue to have high expectations for the business this year due to positive customer sentiment, quoting activity, continued manufacturing onshoring, and public funding for infrastructure and other fixed asset investment programs. The uplift from this macro environment could be considerable. Our steel fabrication platform provides meaningful support for our steel mills, particularly critical in softer demand environments, allowing us to operate at higher through-cycle utilization rates than our peers. This also helps mitigate the financial risks associated with lower steel prices. Our metals recycling operations performed well during the quarter, benefiting from increased scrap availability and higher shipments as improved weather conditions supported stronger seasonal collection activity. We currently expect scrap pricing to stay relatively steady in the coming months.

Speaker #1: The uplift from this macro environment could be considerable. Our steel fabrication platform provides meaningful support for our steel mills, particularly critical in softer demand environments.

Speaker #1: Allowing us to operate at higher through-cycle utilization rates than our peers. This also helps mitigate the financial risks associated with lower steel prices. Our metals recycling operations perform well during the quarter, benefiting from increased scrap availability and higher shipments as improved weather conditions supported stronger seasonal collection activity.

Speaker #1: We currently expect scrap pricing to stay relatively steady in the coming months. The North American geographic footprint of our metals recycling platform provides a strategic competitive advantage for both our steel mills and our scrap-generating customers.

Barry Schneider: The North American geographic footprint of our metals recycling platform provides a strategic competitive advantage for both our steel mills and our scrap-generating customers. In particular, our Mexican operations strengthen the raw material positions of our Columbus and Sinton facilities. They also provide strategic support for aluminum scrap procurement for our flat rolled aluminum investments. Our metals recycling team is partnering even more closely with our steel and aluminum teams to expand scrap separation capabilities through enhanced processes and technology. This will help mitigate potential prime ferrous scrap supply challenges over time and provide a meaningful advantage in increased recycled content in our aluminum flat roll products, while also expanding our earnings opportunities. The steel team delivered a solid quarter with record shipments of 3.7 million tons.

Speaker #1: In particular, our Mexican operations strengthened the raw material positions of our Columbus and Sentin facilities. They also provide strategic support for aluminum scrap procurement for our flat-rolled aluminum investments.

Speaker #1: Our metals recycling team is partnering even more closely with our steel and aluminum teams to expand scrap separation capabilities through enhanced processes and technology.

Speaker #1: This will help mitigate potential prime ferrous scrap supply challenges over time and provide a meaningful advantage in increased recycled content in our aluminum flat-rolled products.

Speaker #1: While also expanding our earnings opportunities. The steel team delivered a solid quarter with record shipments of 3.7 million tons. During the second quarter of 2026, the domestic steel industry operated at an estimated production utilization rate of 81%, while our steel mills operated at 90%.

Barry Schneider: During Q2 2026, the domestic steel industry operated at an estimated production utilization rate of 81%, while our steel mills operated at 90%. We consistently achieve higher utilization due to our value-added product diversification, differentiated customer supply chain solutions, and the support of our internal manufacturing businesses. This higher through-cycle utilization is a key competitive advantage supporting our strong and growing cash generation and best-in-class financial metrics. Regarding flat rolled steel markets, conditions are strong as solid demand and lean inventory levels support a tight market environment. Lead times are elevated and customers continue to express optimism. Within flat rolled steel, we are also seeing continued improvement in value-added pricing spreads, which have returned to more normalized levels, benefiting from the impact of the core trade cases successfully resolved last year. Long product steel markets are also strong, driven by strength in non-residential construction.

Speaker #1: We consistently achieve higher utilization due to our value-added product diversification, differentiated customer supply chain solutions, and the support of our internal manufacturing businesses. This higher through-cycle utilization is a key competitive advantage supporting our strong and growing cash generation, and best-in-class financial metrics.

Speaker #1: Regarding flat-rolled steel markets, conditions are strong, as solid demand and lean inventory levels support a tight market environment. Lead times are elevated, and customers continue to express optimism.

Speaker #1: Within flat-rolled steel, we are also seeing continued improvement in value-added pricing spreads, which have returned to more normalized levels, benefiting from the impact of the core trade cases successfully resolved last year.

Speaker #1: Long product steel markets are also strong, driven by strength in non-residential construction. We believe this strength will continue, especially within structural steel and railroad products.

Barry Schneider: We believe this strength will continue, especially within structural steel and railroad products. Special Bar Quality markets are also improving across multiple sectors, including industrial, manufacturing, and energy-related markets. Regarding the steel market environment, North American automotive production forecasts for 2026 are to remain in line with prior year. Despite a generally stable production environment, our specific automotive customer base continues to present us opportunities. We have strengthened our position as a supplier of choice for many US-based European and Asian automotive producers, driven in part by our lower carbon content steel offerings and differentiated value-added product capabilities. I already mentioned the strength of the non-residential construction market related to steel fabrication. This holds true for long product steel as well. Our platforms continue to benefit from ongoing reshoring trends and domestic manufacturing investments, which are supporting sustained demand across our end markets.

Speaker #1: Special bar quality markets are also improving across multiple sectors, including industrial, manufacturing, and energy-related markets. Regarding the steel market environment, North American automotive production forecasts for 2026 are expected to remain in line with the prior year.

Speaker #1: Despite a generally stable production environment, our specific automotive customer base continues to present us with opportunities. We have strengthened our position as a supplier of choice for many U.S.-based European and Asian automotive producers, driven in part by our lower-carbon-content steel offerings and differentiated value-added product capabilities.

Speaker #1: I already mentioned the strength of the non-residential construction market related to steel fabrication. This holds true for long product steel as well. Our platforms continue to benefit from ongoing reshoring trends and domestic manufacturing investments, which are supporting sustained demand across our end markets.

Speaker #1: In the energy sector, oil and gas activity remains strong, with pipe manufacturers already projecting increased demand. Demand for the solar market also continues to be very robust.

Barry Schneider: In the energy sector, oil and gas activity remains strong, with pipe manufacturers already looking into 2027 projects. Demand for the solar market also continues to be very robust. Additionally, we are seeing improved demand from the agricultural sector, although residential construction activity remains relatively subdued. We remain optimistic about demand for our diversified portfolio of value-added steel products and believe our end market exposure positions us well. Regarding trade policy, we believe in preserving a strong, durable trade framework that provides operational viability for US steel producers by disallowing unfairly traded foreign products. The current administration has based a 50% Section 232 tariff for imported steel on national security matters, fully supporting the industry long-term. We are also actively engaged with the USTR regarding the USMCA review to ensure there are no weakening regarding our protections, including melted and poured provisions.

Speaker #1: Additionally, we are seeing improved demand from the agricultural sector, although residential construction activity remains relatively subdued. We remain optimistic about demand for our diversified portfolio of value-added steel products and believe our end market exposure positions us well.

Speaker #1: Regarding trade policy, we believe in preserving a strong, durable trade framework that provides operational viability for U.S. steel producers by disallowing unfairly traded foreign products.

Speaker #1: The current administration has based a 15% Section 232 tariff for imported steel on national security matters, fully supporting the industry long-term. We are also actively engaged with the USTR regarding the USMCA review to ensure there are no weakening regarding our protections, including melted and poured provisions.

Speaker #1: The administration has launched new Section 301 investigations targeting countries that both flood the market with excess steel and rely on forced labor in its production.

Barry Schneider: The administration has launched new Section 301 investigations targeting countries that both flood the market with excess steel and rely on forced labor in its production. We are specifically advocating for these remedies to be additive to the existing 232 steel tariffs. We are advancing legislative and regulatory priorities to create meaningful demand for our steel, particularly through investments in infrastructure, shipbuilding, and the power sector. On the demand side, we are working closely with Congress to strengthen Buy American steel requirements in the SHIPS for America Act and the Federal Highway Bill, turning large public spending vehicles into volume opportunities for our steel businesses. Now back to you, Mark.

Speaker #1: We are specifically advocating for these remedies to be additive to the existing 232 steel tariffs. We are advancing legislative and regulatory priorities to create meaningful demand for our steel, particularly through investments in infrastructure, shipbuilding, and the power sector.

Speaker #1: On the demand side, we're working closely with Congress to strengthen Buy American Steel requirements in the Ships for America Act and the Federal Highway Bill, turning large public spending vehicles into volume opportunities for our steel businesses.

Speaker #1: And now, back to you, Mark.

Speaker #2: Thank you, Barry. Thank you, Theresa. All well said. Consistently achieving such positive results, year upon year, doesn't just happen. It reflects the dedication of our teams and the effective strategies we have developed and executed over time.

Mark Millett: Thank you, Barry. Thank you, Theresa. All well said. Consistently achieving such positive results year upon year doesn't just happen. It reflects the dedication of our teams and the effective strategies we have developed and executed over time. We have invested strategically to successfully achieve significant scale, high margin product to market diversification, efficient and unique customer supply chains, and synergistic operating platforms to optimize market opportunities throughout economic cycles. When combined with our performance-driven compensation culture, these strategies enable us to consistently achieve at the highest levels and outperform competitors across all market cycles. Our foundational focus on market and product diversification, particularly in higher margin value-added products, supports stronger through cycle facility utilization and drives superior financial performance. We optimize cash generation, which enables a balanced and consistent capital allocation strategy that supports growth, maintains financial strength, and delivers compelling long-term returns to our shareholders.

Speaker #2: We have invested strategically to successfully achieve significant scale. High margin product-to-market diversification, efficient and unique customer supply chains, and synergistic operating platforms to optimize market opportunities throughout economic cycles.

Speaker #2: When combined with our performance-driven compensation culture, these strategies enable us to consistently achieve at the highest levels and outperform competitors across all market cycles.

Speaker #2: Our foundational focus on market and product diversification, particularly in higher-margin, value-added products, supports stronger through-cycle facility utilization and drives superior financial performance. We optimize cash generation, which enables a balanced and consistent capital allocation strategy that supports growth, maintains financial strength, and delivers compelling long-term returns to our shareholders.

Speaker #2: Our disciplined approach to the capital investment continues to generate strong through-cycle cash flow, and supports one of the highest return on invested capital profiles in the industrial sector.

Mark Millett: Our disciplined approach to the capital investment continues to generate strong through-cycle cash flow and supports one of the highest return on invested capital profiles in the industrial sector. The most recent and most significant current investment is in aluminum flat roll products. As I mentioned in the last call, the excitement and the pride of the aluminum team is absolutely incredible. It is inspiring to watch them transition from construction and commissioning into full-scale production, serving customers with the high-quality products they expect from Steel Dynamics. The team has outperformed all expectations, constructing and commissioning an incredible facility in industry-leading time. Competitors and customers alike that have toured the mill were amazed at the quality and the capability of the plant and the speed of product qualification. The team is navigating a volatile aluminum market driven by the impacts of geopolitical conflict and domestic supply chain challenges.

Speaker #2: The most recent and most significant current investment is in aluminum flat-rolled products. And as I mentioned in the last call, the excitement and the pride of the aluminum team is absolutely incredible.

Speaker #2: It is inspiring to watch them transition from construction and commissioning into full-scale production, serving customers with the high-quality product they expect from Steel Dynamics.

Speaker #2: The team’s outperformed all expectations, constructing and commissioning an incredible facility in industry-leading time. Competitors and customers alike who have toured the mill are amazed at the quality and the capability of the plant, and the speed of product qualification.

Speaker #2: The team's navigating a volatile aluminum market, driven by the impacts of geopolitical conflict and domestic supply chain challenges. But despite these near-term challenges, they've remained focused on execution, customer service, and operational excellence.

Mark Millett: Despite these near-term challenges, they've remained focused on execution, customer service, and operational excellence. Beyond these temporary constraints, though, we are operating in a unique and highly favorable long-term market environment. The United States faces a significant structural supply deficit of more than 1.4 million metric tons of aluminum sheet, and that shortfall is forecast to widen as demand continues to grow across key end markets. Combined with appropriate tariffs on imported aluminum products, this supply imbalance is further strengthening the value proposition for domestic producers. We believe our aluminum platform is exceptionally well-positioned to capitalize on the growing domestic demand, creating substantial long-term value for our shareholders. This investment is in clear alignment with our core competencies. Our construction capabilities have once again been proven. Both Columbus and the cast house at Saint Marie, Louisiana are state-of-the-art facilities built cost-effectively and in record time.

Speaker #2: Beyond these temporary constraints, though, we are operating in a unique and highly favorable long-term market environment. The United States faces a significant structural supply deficit of more than $1.4 million metric tons of aluminum sheet, and that shortfall is forecast to widen as demand continues to grow across key end markets.

Speaker #2: Combined with appropriate tariffs on imported aluminum products, this supply imbalance is further strengthening the value proposition for domestic producers. We believe our aluminum platform is exceptionally well positioned to capitalize on growing domestic demand, creating substantial long-term value for our shareholders.

Speaker #2: This investment is in clear alignment with our core competencies. Our construction capabilities have once again been proven—both Columbus and the cast house at San Luis Potosí are state-of-the-art facilities, built cost-effectively and in record time.

Speaker #2: We're using our deep operational know-how, in combination with the technical expertise of aluminum industry experts. And our proven incentive-driven performance culture will drive higher efficiency and lower cost operations compared to the competitors.

Mark Millett: We're using our deep operational know-how in combination with the technical expertise of aluminum industry experts, our proven incentive-driven performance culture will drive higher efficiency and lower cost operations compared to the competitors. We also believe we have an advantaged commercial position. Two-thirds of our existing carbon flat rolled steel customers also consume and process aluminum flat rolled sheet. Our growth in the automotive sector will complement our existing steel position and provide customer material optionality. The beverage can market will provide countercyclical market diversification, and the more stable earnings profile within the aluminum space will further enhance the consistency of our through-cycle cash generation. Our metals recycling platform will facilitate higher recycled content. We're the largest North American metals recycler, which includes aluminum. Our knowledgeable teams have developed new separation technologies, amplifying the supply chain value while providing greater access to usable aluminum scrap.

Speaker #2: We also believe we have an advantaged commercial position. Two-thirds of our existing carbon flat-rolled steel customers also consume and process aluminum flat-rolled sheet. Our growth in the automotive sector will complement our existing steel position and provide customer material optionality.

Speaker #2: The beverage can market will provide counter-cyclical market diversification, and the more stable earnings profile within the aluminum space will further enhance the consistency of our through-cycle cash generation.

Speaker #2: Our metals recycling platform will facilitate higher recycled content, where the largest North American metals recycler, which includes aluminum, our knowledgeable teams have developed new separation technologies amplifying the supply chain value while providing greater access to usable aluminum scrap.

Speaker #2: Though production to date is confirming our expected cost differentiation, when operating at our nameplate capacity and expected product mix, through-cycle EBITDA expectation for normalized market conditions remains at $650 to $700 million.

Mark Millett: Production to date is confirming our expected cost differentiation. When operating at our nameplate capacity and expected product mix, through cycle EBITDA expectation for normalized market conditions remains at $650 to 700 million, plus another $40 to 50 million for our metals recycling platform. Operating experience today, albeit in ramp-up, is verifying the five key competitive cost advantages: labor efficiency, higher recycled content, higher yields, optimized logistics, all driven by a performance-based operating culture utilizing state-of-the-art equipment. This strategic investment is cost-effective and a high return growth opportunity, providing Steel Dynamics with additional countercyclical diversification, while further stabilizing and growing our cash generation capabilities. The customer base is proving to be eager for a new market entrant, one that is known to be innovative, customer-focused, and responsive. We view business relationships as long-term, founded on trust, with a continuous goal of creating mutual value.

Speaker #2: Plus another $40 to $50 million for our metals recycling platform. Operating experience to date, albeit in ramp-up, is verifying five key competitive cost advantages: labor efficiency, higher recycle content, higher yields, optimized logistics—all driven by our performance-based operating culture utilizing state-of-the-art equipment.

Speaker #2: This strategic investment is cost-effective and a high-return growth opportunity, providing Steel Dynamics with additional countercyclical diversification while further stabilizing and growing our cash generation capabilities.

Speaker #2: The customer base is proving to be eager for a new market entrant—one that is known to be innovative, customer-focused, and responsive. We have viewed business relationships as long-term, founded on trust, with a continuous goal of creating mutual value.

Speaker #2: Not just simply financial value, but we will provide new supply chain solutions, new products with preferred quality and service. With that said, every startup and ramp-up brings its share of challenges.

Mark Millett: Not just simply financial value, we will provide new supply chain solutions, new products, with preferred quality and service. With that said, every startup and ramp-up brings its share of challenges. I'd like to sincerely thank our customers for their patience and partnership as we continue to fine-tune our operations and optimize performance. Their trust and their support have been invaluable, and we remain focused on delivering the highest quality products, reliability, and the service they deserve. The hot side is fully operational, with the ability to run at rated capacity. Two of the three cold mills continue to increase production, while the third and final cold mill started this month. This will allow us to have the full 650,000 metric tons annual capability. The first of two automotive continuous anneal and solution heat treat lines is fully operational.

Speaker #2: I'd like to sincerely thank our customers for their patience and partnership as we continue to fine-tune our operations and optimize performance. Their trust and support have been invaluable, and we remain focused on delivering the highest quality products, reliability, and service they deserve.

Speaker #2: The hot side is fully operational, with the ability to run at rated capacity. Two of the three coal mills continue to increase production while the third and final coal mill started this month.

Speaker #2: This will allow us to have the full 650,000 metric ton annual capability. The first of two automotive continuous anneal and solution heat treat lines is fully operational.

Speaker #2: We achieved finished product qualification status at multiple automotive manufacturers for 5182 and 5754 products, and we are currently in trials for 6000 series alloys.

Mark Millett: We achieved finished product qualification status at multiple automotive manufacturers for 5182 and 5754 products. We are currently in trials for 6000 series alloys. I think you would agree, it's an absolutely phenomenal achievement when you consider the mill has only been running for a little around 12 months. The second CASH line is expected to be start commissioning in Q4 of this year. The team is incredibly excited with the earlier-than-anticipated product certifications. It's a testament to the incredible talent we have been able to embed in the team and the technical capabilities of the mill. There's great energy and great momentum. As we move through construction, commissioning, and ramping of the various production units, we're encouraged by our progress with expectations for significant cost and product mix optimization benefits to occur in the near term.

Speaker #2: I think you would agree it's an absolutely phenomenal achievement when you consider the mill has only been running for a little over 12 months.

Speaker #2: The second cash line is expected to be start commissioning in the fourth quarter of this year. The team is incredibly excited with the earlier than anticipated product certifications.

Speaker #2: It's a testament to the incredible talent we have been able to embed in the team and the technical capabilities of the mill. There's great energy and great momentum.

Speaker #2: As we move through construction, commissioning, and ramping of the various production units, we're encouraged by our progress, with expectations for significant cost and product mix optimization benefits to occur in the near term.

Speaker #2: We believe volume and profitability from our aluminum operations will increase sharply in the second half of 2026 and continue improving through 2027 as startup costs subside, utilization and yields improve, and scrap content increases.

Mark Millett: We believe volume and profitability from our Aluminum Dynamics operations will increase sharply in H2 of 2026 and continue improving through 2027 as startup costs subside, utilization and yields improve, and scrap content increases. The aluminum flat roll mill itself produced 84,000 metric tons in Q2, which is approximately 50% of capability, with expectations to exit 2026 at a monthly production rate of at least 90% capacity, allowing for full volume capability in 2027. We remain highly enthusiastic about our current and future growth initiatives, which we believe will continue to drive the high return growth momentum we have consistently demonstrated. This through-cycle earnings potential of over $1.4 billion from our recent growth projects is becoming a reality. Capital funding is substantially complete, and operational optimization is our focus for both our recent flat rolled steel and aluminum investments.

Speaker #2: The aluminum flat-roll mill itself produced 84,000 metric tons in the second quarter, which is approximately 50% of capability. With expectations to exit 2026 at a monthly production rate of at least 90% capacity.

Speaker #2: Allowing for full volume capability in ’27. So we remain highly enthusiastic about our current and future growth initiatives, which we believe will continue to drive the high-return growth momentum we have consistently demonstrated.

Speaker #2: The through-cycle earnings potential of over $1.4 billion from our recent growth projects is becoming a reality. Capital funding is substantially complete, and operational optimization is our focus for both our recent flat-rolled steel and aluminum investments.

Speaker #2: I'm encouraged by the growing recognition among our teams - our customers and investors - of the strength and consistency of our cash generation, coupled with our disciplined, high-return approach to capital allocation.

Mark Millett: I'm encouraged by the growing recognition among our teams, our customers, and investors, of the strength and consistency of our cash generation, coupled with our disciplined high return approach to capital allocation. We believe the steel industry has undergone a fundamental paradigm shift in recent years, supported by an increasingly mercantilist global trade environment. This will help maintain a more level playing field through continued and appropriate trade enforcement mechanisms, as Barry described already. We expect continued growth in fixed asset investment, which remains a key driver of demand for metal products. New and reshoring of manufacturing continues to gain momentum, and together with growing fixed asset investment, will continue to support non-residential construction activity.

Speaker #2: We believe the steel industry has undergone a fundamental paradigm shift in recent years, supported by an increasingly mercantilist global trade environment. This will help maintain a more level playing field through continued and appropriate trade enforcement mechanisms, as Barry described already.

Speaker #2: We expect continued growth in fixed asset investment, which remains a key driver of demand for metal products. New and reassuring of manufacturing continues to gain momentum and, together with growing fixed asset investment, will continue to support non-residential construction activity.

Speaker #2: As decarbonization initiatives accelerate, the resulting increase in cost structures across the world will materially steepen the global cost curve. Enhancing Steel Dynamics' competitive position and driving opportunities for market share gains and expanded metal spreads.

Mark Millett: As decarbonization initiatives accelerate, the resulting increase in cost structures across the world will materially steepen the global cost curve, enhancing Steel Dynamics' competitive position and driving opportunities for market share gains and expanded metal spreads. Our highly diversified value-added product capabilities provide a distinct competitive advantage, allowing us to leverage the evolving metals market environment and amplify our relative earnings power. In closing, as I've said many times before, our people are our foundation. I thank each of them for their passion, their dedication, and commitment to our success. As they're committed to us, we are also committed to them. I remind each teammate listening today, nothing is more important than safety for you, your families, and one another. Please keep Elijah's family, friends, and teammates in your prayers, and resolve to work even smarter and harder to achieve an incident-free workplace. I also thank our loyal customers.

Speaker #2: Our highly diversified value-added product capabilities provide a distinct competitive advantage allowing us to leverage the evolving metals market environment and amplify our relative earnings power.

Speaker #2: In closing, as I've said many times before, our people are our foundation. I thank each of them for their passion, dedication, and commitment to our success.

Speaker #2: As they are committed to us, we are also committed to them. I remind each teammate listening today: nothing is more important than safety for you, your families, and one another.

Speaker #2: Please keep Elijah's family friends and teammates in your prayers. And resolve to work even smarter and harder to achieve an incident-free workplace. I also thank our loyal customers, as I said previously, our partnerships have built on trust, delivering on our commitments, and collaborating to create innovative solutions and value.

Mark Millett: As I said previously, our partnerships are built on trust, delivering on our commitments, and collaborating to create innovative solutions and value. Finally, I thank our suppliers and service providers. Your partnership, trust, and support are essential to what we do each and every day and to our continued success. Together, as a team, we look forward to creating new opportunities and shared success today and the years ahead. With that said, Matthew, would love to answer questions.

Speaker #2: And finally, I thank our suppliers and service providers, your partnership, trust, and support are essential to what we do each and every day and to our continued success.

Speaker #2: So together, as a team, we look forward to creating new opportunities and shared success today and the years ahead. And with that said, Matthew, I would love to answer questions.

Speaker #1: Thank you. If you'd like to ask a question, please signal by pressing the star key followed by the digit 1 on your telephone keypad.

Operator: Thank you. If you'd like to ask a question, please signal by pressing the star key, followed by the digit 1 on your telephone keypad. If you're using a speakerphone, please make sure your mute function is turned off to allow your signal to reach our equipment. If you pressed star 1 earlier during today's call, please press star 1 again to ensure our equipment has captured your signal. Also, we ask that you please limit yourself to 1 question and 1 follow-up to facilitate time for everyone. Any additional questions can be addressed upon reentering the queue. Your first question's coming from Lawson Winder from Bank of America. Your line is live. Once again, Lawson, your line is live.

Speaker #1: If you're using a speakerphone, please make sure your mute function is turned off to allow your signal to reach our equipment. If you press star 1 earlier during today's call, please press star 1 again to ensure our equipment has captured your signal.

Speaker #1: Also, we ask that you please limit yourself to one question and one follow-up to facilitate time for everyone. Any additional questions can be addressed upon re-entering the queue.

Speaker #1: Your first question is coming from Lawson Winder from Bank of America. Your line is live. And once again, Lawson, your line is live.

Speaker #3: Yeah, hi. Thank you, operator. This is Satish Aunt for Barry. My first question is on the steel fabrication operations. You mentioned that the ordering activity is strong and that the backlogs are 45% higher year on year, and that pricing is beginning to improve, yet the pricing realized for Q2 was a bit lower than Q1.

[Analyst] (Bank of America): Yeah. Hi. Thank you, operator. This is Sathish on for Lawson. Good morning, Mark, Theresa, and Barry.

Mark Millett: Good morning.

[Analyst] (Bank of America): My first question is on the steel fabrication operations. You mentioned that the ordering activity is strong and then the backlogs are 45% higher year-on-year, and the pricing is beginning to improve. Yet the pricing realized for Q2 was a bit lower than Q1. How should we think about the pricing or the margin outlook for the H2 of 2026?

Speaker #3: So, how should we think about the pricing or the margin outlook for the second half of 2026?

Speaker #4: Satish, thanks for the question. As it relates to the pricing, the pricing that's going into the backlog right now is at improved levels, but that doesn't necessarily mean that's realized in the second half of this year.

Theresa Wagler: Satish, thanks for the question. As it relates to the pricing, the pricing that's going into the backlog right now is at improved levels, but that doesn't necessarily mean that that's realized in the H2 of this year. Some of those projects are in the Q4 and actually being placed into 2027. You'll continue to see pricing, I think, remain pretty stable as far as from a realized pricing perspective. The increases you should expect to see Probably in the next six to nine months from a pricing perspective. Barry's nodding, so that means I got it right. Yeah. You also just take into consideration what we're seeing in the steel side of the equation for steel input costs.

Speaker #4: Some of those projects are in the fourth quarter and actually being placed into 2027. So you'll continue to see pricing, I think, remain pretty stable as far as from a realized pricing perspective.

Speaker #4: But the increases you should expect to see probably in the next six to nine months from a pricing perspective. Barry's nodding and that means I got it right.

Speaker #4: But yeah, and then also just take into consideration what we're seeing in the steel side of the equation for steel input costs. But that said, volume is expected to be really strong for the second half of this year and into next year for fabrication, and volume helps offset some of that.

Theresa Wagler: That said, volume is expected to be really strong for the H2 of this year and into next year for fabrication, and volume helps offset some of that.

Speaker #3: Thank you. Off the 45% higher backlogs, is there any way you can share how much of it is volume versus pricing?

[Analyst] (Bank of America): Thank you. Of the 40% higher backlogs, is there any way you can share how much of it is volume versus pricing?

Theresa Wagler: Sathish, you cut out a little bit. You said for the 45% increase in order activity, what was the question? I'm sorry. You broke up.

Speaker #4: Satish, you cut out a little bit. You said for the 45% increase in order activity—what was the question? I'm sorry, you broke up.

Speaker #3: How much is related to pricing versus volumes?

[Analyst] (Bank of America): How much is related to pricing versus volumes?

Speaker #4: Oh, the 45% increase is volume-specific. It's not pricing-specific.

Theresa Wagler: The 45% increase is volume specific. It's not pricing specific.

Speaker #3: Okay. Thank you.

[Analyst] (Bank of America): Okay. Thank you.

Speaker #1: Thank you. Your next question is coming from Nick Cash from Goldman Sachs. Your line is live.

Operator: Thank you. Your next question is coming from Nick Cash from Goldman Sachs. Your line is live.

Speaker #5: Hi, team. Good morning. And thank you for taking the question. Just a question on aluminum, on the shipments of 53,000 tons this quarter. I guess my first question is, what was the mix on that?

Nick Cash: Hi, team. Good morning, and thank you for taking the question. Just a question on aluminum, on the shipments of 53,000 tons this quarter. I guess my first question is, what was the mix on that? I think in Q1, you mentioned it could potentially shifting to a little higher on the BevCan side.

Speaker #5: I think in one queue you mentioned it could potentially be shifting to a little higher on the BevCan side?

Speaker #2: Yeah. The shift in the preeminent increase was Kanji. We're also finishing up automotive hot-vent shipments, and some industrial.

Mark Millett: Yeah, it shifted. The preeminent increase was can sheet. We are also finishing up automotive hot band shipments, and some industrial.

Speaker #5: Okay, that's helpful. And there's a follow-up on that. You mentioned on the call today, in the second half of '26, or the remainder of this year, as scrap content increases, it's going to help drive profitability.

Nick Cash: Okay, that's helpful. Just to follow up on that, you mentioned on the call today, in H2 2026 or the remainder of this year, as scrap content increases, it's going to help drive profitability. Are you guys currently not operating at, I guess, your most optimal scrap mix with what you're producing? Then on the back of that, I guess, what's the interplay with the scrap mix as you move into some automotive shipments in the end of the year, which I believe, and correct me if I'm wrong, requires a little bit more prime metals?

Speaker #5: Are you guys currently not operating at, I guess, your most optimal scrap mix with what you're producing? And then on the back of that, I guess, what's the interplay with the scrap mix as you move into some automotive shipments in the end of the year, which I believe - and correct me if I'm wrong - requires a little bit more prime metals?

Speaker #2: Yeah. You've got to remember we're commissioning and ramping up and starting up, and so there's no way, even though I wish it would be this way, that we'd be optimal in anything we do.

Mark Millett: Yeah. You got to remember, we're commissioning and ramping up and starting up. There's no way, even though I wish it would be this way, that we'd be optimal in anything we do, in all honesty. Although the team is doing a phenomenal job for where they are at this moment in time. We are using probably in the order of about 80% scrap for our can sheet, give or take a little bit. That will continue to grow. Automotive, I believe we're probably sort of 40-60 P1020 in scrap at this moment.

Speaker #2: In all honesty, although the team is doing a phenomenal job for where they are at this moment in time, we are using probably in the order of about 80% scrap for our Kanji, give or take a little bit.

Speaker #2: That will continue to grow. Automotive, I believe we're probably sort of 40/60 P1020 in scrap at this moment.

Speaker #5: That's very helpful. Thank you so much. I'll pass it on.

Nick Cash: That's very helpful. Thank you so much. I'll pass it on.

Speaker #1: Thank you. Your next question's coming from Carlos de Alba from Morgan Stanley. Your line is live.

Operator: Thank you. Your next question's coming from Carlos de Alba from Morgan Stanley. Your line is live.

Speaker #3: Yeah. Thank you. Good morning, Theresa, Mark, and Barry. On the aluminum remaining on the aluminum business, beyond the impairment, the 16 million dollar impairment, is there any impact on capex operating cost and ramp-up schedule or maybe the ramp-up schedule is going to be delayed?

Carlos de Alba: Yeah, thank you. Good morning, Theresa, Mark, and Barry. On the aluminum, remaining on the aluminum business. Beyond the impairment, the $16 million impairment, is there any impact on CapEx, operating cost, and ramp-up schedule? Maybe obviously the ramp-up schedule is going to be delayed, but of moving the location of your alloy cast house in the US?

Speaker #3: But of moving the location of your alley cast house in the US?

Speaker #2: I would say, operationally, only incremental. The logistics of bringing—because we'll still be sourcing UBCs from the West Coast, although it'll only be about 60% to 70%, as opposed to the 100% that would have gone in the mill.

Mark Millett: I would say operationally, only incremental. The logistics of bringing Because we'll still be sourcing UBCs from the West Coast, although it'll only be about 60% to 70%, as opposed to the 100% that would have gone in the mill. That's just incremental cost. OpEx would be the same. Again, we took the $16 million write-down for the Benson costs, and the CapEx at Columbus is going to rise, I think, in the order of $10 million to $20 million. That's, in all honesty, more to do with just inflation of construction contractors more than anything else.

Speaker #2: But that's just incremental cost. Opex would be the same. Again, we took the $16 million write-down for Benson costs. And the capex at Columbus is going to rise, I think, in the order of $10 to $20 million.

Speaker #2: And that's, in all honesty, more to do with just inflation of construction contractors more than anything else. But the move is not significant. But as you point out, obviously, the ramp is delayed.

Carlos de Alba: All right. Thank you.

Mark Millett: The move is not significant. As you point out, obviously, the ramp is delayed for internal supply.

Speaker #2: For internal supply.

Speaker #3: Mark, when do you expect the second gas house to be at 100% utilization, or can you share the ramp-up schedule?

Carlos de Alba: Mark, when do you expect to maybe this second alloy cast house to be at 100% utilization or the ramp-up schedule?

Speaker #2: We certainly expect that in the first half of next year.

Mark Millett: Certainly H1 of next year.

Speaker #3: All right. Great, thank you. And if I may, very quickly—Theresa, any comments on working capital? EBITDA came ahead of expectations, but obviously, working capital was higher because of pricing, primarily.

Carlos de Alba: All right, great. Thank you. If I may, very quickly, Theresa, any comments on working capital? EBITDA came ahead of expectations, obviously working capital was higher because of pricing, primarily. How do you see working capital in Q3 and H2 of the year? Q3 and H2 of the year?

Speaker #3: How do you see working capital in the third and second half of the year? Third quarter and second half of the year.

Speaker #4: Yeah, no, it's a fair question. So, working capital really did increase in the second quarter more than we anticipated, but that was based on company-wide increases in pricing across all the operations, which is good because the customer accounts remain very strong.

Theresa Wagler: Yeah, no, it's a fair question. Working capital really did increase in Q2 more than we anticipated, that was based on company-wide increases in pricing across all the operations, which is good because the customer accounts remain very strong. That's eventual cash flow. We see that working capital should be a funding to, certainly neutral, but I would suggest a funding source in H2 of the year.

Speaker #4: So that's eventual cash flow. But we see that working capital should be a funding—certainly neutral, but I would suggest a funding source in the second half of the year.

Speaker #3: Thank you.

Carlos de Alba: Thank you.

Speaker #1: Thank you. Your next question is coming from Martin Englert from Seaport Research Partners. Your line is live.

Operator: Thank you. Your next question's coming from Martin Englert from Seaport Research Partners. Your line is live.

Speaker #6: Hello. Good morning, everyone.

Martin Englert: Hello. Good morning, everyone.

Speaker #2: Good morning.

Mark Millett: Good morning.

Speaker #6: Kind of a follow-up question on moving this lab facility but related to the rolling mill in Columbus. If there was some greater upstream slab capability at the Columbus location or elsewhere, what's the maximum capacity of the rolling asset if there were no slab constraints upstream?

Martin Englert: Kind of a follow-up question on moving the slab facility, related to the rolling mill in Columbus. If there was some greater upstream slab capability at the Columbus location or elsewhere, what's the maximum capacity of the rolling asset if there were no slab constraints upstream?

Speaker #4: It's 630. The rolling mill is at it has a maximum capacity of 650,000 metric tons per year.

Theresa Wagler: It's 650. The rolling mill has a maximum capacity of 650,000 metric tons per year.

Speaker #6: Okay. So, there are no constraints upstream? If you add additional slab casters or something, you won't get more capacity out of it, correct?

Martin Englert: Okay. There's no constraints upstream. If you add additional slab casters or something, you won't get more capacity out of it, correct?

Speaker #2: That yes. But I would stress the 650 is nameplate. And our teams always seem to be able to squeeze a little bit more out of it, but that's not going to be seen for two or three or four years, so.

Mark Millett: Yes. I would stress the 650 is nameplate, and our teams always seem to be able to squeeze a little bit more out of it. That's not going to be seen for two or three or four years.

Speaker #6: Okay. Understood. If I could, one follow-up. If you could just explain the difference for aluminum products between the cash find product that you're working on for automotive applications and a kelp line product, and if there's any asset crossover there, does adding something like a surface treatment line allow you to produce kelp in the future, or is it more nuanced than that?

Martin Englert: Okay, understood. If I could, one follow-up, if you could just explain the difference for aluminum products between the CASH line product that you're working on for automotive applications and a CALP line product, and if there's any asset crossover there. Does adding something like a surface treatment line allow you to produce CALP in the future, or is it more nuanced than that?

Speaker #2: I can't give you the nuances of the differences in technology. In all honesty, between the you said cash line and.

Mark Millett: I can't give you the nuances of the differences in technology, in all honesty. You said CASH line and

Speaker #4: Kelp.

Speaker #6: And kelp line, continuous and annealing line with pre-treatment. It tends to lean, I think, towards more exposed automotive?

Theresa Wagler: Kelp.

Martin Englert: CALP line. Continuous annealing line with pretreatment. It tends to lean, I think, towards more exposed automotive.

Mark Millett: The CASH line that we have, the pretreatment and everything, is fully capable of exposed automotive, I do believe. In fact, I'm pretty damn sure. It's already been shipped and qualified by a couple of automotive guys over in the States.

Speaker #2: We the cash line, we have the pre-treatment and everything is fully capable of exposed automotive. I do believe. In fact, I'm pretty damn sure.

Speaker #2: Because it's already been shipped and qualified by a couple of automotive guys over in the States.

Speaker #6: Okay. Appreciate the detail. Thank you.

Martin Englert: Okay. Appreciate the detail. Thank you.

Speaker #1: Thank you. Your next question is coming from Tim Nattanners from Wells Fargo. Your line is live.

Operator: Thank you. Your next question's coming from Timna Tanners from Wells Fargo. Your line is live.

Speaker #7: Yeah. Hi. Good morning. I wanted to ask about the broader aluminum guidance still at 650 to 700 million through cycle profitability. Just wondering, of course, in light of the higher aluminum futures market from when you first announced the project, in light of the pretty sticky lower cost for scrap, what does it take to start thinking about a different forecast there?

Timna Tanners: Yeah. Hi, good morning.

Mark Millett: Hello.

Timna Tanners: I wanted to ask about the broader aluminum guidance still at $650 to 700 million through cycle profitability. Just wondering, of course, in light of the higher aluminum futures market from when you first announced the project, in light of the pretty sticky lower cost for scrap, what does it take to start thinking about a different forecast there?

Speaker #2: Well, Tim, that's a great question. But we are fully focused on the job at hand, and that's just executing and getting things up and running.

Mark Millett: Timna, it's a great question. We are fully focused on the job at hand, and that's just executing and getting things up and running. I would say there's absolutely no doubt, as I said, even though we're in ramp-up, we can see that the plant clearly demonstrated the 650 to 700 in a normalized environment. If today's environment remains, obviously, yeah, there'll be some upside, but we're not contemplating that or calculated that.

Speaker #2: I would say there's absolutely no doubt as I said, even though we're in ramp-up, we can see that the slab will clearly demonstrate the 650 set to 700 in a normalized environment.

Speaker #2: environment remains then obviously, yeah, there'll be some upside. But we're not contemplating that or not calculated that.

Speaker #4: Well, actually, Tim, you and I have spoken about it, and we've discussed it at the conferences. The full intent is to allow the teams to get the cost structures aligned to using more scrap content, etc.—all the things that Mark mentioned.

Theresa Wagler: Well, actually, Timna, you and I have spoken about it, and we've spoken about it at the conferences. The full intent is to allow the teams to get the cost structures aligned, get to using more scrap content, et cetera, all the things that Mark mentioned. Which we think will take through Q3, because remember, we're just getting the third cold mill up and running in July, August timeframe. The last CASH line will be Q4. We want to make sure that we actually have everything dialed in before we start to talk about numbers that are higher than what we've suggested in the past. You're not wrong in the fact that the spreads available today are considerably higher than what we would have included in our 650 to 700.

Speaker #4: Which we think will take through the third quarter, because remember, we're just getting the third coal mill up and running in the July–August timeframe.

Speaker #4: The last cash line will be fourth quarter, so we want to make sure that we actually have everything dialed in before we start to talk about numbers that are higher than what we've suggested in the past.

Speaker #4: But you're not wrong in the fact that the spread's available today are considerably higher than what we would have included in our 650 to 700.

Speaker #4: And in time, in the shorter-term rather than the longer-term, we will address it.

Theresa Wagler: In time here, in the shorter term rather than longer term, we will address it.

Speaker #7: Okay, that's helpful. Thanks. One follow-up, if I could, on aluminum. So, of course, there's been a lot of attention recently on some incentives to focus on primary aluminum capacity built in the U.S.

Timna Tanners: Okay. That's helpful. Thanks. One follow-up, if I could, on aluminum. Of course, there's been a lot of attention recently on some incentives to focus on primary aluminum capacity built in the US. In a way, you're also adding aluminum capacity through producing slab from scrap, right? Is there not any discussion with the administration of also incentivizing or supporting this alternative source of aluminum that is also adding to our national security of aluminum in this country?

Speaker #7: But in a way, you're also adding aluminum capacity through producing slab from scrap, right? So, is there not any discussion with the administration of also incentivizing or supporting this alternative source of aluminum that is also adding to our national security of aluminum in this country?

Speaker #2: I would say yes, that there are discussions. But going back to your point, Tim, the smelting—the primary aluminum that they're producing—is just that.

Mark Millett: I would say yes, that there are discussions. Going back to your point, Timna, the smelting, the primary aluminum that they're producing is just that. It's primary aluminum. I don't believe they intend to put in any ingot casting initially. It's not actually affecting the ingot market.

Speaker #2: It's primary aluminum. I don't believe they intend to put in any ingot casting initially. So it's not actually affecting the ingot market.

Speaker #7: Okay. Great. Thank you.

Timna Tanners: Okay, great. Thank you.

Speaker #1: Thank you. Your next question is coming from Katja Jansik from BMO Capital Markets. Your line is live.

Operator: Thank you. Your next question's coming from Katja Jancic from BMO Capital Markets. Your line is live.

Speaker #7: Hi. Thank you for taking my questions. Mark, earlier you mentioned that the aluminum mill was operating at about a 50% utilization rate during Q2. Can you talk a bit about how the utilization rate progressed throughout the quarter?

Katja Jancic: Hi. Thank you for taking my questions. Mark, earlier you mentioned that the aluminum mill was operating at about 50% utilization rate during Q2. Can you talk a bit about how the utilization rate progressed throughout the quarter?

Speaker #2: It was kind of sequential; it just ramped up month over month.

Mark Millett: It was kind of sequential. It just ramped up month-over-month.

Speaker #7: So, what was the exit rate utilization? Could you provide that?

Katja Jancic: What was the exit rate utilization? Could you provide that?

Theresa Wagler: Katja, it was significantly higher in the June time frame. We averaged 50% for the quarter, so it was probably closer to maybe that 60%. Again, the team feels super good about that given the fact that we started up about nine months ago, and the fact that we're actually now producing automotive quality, can sheet quality, and we're ramping up pretty quickly. I think what you should expect to see is in H2, that ramp is forecast to accelerate pretty dramatically as we get the third cold mill, because we need that cold mill to reach the optimal capability of the rolling mill itself. More to come, but we think it should be a much steeper ramp in H2.

Speaker #4: Katja, it was significantly higher in the June timeframe, so we averaged 50% for the quarter. So it was probably closer to maybe that 60%.

Speaker #4: And again, the team feels super good about that, given the fact that we've started up about nine months ago, and the fact that we're now actually producing automotive-quality can sheet, and we're ramping up pretty quickly.

Speaker #4: But I think what you should expect to see is, in the second half of the year, that ramp is forecast to accelerate pretty dramatically.

Speaker #4: As we get the third coal mill—because we need that coal mill to reach the optimal capability of the rolling mill itself—so more to come, but we think it should be a much steeper ramp in the second half of the year.

Speaker #7: Okay. And maybe—and I fully recognize that this is still early—but can you remind us how we should think about CAPEX next year or what a reasonable range could be?

Katja Jancic: Okay. I fully recognize that this is still early, but can you remind us how we should think about CapEx next year or what a reasonable range could be?

Theresa Wagler: We're doing our longer-term capital planning, Katja, in the next month or so. Absent any significant additional items, I would think that we'd probably be in the range of that $500 to $600 million at maximum. Our sustained capital really is only around $250 to $300 million. If it was that amount, we would have some growth capital embedded in that as well. We're really not talking about 2027 yet in much granularity.

Speaker #4: Absent that, we're doing our longer-term capital planning, Katja, in the next month or so. But absent any significant additional items, I would think that we'd probably be in the range of that $500 to $600 million at maximum.

Speaker #4: Our sustained capital really is only around $250 million to $300 million. So if it was that amount, we would have some growth capital embedded in that as well.

Speaker #4: But we're really not talking about 2027 yet in much granularity.

Speaker #7: Okay. Thank you.

Katja Jancic: Okay. Thank you.

Speaker #1: Thank you. Your next question is coming from Tristan Gresser from BNP Paribas. Your line is live.

Operator: Thank you. Your next question is coming from Tristan Gresser from BNP Paribas. Your line is live.

Speaker #6: Yes. Hi, thank you for taking my questions. It's on the Steel division. Your ASP went up quite a lot in Q2. Scrap prices were relatively steady.

Tristan Gresser: Yes. Hi. Thank you for taking my questions. It's on the steel division. Your ASP went up quite a lot in Q2. Scraps prices were relatively steady, but your EBITDA per ton, I think is only up $60 per ton, which is already pretty great. What sort of other cost increase have you seen in the quarter, and how should we think about Q3 from a cost perspective?

Speaker #6: But your bid-up and done, I think, is only up $60 per ton, which is already pretty great. But what sort of other cost increases have you seen in the quarter?

Speaker #6: And how should we think about Q3 from a cost perspective?

Speaker #2: Tristan, I would say, as Theresa mentioned, our contracts have a lagging nature to them. So most of those are turning over into the higher pricing that we've seen through Q2.

Barry Schneider: Tristan, I would say, as Theresa mentioned, our contracts have a lagging nature to them. Most of those are turning over into the higher pricing that we've seen through Q2. We look forward to pricing increasing. We do believe scrap will go sideways. As far as other cost structures, we haven't seen significant impacts on any of our cost streams. We manage all those for the long haul. Right now, we're really concentrating on making sure we're on time for our customers and running at high utilization rates.

Speaker #2: So, we look forward to pricing increasing. We do believe scrap will go sideways. As far as other cost structures, we haven't seen significant impacts on any of our cost streams, so we manage all those for the long haul.

Speaker #2: And right now, we're really concentrating on making sure we're on time for our customers and running at high utilization rates.

Theresa Wagler: The teams had some maintenance outages at our three flat roll mills, but those are normal course, but would've increased cost a little bit, Barry.

Speaker #4: We did have the teams have some maintenance outages at our three flat roll mills, but those are normal—normal course. But would have increased cost a little bit, Barry.

Barry Schneider: Yeah. In Q2, we led with all the mills having an outage which is somewhat unusual, but it was the right time to take care of the stuff. Some of the costs were embedded in what you saw as the COGS in the Q2.

Speaker #2: Yeah. In Q2, we led with all the mills having an outage, which is somewhat unusual, but it was the right time to take care of the stuff.

Speaker #2: So, some of the costs were embedded in what you saw as the COGS in Q2.

Speaker #6: Okay, that's clear. And on the Steel division—I think for fabrication, you talk about a pretty strong H2 outlook from a volume perspective.

Tristan Gresser: Okay, that's clear. On the steel division, I think for fabrication, you talk about a pretty strong H2 outlook from a volume perspective. How should we think about your H2 outlook for the steel division?

Speaker #6: How should we think about your H2 outlook for the Steel division?

Speaker #2: The steel plants are all running with excellent backlogs right now. We are enjoying strength in all of the markets we participate in. Now that the spreads between the galvanized and the paint have resumed to somewhat normal, we're very bullish on what our coating facilities can do for us.

Barry Schneider: The steel plants are all running with excellent backlogs right now. We are enjoying strength in all of the markets we participate in. Now that the spreads between the galvanized and the paint have resumed to somewhat normal, we're very bullish on what our coating facilities can do for us. Our customers are all anxious to keep good business going. We remain really optimistic of where the steel plants are, and that's across the divisions. Long products, flat, all of our market segments.

Speaker #2: And our customers are all anxious to keep good business going. So we remain really optimistic about where the steel plants are, and that's across the divisions.

Speaker #2: Long products, flat, all of our market segments.

Speaker #3: Just correct me if I'm wrong, Barry, but just to calibrate that spread, I think we began the year, it was like $100.

Mark Millett: Just to, correct me if I'm wrong, Barry, but just to calibrate that spread, I think we began the year, it was like $100.

Speaker #2: A little less than $100 between galvanized and hot-rolled coils.

Barry Schneider: A little less than $100 between galvanized and hot rolled coil.

Speaker #3: And that was 200?

Mark Millett: Now it's $200?

Speaker #2: A little over 220 or so.

Barry Schneider: A little over 220 or so.

Speaker #3: Yeah.

Mark Millett: Yeah.

Speaker #6: Okay, all right. No, that's clear. And maybe one quick follow-up on the cost structure for the steel division. I mean, we're starting to see some noise around electricity costs rising for U.S. steelmakers.

Tristan Gresser: Okay. All right. No, that's clear. Maybe one quick follow-up on the cost structure for the steel division. We're starting to see some noise around electricity costs rising for US steelmakers. If you can share maybe your latest dollar per ton energy cost and how do you expect that to evolve moving forward, and remind us maybe of your contract structure, for steel and aluminum as well. That could be interesting. Thank you.

Speaker #6: If you can share maybe your latest dollar-per-ton energy cost, and how you expect that to evolve moving forward. And remind us, maybe, of your new contract structure for steel and aluminum as well.

Speaker #6: That could be interesting. Thank you.

Speaker #2: Electricity, certainly. There's a lot of discussion nationwide about electricity and the demand levels. We've seen the relative demand stay steady over the last couple of years.

Barry Schneider: Electricity. Certainly, there's a lot of discussion nationwide about electricity and the demand levels. We've seen the relative demand stay steady over the last couple of years. There is certainly concern about large users like data centers coming in, and that is a regional thing. We have completely different contracts at each of our steel facilities. That's just the nature of large loads. We are seeing ample support from all of our utility providers. We do benefit from running every hour of every week, so there's times at night when it's low demand that pricing reflects that. Our teams are very responsive. They see the real-time pricing in their pulpits. They make good business decisions based on that information. We see the markets around us move, but we're able to continuously run hard and optimize how we use that electricity, which is just as important.

Speaker #2: There is certainly concern about large users, like data centers, coming in. And that is a regional thing. We have completely different contracts at each of our STEEL facilities.

Speaker #2: That's just the nature of large loads. But we are seeing ample support from all of our utility providers. We do benefit from running every hour of every week.

Speaker #2: So, there are times at night when, due to low demand, pricing reflects that. Our teams are very responsive—they see the real-time pricing in their pulpits.

Speaker #2: They make good business decisions based on that information. So we see the markets around us move, but we're able to continuously run hard and optimize how we use that electricity, which is just as important.

Speaker #2: So, we don't see any aberration short-term, but we are concerned about the build-out and generation being added to the grid. We also want to see a more reliable grid—the grid itself.

Barry Schneider: We don't see any aberrations short term, but we are concerned about the build-out and generation being added to the grid. We also want to see a more reliable grid. The grid itself, there's areas in the country where reliability is a concern. We continue to work with our utilities and make sure they know what we do, how we consume power, and we support them. As far as aluminum, that's more of a natural gas play. I think where the storage is, we're comfortable. Again, we buy our energy wisely. We look at our needs, and we work with our providers regularly to make sure we're doing what they need us to do to be good customers. We help them be better suppliers for us.

Speaker #2: There are areas in the country where reliability is a concern. So we continue to work with our utilities and make sure they know what we do, how we consume power, and we support them.

Speaker #2: And as far as aluminum, that's more of a natural gas play. And I think we're comfortable with the storages. And again, we buy our energy wisely.

Speaker #2: We look at our needs, and we work with our providers regularly to make sure we're doing what they need us to do to be good customers.

Speaker #2: And we help them be better suppliers for us.

Speaker #1: All right. Perfect.

Mark Millett: All right. Perfect. Thank you.

Tristan Gresser: All right. Perfect. Thank you.

Speaker #6: Thank you.

Speaker #1: Thank you. Your next question is coming from Samuel McKinney from KeyBank Capital Markets. Your line is live.

Operator: Thank you. Your next question's coming from Samuel McKinney from KeyBanc Capital Markets. Your line is live.

Speaker #7: Hey, good morning.

Samuel McKinney: Hey, good morning.

Speaker #3: Good morning.

Barry Schneider: Good morning.

Speaker #7: Granted, we're coming off a low base, but steel imports have increased month over month over the last couple of months. In July, it's up noticeably versus June.

Samuel McKinney: Granted, we're coming off a low base. Steel imports have increased month-over-month over the last couple of months, and July is up noticeably versus June. Any concern on your end that steel pricing levels have finally caused customers to start seeking foreign sources in a more aggressive way?

Speaker #7: Any concern on your end that steel pricing levels have finally caused customers to start seeking foreign sources in a more aggressive way?

Speaker #2: Samuel, what I would add to that is, Barry, we are seeing certain countries shipping through the 232s. The offset pricing in the Asian markets has a lot to do with that.

Barry Schneider: Samuel, I would add to that is, Barry, we are seeing certain countries shipping through the 232s. The offset pricing in the Asian markets has a lot to do with that. The administration is looking closely at what these rates are, but we've been seeing very high accelerated rates of all steel exports from primarily three countries in Asia. These are disruptive. It is a response to their economies needing to export. The predatory mercantile economies have to find somewhere in the world to put their goods. We're hoping the administration looks at what quotas were in place in some of these countries prior, and they look at what exactly the 232 was meant to do and try to rein it back in. We believe the short-term disruption of these imports will hopefully be abated here in Q3, Q4.

Speaker #2: So the administration is looking closely at what these rates are, but we've been seeing very high, accelerated rates of all steel exports from primarily three countries in Asia.

Speaker #2: These are disruptive. It is a response to their economies needing to export. The predatory, mercantile economies have to find somewhere in the world to put their goods.

Speaker #2: We are hoping the administration looks at what quotas were in place in some of these countries prior, and they look at what exactly the 232 was meant to do and try to rein it back in.

Speaker #2: We believe the short-term disruption of these imports will, hopefully, be abated here in Q3 and Q4. But we remain competitive with all our customers, and the dialogue of getting steel when they need it and being on time is usually the big factor for what our customers are looking for.

Barry Schneider: We remain competitive with all our customers, and the dialogue of getting steel when they need it and being on time is usually the big factor for what our customers are looking for.

Speaker #7: Okay, thanks. And I appreciate there are a lot of moving parts as you start up ADI, but second quarter shipments of 53,000 tons came in.

Samuel McKinney: Okay, thanks. I appreciate there are a lot of moving parts as you start up ADI, but Q2 shipments of 53,000 tons came in, a little light of the guidepost you laid out on the last call. Any more detail you can provide on what got in the way of hitting that 60,000 to 70,000 ton mark you previously outlined, and what you're expecting into Q3?

Speaker #7: A little light on the guidepost you laid out on the last call. Any more detail you can provide on what got in the way of hitting that 60,000 to 70,000 ton mark?

Speaker #7: You previously outlined what you're expecting going into the third quarter.

Speaker #3: Yeah, it's all part of the learning curve, I would say. And as you perfect the different units through the mill, you find challenges or obstructions.

Mark Millett: Yeah, it's all part of the learning curve, I would say. As you perfect the different units through the mill, you find challenges or obstructions as you go. We actually left material on the floor that we couldn't ship for a variety of different reasons. No Achilles heel or whatever, just a couple of little packaging issues, just miscellaneous stuff. The 53 could have quite easily have been 60, and would have been at the bottom of that range. No major issues. It's just a matter of the team just working out all the bugs.

Speaker #3: As you go, we actually left material on the floor that we couldn't ship for a variety of different reasons. No Achilles' heel or whatever, but just a couple of little packaging issues.

Speaker #3: Just miscellaneous stuff. So the 53 could have quite easily been 60, and would have been at the bottom of that range. But no major issues.

Speaker #3: It's just a matter of the team working out all the bugs.

Speaker #7: Okay. And then, kind of a guidepost or outlook for the third quarter?

Samuel McKinney: Okay, kind of guidepost or outlook for Q3?

Speaker #3: Significantly improved.

Mark Millett: Significantly improved.

Speaker #7: Okay. Appreciate it. Thanks, guys.

Samuel McKinney: Okay. Appreciate it. Thanks, guys.

Speaker #4: Thank you, Sam.

Theresa Wagler: Thank you, Sam.

Speaker #1: Thank you. Your next question is coming from Richard Garchterena from Barclays. Your line is live.

Operator: Thank you. Your next question's coming from Richard Garchitorena from Barclays. Your line is live.

Speaker #5: Great, thank you, and thanks for taking my question. Just first off, I was wondering—you mentioned that you had constructive discussions on pricing with your customers on contracts. I’m wondering if you can give us any color on that.

Richard Garchitorena: Great, thank you, and thanks for taking my question.

Barry Schneider: You're welcome.

Richard Garchitorena: Just first off, just wondering, you mentioned that you had constructive discussions on pricing with your customers on contracts. Wondering if you could give us any color on that. How should we think about that cadence of when you'll realize those, given the lags in contracts? Is that going to be more of a 2027 type thing that we should see?

Speaker #5: And how should we think about that cadence of when you’ll realize those, given the lags in contracts? Is that going to be more of a 2027-type thing that we should see?

Speaker #4: So that was specific, just so there's clarity. It wasn't really a contract, per se. It was specific to the steel fabrication business and their quoting, and what's going into the backlog.

Theresa Wagler: That was specific, just so there's clarity. It wasn't really contracts per se. It was specific to steel fabrication business and their quoting and what's going into the backlog. I think that, and Barry, you can correct me, but I would expect to start to see some improvement in Q4 and certainly into 2027. Those projects are further out than near term. Is that fair, Barry?

Speaker #4: And so I think that—and Barry, you can correct me—but I would expect to start to see some improvement in the fourth quarter, and certainly into 2027.

Speaker #4: But those projects are further out than near term. Is that fair, Barry?

Speaker #5: Yep, that's fair—for the fabrication side.

Barry Schneider: Yep, that's fair for the fabrication side.

Speaker #4: Yeah.

Speaker #5: Okay. Thanks for that clarification. And then, just to look at the bigger picture—you mentioned that scrap prices have been relatively stable, and you expect them to remain that way for the rest of the year.

Theresa Wagler: Yeah.

Richard Garchitorena: Okay. Thanks for that clarification. Then just a bigger picture. You mentioned that scrap prices have been relatively stable, and you expect them to remain that way for the rest of the year, despite what we're seeing in terms of the move in HRC prices. Just wondering what's driving that in terms of, historically, we've seen much more correlation in terms of scrap prices with the move in steel sheet prices. Is there anything in the industry that's sort of keeping those scrap prices flattish?

Speaker #5: Despite what we're seeing in terms of the move in HRC prices, so just wondering what's driving that in terms of historically we've seen much more correlation in terms of scrap prices with the move in STEEL sheet prices.

Speaker #5: So, is there anything in the industry that is keeping those scrap prices flattish?

Speaker #2: Well, I think one of the things that was a good victory for the mini mill industry was the Section 301 against Brazil for pig iron imports.

Barry Schneider: Well, I think one of the things that was a good victory for the mini mill industry was the Section 301 against Brazil for pig iron imports. The 301 recommendations now exclude pig iron shipments from Brazil into the United States. The pig iron market in the United States is not a merchant market. The only producers of pig iron have very limited ability to sell pig iron directly to the rest of the trade in America. Excluding Brazil allows that material to flow in here, and although pig iron is a different resource for us, its cleanliness, it's also introducing energy into our mixes. It does help in relation to the pricing of scrap, particularly the prime quality scraps.

Speaker #2: The 301 recommendations now exclude pig iron shipments from Brazil into the United States. The pig iron market in the United States is not a merchant market.

Speaker #2: The only producers of pig iron have very limited ability to sell pig iron directly to the rest of the trade in America. So, excluding Brazil allows that material to flow in here.

Speaker #2: And although pig iron is a different resource for us, its cleanliness—it's also introducing energy into our mixes. It does help in relation to the pricing of scrap, particularly the prime quality scraps.

Speaker #2: The pig iron trade has been very much disrupted internationally since the Russian invasion of Ukraine, which continues to put pressure on pig iron supply chains around the world.

Barry Schneider: The pig iron trade has been very much disrupted internationally since the Russian invasion of Ukraine, which continues to put pressure on pig iron supply chains around the world. This is a good victory for the mini mill part of our industry, flat-rolled, that uses pig iron, and I think that will have some impact on spreads of hot-rolled scrap.

Speaker #2: So, this is a good victory for the mini mill part of our industry—flat rolled that uses pig iron. And I think that will have some impact on the spreads of hot-rolled scrap.

Speaker #3: And perhaps, just to add to that, you have an environment today where there is ample supply of scrap in the country, even with the additional capacity that's come online over the last few years.

Mark Millett: Perhaps just to add to that, you got an environment today where there's ample supply of scrap in the country, even with the additional capacity that's come online over the last few years. You got low imports, low exports today, relatively so. That's holding scrap in country. Perhaps not having a massive impact now, but longer term, the good news, with the new capacity coming online, Nippon, the Hyundai POSCO plant, they're all adding DRI capacity, which helps the iron unit sort of balance in the country. We don't see any major change in scrap, to be honest.

Speaker #3: You've got low imports, low exports today—relatively so. So that's holding scrap in the country, and perhaps not having a massive impact now. But longer term, the good news is with the new capacity coming online—Nippon or the Hyundai possible plant—they're all adding DRI capacity, which helps the iron unit sort of balance in the country.

Speaker #3: So, we don't see any major change in scrap, to be honest.

Speaker #5: Great. Thank you.

Richard Garchitorena: Great. Thank you.

Speaker #1: Thank you. Your next question is coming from Bill Peterson from JP Morgan. Your line is live.

Operator: Thank you. Your next question's coming from Bill Peterson from J.P. Morgan. Your line is live.

Operator: Thank you. Your next question's coming from Bill Peterson from JPMorgan. Your line is live.

Speaker #6: Yeah. Hi. Good morning. Thanks for taking the questions, and nice job on the quarterly execution.

Bill Peterson: Yeah. Hi, good morning. Thanks for taking the questions and nice job on the quarterly execution.

Speaker #3: Thank you.

Barry Schneider: Thank you.

Speaker #6: On the first starting off with STEEL, so I guess across the product portfolio, have you seen lead times come in at all or start to decline or if not, which products amongst flat rolled or long products are most extended relative to normalized levels?

Bill Peterson: First starting off with steel. I guess across the product portfolio, have you seen lead times come in at all or start to decline? Or if not, which products amongst flat-rolled or long products are most extended relative to normalized levels? I guess second part to that is with extended lead times and record pricing in structural, what opportunities do you have there to drive increased output, whether it's higher utilization, increased investments, or something else?

Speaker #6: And I guess the second part or two of that is, with extended lead times and record pricing—structurally, what opportunities do you have there to drive increased output, whether it's higher utilization, increased investments, or something else?

Speaker #2: With long products, our Structural Rail division is really doing an incredible job of driving more and more productivity across the board. They are very good at optimizing their mixes.

Barry Schneider: With long products, our structural rail division is really doing incredible jobs of getting more and more productivity across the board. They are very good at optimizing their mixes so that when an opportunity like this where the order book is really generous, they run more efficiently. They're really good at scheduling how they put together runs, both in the melt shop casting as well as in the rolling. We've seen casting records, melting records out of Columbia City three of the last four quarters, which good decision-making in tough times allows them to really run hard right now. That energy also translates into the merchants, where we're able to really put together effective campaigns and rolling schedules. On the flat product side, again, I think the utilization that we operate at is usually at this very high level.

Speaker #2: So that when an opportunity like this, with the order book being really generous, comes up, they run more efficiently. So they're really good at scheduling how they put together runs, both in the mill shop casting as well as in the rolling.

Speaker #2: We've seen casting records and melting records out of Columbia City in three of the last four quarters, which, with good decision making in tough times, allows them to really run hard right now.

Speaker #2: That energy also translates into the merchants, where we're able to really put together effective campaigns and rolling schedules. On the flat products side, again, I think the utilization that we operate at is usually at this very high level.

Speaker #2: So it does allow us a little bit of enhanced efficiency. When we know what the orders are, we can be a little more effective in the month, instead of looking week to week.

Barry Schneider: It does allow us a little bit of enhanced efficiencies when we know what the orders are, so we could be a little bit more effective in the month instead of looking week to week. We continue to see our lead times right where we want them. We don't want to be late. We want to make sure customers get what they want when they need it. I really have to reach out to Pittsboro. SBQ has been a tough market the last few years, and with the on-shoring and re-shoring efforts, that team continues to get more and more productive, all the while maintaining a 95% or better on-time delivery. That's going to customers who need that steel to make products for OEMs and manufacturers. Across the board, our steel units are able to operate very efficiently when we see order books like this.

Speaker #2: But we continue to see our lead times right where we want them. We don't want to make we don't want to be late. We want to make sure customers get what they want when they need it.

Speaker #2: And I really have to reach out to Pittsboro. SBQ has been a tough market the last few years, and with the onshoring and reshoring efforts, that team continues to get more and more productive.

Speaker #2: All the while, maintaining a 95% or better on-time delivery. And that's going to customers who need that steel to make products for OEMs and manufacturers.

Speaker #2: So, across the board, our steel units are able to operate very efficiently when we see order books like this. But it doesn't change our strategy for booking.

Barry Schneider: It doesn't change our strategy for booking, our strategy for relationships. It's all just really a good time to optimize those things on the steel side.

Speaker #2: Our strategy for relationships—it's all just really a good time to optimize those things on the steel side.

Speaker #6: Thanks for that, Barry. And then I guess, pivoting to ADI—a lot of questions on utilization and a lot of other things. But I just want to make sure: I think you've talked about reaching 90% utilization by the end of '26.

Bill Peterson: Yeah. Thanks for that, Barry. I guess pivoting to ADI, a lot of questions on utilization and a lot of other things, but just want to make sure. I think you talked about reaching 90% utilization by end of 2026. Want to see if that's still the case or if that's an exit rate. Based on your commentary on mix, scrap content, as well as the steep ramp in the H2, how should we think about the cadence of the earnings through the balance of the year? Should we expect Q3 to pivot to profitability?

Speaker #6: I want to see if that's still the case, or if that's an exit rate. And based on your commentary on mix, scrap content, as well as the steep ramp in the second half, how should we think about the cadence of the earnings through the balance of the year?

Speaker #6: Should we expect the third quarter to pivot to profitability?

Speaker #4: So, from the perspective of exiting the year at at least a 90% utilization rate, absolutely. We feel even more confident about that given the performance of the team in the second quarter and more recently.

Theresa Wagler: From the perspective of exiting the year at least 90% utilization rate, absolutely. We feel even more confident about that given the performance of the team in Q2 and more recently. Especially with the onset of bringing the third cold mill online here in August. That will be a key to that. As you think about profitability in H2, yes, we've been approaching EBITDA positive to EBITDA positive, but we would expect to be earnings positive in H2 as well.

Speaker #4: And especially with the onset of bringing the third cold mill online here in August, that will be key to that. As you think about profitability in the second half of the year, yes, we’ve been kind of approaching EBITDA positive to EBITDA positive, but we would expect to be earnings positive in the second half of the year as well.

Speaker #6: Thanks, Theresa.

Mark Millett: Thanks, Theresa.

Bill Peterson: Thanks, Theresa.

Speaker #1: Thank you. Your next question is coming from John Tomasos from John Tomasos Very Independent Research. Your line is live.

Operator: Thank you. Your next question is coming from John Tumazos from John Tumazos Very Independent Research. Your line is live.

Speaker #6: Thank you. Looking forward a number of years, where do you think we go next with steel processing, buying two and a half to three million tons more steel than you make?

John Tumazos: Thank you.

John Tumazos: John.

John Tumazos: Looking forward a number of years, where do you think we go next? With steel processing buying two and a half, 3 million tons more steel than you make, it could be possible to build a sheet mill, another one to make that steel yourselves. Is there enough scrap aluminum to build a second 650,000-ton Columbus rolling complex? Is there something else on the horizon?

Speaker #6: Would it be possible to build a sheet mill, or another facility to make that steel yourselves? Or is there enough scrap aluminum to build a second 650,000-ton Columbus rolling complex?

Speaker #6: Or is there something else on the horizon?

Speaker #3: Well, as always, John, phenomenal questions—or thoughts. The hot band substrate requirement has grown over the years and likely will grow a little more. Obviously, it is a potential growth avenue.

Mark Millett: Well, as always, John, phenomenal questions or thoughts. The hot band substrate requirement that has grown over the years and likely will grow a little more, obviously, is a potential growth avenue. I would suggest, given the dynamics within the supply-demand balance out there, it wouldn't be a typical mill if we were to do it, but it wouldn't be a mill that we're going to build any time soon. On the steel side, I think Barry and the team have got a pipeline of some pretty damn neat value-add niche opportunities. As you've always known, we don't strive to build and grow just to be big. We want to maintain that high margin, niche product, supply chain type strategy. We do have steel projects along those lines. Aluminum obviously is also a great potential for growth.

Speaker #3: But I would suggest, given the dynamics within the supply-demand balance out there, it wouldn't be a typical mill if we were to do it.

Speaker #3: But it wouldn't be a mill that we're going to build anytime soon. On the steel side, I think Barry and the team have got a pipeline of some pretty damn neat value-add niche opportunities.

Speaker #3: And as you've always known, we tend to—we don't strive to build and grow just to be big. We want to maintain that high-margin, niche product, supply chain-type strategy.

Speaker #3: So, we do have steel projects along those lines. And aluminum, obviously, also has great potential for growth. It doesn't necessarily—or our past history isn't to go and build a big mill and then just copy that same thing.

Mark Millett: Our past history isn't to go and build a big mill and then just copy that same thing. We've only been in the industry, obviously, for, whatever it is now, two years. We again see smaller value add niche opportunities that would have great return on invested capital type profiles. A big steel mill anytime soon? No. Massive, 650,000 tons aluminum mill, probably not here in the very, very near future. There's plenty of opportunities for us to grow.

Speaker #3: We've only been in the industry obviously for whatever it is now, two years. But we have gained see smaller value add niche opportunities that would have great return on invested capital type profiles.

Speaker #3: So, a big steel mill anytime soon? No. Massive 650,000-ton aluminum mill? Probably not here in the very, very near future. But there's plenty of opportunities for us to grow.

Speaker #6: Thank you.

John Tumazos: Thank you.

Speaker #1: Thank you. And once again, everyone, if you have any questions or comments, please press star then one on your phone. Your next question is coming from Albert Rolini from Jefferies.

Operator: Thank you. Once again, everyone, if you have any questions or comments, please press star then one on your phone. Your next question is coming from Albert Relini from Jefferies. Your line is live.

Speaker #1: Your line is live.

Speaker #5: Hey, good morning, all. Just on capital allocation, given the earnings trajectory, the continued focus on the execution of the ramp of ADI, and some of the working capital and 2027 capex commentary.

Albert Relini: Hey, good morning, all. Just on capital allocation, given the earning trajectory, the continued focus on the execution of the ramp of ADI and some of the working capital and 2027 CapEx commentary, how should we be thinking about the trajectory of repurchases in the coming quarters? Is it reasonable to assume maybe what we saw during the 2023 quarters, or is maybe a similar kind of increase from Q1 to Q2 more, I guess, reasonable if pricing holds up in H2? Thank you.

Albert Realini: Hey, good morning, all. Just on capital allocation, given the earning trajectory, the continued focus on the execution of the ramp of ADI and some of the working capital and 2027 CapEx commentary, how should we be thinking about the trajectory of repurchases in the coming quarters? Is it reasonable to assume maybe what we saw during the 2023 quarters, or is maybe a similar kind of increase from Q1 to Q2 more, I guess, reasonable if pricing holds up in H2? Thank you.

Speaker #5: I mean, how should we be thinking about the trajectory of repurchases in the coming quarters? I mean, is it reasonable to assume maybe what we saw during the '23 quarters, or is maybe a similar kind of increase from the first to the second quarter more, I guess, reasonable if pricing holds up in the second half?

Speaker #5: Thank you.

Speaker #4: The expectation would be, as we've mentioned, we want to take the opportunity, as we have access to cash flow, to lean in on the share repurchases.

Theresa Wagler: The expectation would be, as we have mentioned, we want to take the opportunity as we have excess cash flow to lean in on the share repurchases. We think that the current pricing is still incredibly attractive to do that. In Q2, we are at $200 million. We paused in Q1, as we mentioned, to allow for the ramp in working capital as aluminum ramps up. I don't know that we have specific plans for what H2 of the year looks like. I would say it is going to trend more toward what you saw in Q2 and perhaps last year. That will depend on the cash flow as we progress through H2.

Speaker #4: We think that the current pricing is still incredibly attractive to do that. So in the second quarter, we are at $200 million. We paused in the first quarter, as we mentioned, to allow for the ramp and working capital as aluminum ramps up.

Speaker #4: I don't know that we have specific plans for what the second half of the year looks like. I would say it's going to trend more toward what you saw in the second quarter and perhaps last year, but that will depend on cash flow as we progress through the second half.

Speaker #5: Thank you.

Albert Relini: Thank you.

Albert Realini: Thank you.

Speaker #1: Thank you. That concludes our question and answer session. I'd like to turn the call back to Mr. Millett for any closing remarks.

Operator: Thank you. That concludes our question and answer session. I'd like to turn the call back to Mr. Millett for any closing remarks.

Speaker #3: Super. Thank you, Matthew. Appreciate everyone's interest and support today. And just would like to, as always, thank our customer base. We can't do what we do without you.

Mark Millett: Super. Thank you, Matthew. Appreciate everyone's interest and support today. Just would like to, as always, thank our customer base. We can't do what we do without you, and particularly on the aluminum side, your patience with us and your support has been extraordinary. Service providers, phenomenal. We can't do without you guys either, guys and girls. Employees, my hat's off to you. I said it at the very beginning, I'm honored to be part of the team. You do a phenomenal job. I just want to really stress that we need to continue to work smarter, harder, and be committed to getting to that zero-incident safety environment. To shareholders and investors, we treat your money as it's our own. We hopefully have demonstrated a good responsibility there, and we're going to continue to do that in the future.

Speaker #3: And particularly on the aluminum side, your patience with us and your support has been extraordinary. Service providers, phenomenal. We can't do without you guys either.

Speaker #3: Guys and girls, employees—my hat's off to you. I said it at the very beginning: I'm honored to be part of the team. You do a phenomenal job.

Speaker #3: I just want to really, really, really stress that we need to continue to work smarter and harder, and be committed to getting to that zero-incident safety environment.

Speaker #3: And to shareholders and investors, we treat your money as if it's our own. And we've hopefully demonstrated good responsibility there. We're going to continue to do that in the future.

Mark Millett: I don't think there's ever been a time where I am more excited for the team. Given the step function increase in cash generation that we're going to see from these new assets, with the growth opportunities that the team has identified going forward, it's nothing but phenomenal what they're going to achieve. Thank you, everyone.

Speaker #3: I don't think there's ever been a time when I was more excited for the team. Given the step-function increase in cash generation that we're going to see from these new assets, along with the growth opportunities the team has identified going forward, it's nothing but phenomenal what they're going to achieve.

Speaker #3: So thank you, thank you, thank you, everyone.

Operator: Thank you. Once again, ladies and gentlemen, that concludes today's call. Thank you for your participation, and have a great and safe day.

Q2 2026 Steel Dynamics Inc Earnings Call

Request DemoDemo

Steel Dynamics

Earnings