Q4 2025 3D Systems Corp Earnings Call

March 9, 2026

Operator: Greetings, and welcome to the 3D Systems Q4 and full year 2025 Earnings Conference Call. At this time, all participants are in a listen-only mode. As a reminder, this conference is being recorded. If anyone should require operator assistance, please press star zero on your telephone keypad. A question-and-answer session will follow the formal presentation, and you may press star one to be placed into question queue at any time. It's now my pleasure to turn the call over to Monica Gould, Vice President, Investor Relations. Please go ahead, Monica.

Speaker #2: As a reminder, this conference is being recorded. If anyone should require operator assistance, please press *0 on your telephone keypad. A question-and-answer session will follow the formal presentation, and you may press *1 to be placed into the question queue at any time.

Speaker #2: It's now my pleasure to turn the call over to Monica Gould, Vice President, Investor Relations, please go ahead, Monica. Hello, and welcome to 3D SYSTEMS fourth quarter and full year 2025 earnings conference call.

Monica Gould: Hello, Welcome to 3D Systems Q4 and full year 2025 Earnings Conference Call. With me on today's call are Dr. Jeffrey Graves, President and CEO, and Phyllis Nordstrom, Interim CFO. The webcast portion of this call contains a slide presentation that we will refer to during the call. Those following along on the phone who wish to access the slide portion of this presentation may do so on the investor relations section of our website. The following discussion and responses to your questions reflect management's views as of today only and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release, and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.

Speaker #2: With me on today's call are Dr. Jeffrey Graves, President and CEO, and Phyllis Nordstrom, Interim CFO. The webcast portion of this call contains a slide presentation that we will refer to during the call.

Speaker #2: Those following along on the phone who wish to access the slide portion of this presentation may do so on the Investor Relations section of our website.

Monica Gould: The following discussion and responses to your questions reflect management's views as of today only and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release, and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.

Speaker #2: The following discussion and responses to your questions reflect management's views as of today only and will include forward-looking statements. As described on this slide, actual results may differ materially.

Speaker #2: Additional information about factors that could potentially impact our financial results is included in our latest press release and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.

Speaker #2: During this call, we will discuss certain non-GAAP financial measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable GAAP measures.

Monica Gould: During this call, we will discuss certain non-GAAP financial measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable GAAP measures. Unless otherwise stated, all comparisons in this call will be against our results for the comparable periods of 2024. With that, I'll turn the call over to our CEO, Jeff Graves, for opening remarks.

Speaker #2: Finally, unless otherwise stated, all comparisons in this call will be against our results for the comparable periods of 2024. With that, I'll turn the call over to our CEO, Jeff Graves, for opening remarks.

Speaker #2: Thank you, Monica, and good morning, everyone. Having executed well on both our 2025 savings initiatives and new product launches, I'm pleased to report a stronger finish to 2025, with momentum continuing to build as we move into '26.

Jeffrey Graves: Thank you, Monica, good morning, everyone. Having executed well on both our 2025 savings initiatives and new product launches, I'm pleased to report a stronger finish to 2025 with momentum continuing to build as we move into 2026. I'll start today by reviewing a few highlights from our Q4 and provide some comments on overall market conditions as we enter the new year. I'll focus very specifically on our strategy and key growth initiatives, the early stages of which you can see reflected even now in our operating trends. After this, I'll turn things over to our Interim CFO, Phyllis Nordstrom, to provide details on the quarter's financials. When Phyllis concludes, we'll open the call for Q&A. Let's turn to slide 5.

Speaker #2: I'll start today by reviewing a few highlights from our fourth quarter and provide some comments on overall market conditions as we enter the new year.

Speaker #2: I'll then focus very specifically on our strategy and key growth initiatives, the early stages of which you can see reflected even now in our operating trends.

Speaker #2: After this, I'll turn things over to our interim CFO, Phyllis Nordstrom, to provide details on the quarter's financials. When Phyllis concludes, we'll open the call for Q&A.

Speaker #2: So let's turn to slide five. Despite global economic and geopolitical challenges that have translated to restraint in CAPEX spending by our customers for some time now, we've been able to balance the need for significant cost reduction with the requirement for continuity in key R&D programs that are essential to long-term growth and value creation for our customers and shareholders alike.

Jeffrey Graves: Despite global economic and geopolitical challenges that have translated to restraint in CapEx spending by our customers for some time now, we've been able to balance the need for significant cost reduction with the requirement for continuity in key R&D programs that are essential to long-term growth and value creation for our customers and shareholders alike. I'm extremely proud of our employees and their ability to execute this balance day-to-day over the last 2 years, I'm pleased to see the results of their hard work and creativity now entering the market. These efforts are allowing us to refresh our installed base of printers, which is the largest and most diverse in the world, and launch exciting new products and applications that provide extraordinary value to our customers.

Speaker #2: I'm extremely proud of our employees and their ability to execute this balanced day-to-day over the last two years. And I'm pleased to see the results of their hard work and creativity now entering the market.

Speaker #2: These efforts are allowing us to refresh our installed base of printers, which is the largest and most diverse in the world, and launch exciting new products and applications that provide extraordinary value to our customers.

Speaker #2: Importantly, during a period in our industry where cost savings are imperative, we've reduced overall operating costs while selectively doubling down on those industries where additive manufacturing is poised to reshape the market.

Jeffrey Graves: Importantly, during a period in our industry where cost savings are imperative, we've reduced overall operating costs while selectively doubling down on those industries where additive manufacturing is poised to reshape the market and where we have a unique competitive advantage. I'll provide specific details on these markets in a few moments, and Phyllis will summarize the impact of both our cost actions and growth initiatives on our financial performance and trends. Slide six. I'll start by reviewing our highlights from the Q4. Consistent with past years, we had seasonally strong Q4 in our historic markets. What was unusual this year was the additional top-line benefits specifically related to our three key growth initiatives. Given their importance, I'll cover these key growth areas in some detail in a few moments. Overall, revenue increased 16% sequentially above our guidance of 8% to 10% growth.

Speaker #2: And where we have a unique competitive advantage. I'll provide specific details on these markets in a few moments, and Phyllis will summarize the impact of both our cost actions and growth initiatives on our financial performance and trends.

Jeffrey Graves: Slide six. I'll start by reviewing our highlights from the Q4. Consistent with past years, we had seasonally strong Q4 in our historic markets. What was unusual this year was the additional top-line benefits specifically related to our three key growth initiatives. Given their importance, I'll cover these key growth areas in some detail in a few moments. Overall, revenue increased 16% sequentially above our guidance of 8% to 10% growth.

Speaker #2: Slide six. I'll start by reviewing our highlights from the fourth quarter. Consistent with past years, we had a seasonally strong Q4 in our historic markets.

Speaker #2: But what was unusual this year was the additional top-line benefits specifically related to our three key growth initiatives. Given their importance, I'll cover these key growth areas in some detail in a few moments.

Speaker #2: Overall revenue increased 16% sequentially, above our guidance of 8% to 10% growth. From a product standpoint, these results reflect the strengthening of both our printer and material sales, driven by key new product launches over the last year in both our industrial and healthcare businesses.

Jeffrey Graves: From a product standpoint, these results reflect the strengthening of both our printer and material sales, driven by key new product launches over the last year in both our industrial and healthcare businesses. Now, let me give you a little more insight into what drove this strength, beginning with changes in our historic markets. Within our Industrial Solutions business, we saw sequential double-digit growth in several of our more traditional consumer-oriented end markets, including both automotive and jewelry manufacturing. In automotive, this growth reflected the impact of our newest SLA printing platform, specifically our dual laser SLA 750 that we launched just over a year ago, which is the most precise and productive industrial-scale SLA printer in the market today. It's being adopted preferentially in both motorsports and in consumer automotive OEMs, delivering significant improvements in productivity in their development labs.

Speaker #2: Now, let me give you a little more insight into what drove this strength, beginning with changes in our historic markets. Within our Industrial Solutions business, we saw sequential, double-digit growth in several of our more traditional consumer-oriented markets, including both automotive and jewelry manufacturing.

Speaker #2: In automotive, this growth reflected the impact of our newest SLA printing platform, specifically our dual-laser SLA 750 that we launched just over a year ago, which is the most precise and productive industrial-scale SLA printer in the market today.

Jeffrey Graves: In automotive, this growth reflected the impact of our newest SLA printing platform, specifically our dual laser SLA 750 that we launched just over a year ago, which is the most precise and productive industrial-scale SLA printer in the market today. It's being adopted preferentially in both motorsports and in consumer automotive OEMs, delivering significant improvements in productivity in their development labs.

Speaker #2: It's being adopted preferentially in both motorsports and in consumer automotive OEMs, delivering significant improvements in productivity in their development labs. The strong sequential growth in jewelry was driven by the recent launch of our new wax printer, the MJP 300W+.

Jeffrey Graves: The strong sequential growth in jewelry was driven by the recent launch of our new wax printer, the MJP 300W Plus, which delivers significantly improved accuracy and surface finish in wax patterns that are central to the casting process. These factors are very important to manufacturers as they provide dramatic reductions in gold loss during final polishing of the product, particularly at a time when gold prices are at record levels. An interesting note with regard to gold jewelry is the rate at which the entire industry is now adopting additive manufacturing, which allows for virtually limitless customization of designs without increasing the cost of the product, or in some cases even reducing it.

Speaker #2: This delivers significantly improved accuracy and surface finish in wax patterns that are central to the casting process. These factors are very important to manufacturers, as they provide dramatic reductions in gold loss during final polishing of the product.

Speaker #2: Particularly at a time when gold prices are at record levels. An interesting note with regard to gold jewelry is the rate at which the entire industry is now adopting additive manufacturing.

Speaker #2: This allows for virtually limitless customization of designs without increasing the cost of the product—or in some cases, even reducing it. Anticipating these inflection points in an industry is essential in order to capitalize on the rapid CAPEX investments that follow.

Jeffrey Graves: Anticipating these inflection points in an industry is essential in order to capitalize on the rapid CapEx investments that follow, disproportionately benefiting those companies that are well-positioned to meet this rise in demand from its outset. With our industry-leading application engineering team, we're experts at doing just this. Within our Healthcare Solutions business, we saw sequential growth in dental material sales driven largely by stabilization of demand for aligners. We are also beginning to see sales from the commercial release of our new NextDent jetted denture platform, which is being very well-received in the market, and I'll offer some more comments in a moment. Looking beyond these trends in our traditional markets, I'd like to now spend a few minutes on what I believe are the three most exciting growth markets that are opening before us.

Speaker #2: This proportionally benefits those companies that are well positioned to meet this rise in demand from its outset. With our industry-leading application engineering team, we're experts at doing just this.

Speaker #2: Within our healthcare solutions business, we saw sequential growth in dental material sales driven largely by stabilization of demand for aligners. These are also beginning to see we're also beginning to see sales from the commercial release of our new next-gen jetted denture platform, which is being very well received in the market and I'll offer some more comments in a moment.

Speaker #2: Looking beyond these trends in our traditional markets, I'd like to now spend a few minutes on what I believe are the three most exciting growth markets that are opening before us.

Speaker #2: These are aerospace and defense, personalized health services, and dental. Applications within these markets greatly benefit from additive manufacturing in that their performance is greatly enhanced by mass customization of design.

Jeffrey Graves: These are aerospace and defense, personalized health services, and dental. Applications within these markets greatly benefit from additive manufacturing in that their performance is greatly enhanced by mass customization of design. With the latest evolution of our printing technologies, the manufacturing cost has declined to a point to support rapid adoption. Turning to slide 7. One of our key growth markets is aerospace and defense, which has become the largest and one of the fastest-growing segments within our Industrial Solutions business. On a full year basis, our aerospace and defense revenue, which includes production printing systems, consumable materials, and custom metal parts, achieved 16% growth, and we continue to expect over 20% growth for 2026. What technologies are required to deliver sustainable revenue growth in aerospace and defense?

Speaker #2: And with the latest evolution of our printing technologies, the manufacturing cost has declined to a point to support rapid adoption. Turning then to slide seven.

Speaker #2: One of our key growth markets is aerospace and defense, which has become the largest and one of the fastest-growing segments within our Industrial Solutions business.

Speaker #2: On a full-year basis, our aerospace and defense revenue, which includes production printing systems, consumable materials, and custom metal parts, achieves 16% growth, and we continue to expect over 20% growth for 2026.

Speaker #2: So, what technologies are required to deliver sustainable revenue growth in aerospace and defense? Well, the fastest-growing and highest-value portion of this market, which is where we're focused, comes from the manufacture of metal parts.

Jeffrey Graves: Well, the fastest-growing and highest-value portion of this market, which is where we're focused, comes from the manufacture of metal parts. These parts can be made in one of two ways, either by metal casting or by Direct Metal Printing. They are playing a vital role in the growth we're now experiencing in this market. In the casting process, our market-leading photopolymer printing technology is used to manufacture complex cores and shells for high-performance cast metal components. Our Direct Metal Printing systems, which are known for outstanding environmental control and precision, are used to manufacture high-value metal parts directly from powder using materials such as titanium and nickel-based superalloys. Indeed, an increasing range of advanced aerospace and defense applications can only be made by Direct Metal Printing due to the complexity of the designs needed for today's applications.

Speaker #2: These parts can be made in one of two ways, either by metal casting or by direct metal printing. We've invested heavily in both of these technologies, and they're playing a vital role in the growth we're now experiencing in this market.

Speaker #2: In the casting process, our market-leading photopolymer printing technology is used to manufacture complex cores and shells for high-performance cast metal components. While our direct metal printing systems, which are known for outstanding environmental control and precision, are used to manufacture high-value metal parts directly from powder, using materials such as titanium and nickel-based superalloys.

Speaker #2: Indeed, an increasing range of advanced aerospace and defense applications can only be made by direct metal printing, due to the complexity of the designs needed for today's applications.

Speaker #2: This is why we have maintained our R&D investments in this area even through these challenging periods. Without this suite of technologies, a company simply cannot participate in the high-value end of the market.

Jeffrey Graves: This is why we have maintained our R&D investments in this area even through these challenging periods. Without this suite of technologies, a company simply cannot participate in the high-value end of the market. From a customer standpoint in aerospace and defense, we define three phases of growth. First is the development of a specific process to manufacture a customer's key components. Second is an offer of metal part production at a low to intermediate volume that allows the customer to directly scale from the initial test and manufacture the system to full-scale production. The third, the sale of the complete printing systems that allow a customer to further scale manufacturing to high volumes.

Speaker #2: From a customer standpoint, in aerospace and defense, we define three phases of growth. First is the development of a specific process to manufacture a customer's key components.

Speaker #2: Second is an offer of metal part production at low to intermediate volume that allows the customer to directly scale from the initial test and manufacture of the system to full-scale production.

Speaker #2: And then the third, the sale of the complete printing systems that allow a customer to further scale manufacturing to high volumes. This approach to aerospace and defense, which has been under intense development for the last three years, is proving to be very attractive to our customers, and is a key in sustaining the growth we're now enjoying.

Jeffrey Graves: This approach to aerospace and defense, which has been under intense development for the last three years, is proving to be very attractive to our customers and is a key in sustaining the growth we're now enjoying. From a geographic standpoint, we're taking this approach through our operations in Littleton, Colorado, for the US market, in Leuven, Belgium, for our European market, and through our Saudi Arabian joint venture in NAMI for our growing demand in the Middle East. Each of these has very similar capabilities to serve their regional customer base. As a final comment, this three-phase customer approach is the same one we've used very successfully in our healthcare business for many years, which has given us the operating model and the quality infrastructure to make it work at scale in this adjacent market.

Speaker #2: From a geographic standpoint, we're taking this approach through our operations in Littleton, Colorado, for the US market. In Leuven, Belgium, for our European market.

Speaker #2: And through our Saudi Arabian joint venture, NAMI, for our growing demand in the Middle East. Each of these has very similar capabilities to serve their regional customer base.

Speaker #2: And as a final comment, this three-phase customer approach is the same one we've used very successfully in our healthcare business for many years, which has given us the operating model and the quality infrastructure to make it work at scale in this adjacent market.

Speaker #2: So because aerospace and defense is a very broad market, many folks are asking, what are the key focal areas for us? The ones we're gaining the most traction, and look to be the most sustainable in the years ahead, include satellites, naval and marine applications, aircraft and rockets, and flight systems.

Jeffrey Graves: Because aerospace and defense is a very broad market, many folks are asking, what are the key focal areas for us? The ones we're gaining the most traction and look to be the most sustainable in the years ahead include satellites, naval and marine applications, aircraft and rockets, and flight systems. More specifically, in satellite systems, our technology is being used to provide antenna arrays, waveguides, and filters, as well as numerous lightweight structural brackets. This is a rapidly expanding market as satellite communication is proving essential in many areas of the world. For naval applications, submarines are often leading the way as our printing technology provides high reliability hydraulic fittings, piping, and valves, as well as advanced turbomachinery and pumps, all manufactured from very special materials that are resistant to the extreme environments that these boats encounter.

Speaker #2: More specifically, in satellite systems, our technology is being used to provide antenna arrays, waveguides, and filters, as well as numerous lightweight structural brackets.

Speaker #2: This is a rapidly expanding market, as satellite communication is proving essential in many areas of the world. For naval applications, submarines are often leading the way, as our printing technology provides high reliability, hydraulic fittings, piping and valves, as well as advanced turbomachinery and pumps.

Speaker #2: All manufactured from very special materials that are resistant to the extreme environments that these boats encounter. For aircraft and drone applications, our printing systems are most often used for critical aerodynamic parts such as winglets, fairings, and ducts.

Jeffrey Graves: For aircraft and drone applications, our printing systems are most often used for critical aerodynamic parts such as winglets, fairings, and ducts, structural elements and airframes, rotor blades and stabilizers, and aero-propulsion components, including complex turbine components. In addition to the printing system themselves, recurring revenue in aerospace and defense comes from material pull-through, which in this case includes both polymer resins used in casting workflows, as well as finished parts consumed by customers at the early stages of full-scale manufacturing. Casting processes in aerospace and defense have been critical for decades, but they've assumed a new and even higher level of importance in the most advanced rocket and aero-propulsion systems being introduced today. Interestingly, this acceleration has been driven not only by enhanced component performance requirements, but also in simplifying complex assemblies to reduce part count and therefore the cost of new propulsion systems.

Speaker #2: Structural elements and airframes, rotor blades and stabilizers, and air propulsion components, including complex turbine components. In addition to the printing systems themselves, recurring revenue in aerospace and defense comes from material pull-through, which in this case includes both polymer resins used in casting workflows, as well as finished parts consumed by customers at the early stages of full-scale manufacturing.

Speaker #2: Casting processes in aerospace and defense have been critical for decades. But they've assumed a new and even higher level of importance in the most advanced rocket and air propulsion systems being introduced today.

Jeffrey Graves: Casting processes in aerospace and defense have been critical for decades, but they've assumed a new and even higher level of importance in the most advanced rocket and aero-propulsion systems being introduced today. Interestingly, this acceleration has been driven not only by enhanced component performance requirements, but also in simplifying complex assemblies to reduce part count and therefore the cost of new propulsion systems.

Speaker #2: Interestingly, this acceleration has been driven not only by enhanced component performance requirements, but also by simplifying complex assemblies to reduce part count, and therefore, the cost of new propulsion systems.

Speaker #2: As a leader in this field, we've benefited from this expansion in 2025 and expect this momentum to continue, particularly as the number of rocket launches increases substantially in the years ahead.

Jeffrey Graves: As a leader in this field, we've benefited from this expansion in 2025 and expect this momentum to continue, particularly as the number of rocket launches increase substantially in the years ahead. Slide 8. As I mentioned earlier, expansion in naval and marine applications is very exciting and is in part why we're expanding our manufacturing efforts tied to design and qualification of naval components for our US customers. For example, in shipbuilding, we're collaborating with Huntington Ingalls to enable the first-to-market direct printed copper-nickel alloy solutions for naval components, dramatically shortening production times, often from months to days. In addition to providing design flexibility for enhanced performance, these materials are critical to performance in seawater environments, but like so many specialized alloys, they're very difficult to manufacture using traditional methods. Direct Metal Printing from powder solves this problem and provides system designers flexibility in next-generation componentry.

Speaker #2: Slide 8. As I mentioned earlier, expansion in naval and marine applications is very exciting. And it's in part why we're expanding our manufacturing efforts tied to design and qualification of naval components for our U.S. customers.

Speaker #2: For example, in shipbuilding, we're collaborating with Huntington Ingalls to enable the first-to-market direct-printed copper-nickel alloy solutions for naval components, dramatically shortening production times—often from months to days.

Jeffrey Graves: In addition to providing design flexibility for enhanced performance, these materials are critical to performance in seawater environments, but like so many specialized alloys, they're very difficult to manufacture using traditional methods. Direct Metal Printing from powder solves this problem and provides system designers flexibility in next-generation componentry.

Speaker #2: In addition to providing design flexibility for enhanced performance, these materials are critical to performance in seawater environments. But, like so many specialized alloys, they're very difficult to manufacture using traditional methods.

Speaker #2: Direct metal printing from powder solves this problem and provides system designers flexibility in next-generation componentry. This early success has resulted in increased volumes within our parts manufacturing, as we design and qualify parts, as well as the transfer of that technology to tier-one suppliers to the US Navy through the sale of our metal printing systems.

Jeffrey Graves: This early success has resulted in increased volumes within our parts manufacturing as we design and qualify parts, as well as the transfer of that technology to tier one suppliers for the US Navy through the sale of our metal printing systems. Slide 9. As we look toward the future, we also expect recent provisions in the National Defense Authorization Act, or NDAA, which restrict foreign source 3D printing systems for the Department of Defense programs, will create additional tailwinds for our business as demand shifts to domestic suppliers. Having positioned ourselves well through sustained investments in metal-related technologies for aerospace and defense markets over the last several years, we remain confident in our ability to deliver on our 20% growth target in this segment in 2026.

Speaker #2: Slide 9. As we look toward the future, we also expect recent provisions in the National Defense Authorization Act, or NDAA, which restrict foreign-sourced 3D printing systems for the Department of Defense programs, will create additional tailwinds for our business as demand shifts to domestic suppliers.

Speaker #2: Having positioned ourselves well through sustained investments in metal-related technologies for aerospace and defense markets over the last several years, we remain confident in our ability to deliver on our 20% growth target in this segment in 2026.

Speaker #2: Strategically, we have very little exposure to lower-end applications such as jigs and fixtures used in factories, an area we believe will be under increased pricing pressure from non-US suppliers in the years ahead.

Jeffrey Graves: Strategically, we have very little exposure to lower-end applications such as jigs and fixtures used in factories, an area we believe will be under increased pricing pressure from non-US suppliers in the years ahead. Instead, our growth will be led by expansion in the use of 3D printing for metal components manufactured by either casting where printer sales and material consumption drives revenue and profit margins, or by Direct Metal Printing, where parts sales followed by printer sales and service provide similar financial benefits. In terms of key applications, they will lie within satellite, naval, aero propulsion systems, as well as the expanding use of sophisticated flight and weapon systems in unmanned aerial vehicles or drones, as they're commonly referred to. To address our anticipated growth in aerospace and defense, we recently announced a major expansion of our US facility in Littleton, Colorado.

Speaker #2: Instead, our growth will be led by expansion in the use of 3D printing for metal components. Manufactured by either casting or printer sales and material consumption drives revenue and profit margins, or by direct metal printing, where part sales, followed by printer sales and service, provide similar financial benefits.

Speaker #2: In terms of key applications, they will lie within satellite, naval, and air propulsion systems, as well as the expanding use of sophisticated flight and weapon systems in unmanned aerial vehicles, or drones as they're commonly referred to.

Jeffrey Graves: To address our anticipated growth in aerospace and defense, we recently announced a major expansion of our US facility in Littleton, Colorado. We're adding up to 80,000 square feet to increase our application development, process qualification, validation, and production scale manufacturing capacity. This positions us to capitalize on the growing demand for secure US-based manufacturing for national security and space applications, effectively leverages our quality and manufacturing infrastructure that also support our healthcare business.

Speaker #2: To address our anticipated growth in aerospace and defense, we recently announced a major expansion of our US facility in Littleton, Colorado. We're adding up to 80,000 square feet to increase our application development, process qualification, validation, and production-scale manufacturing capacity.

Jeffrey Graves: We're adding up to 80,000 square feet to increase our application development, process qualification, validation, and production scale manufacturing capacity. This positions us to capitalize on the growing demand for secure US-based manufacturing for national security and space applications, effectively leverages our quality and manufacturing infrastructure that also support our healthcare business. Moving next to slide 10. Our second key focal area is personalized health services or PHS, which realized double-digit growth once again in 2025, becoming our largest healthcare segment, we continue to build on our market-leading position with new personalized applications, materials, and printing technologies. In 2025, we reached new levels of care by providing more than 18,000 personalized planning cases, boosting our total to over 400,000 patients.

Speaker #2: This positions us to capitalize on the growing demand for secure US-based manufacturing for national security and space applications, and effectively leverages our quality and manufacturing infrastructure that also support our healthcare business.

Jeffrey Graves: Moving next to slide 10. Our second key focal area is personalized health services or PHS, which realized double-digit growth once again in 2025, becoming our largest healthcare segment, we continue to build on our market-leading position with new personalized applications, materials, and printing technologies. In 2025, we reached new levels of care by providing more than 18,000 personalized planning cases, boosting our total to over 400,000 patients.

Speaker #2: Moving next to Slide 10. Our second key focal area is personalized health services, or PHS, which realizes double-digit growth once again in 2025, becoming our largest healthcare segment.

Speaker #2: And we continue to build on our market-leading position with new personalized applications, materials, and printing technologies. In 2025, we reach new levels of care.

Speaker #2: By providing more than 18,000 personalized planning cases, boosting our total to over 400,000 patients. We provided over 260,000 customized inpatient implants, all of which required regulatory approval and the meeting of strict quality standards.

Jeffrey Graves: We provided over 260,000 customized in-patient patient implants, all of which required regulatory approval and the meeting of strict quality standards. We raised our total FDA and CE mark device count to over 100. We're very proud of this business and the impact it has on patients' quality of life each day. Our sustained growth in this segment is driven by our innovation in cost-effective personalization in cranio-maxillo-facial or CMF procedures through our partnership with Stryker. Typical applications here include jaw and cranial procedures, as well as reconstruction in the head and neck regions utilizing our FDA-cleared titanium metal implants, as well as our medical-grade PEEK material and implants.

Speaker #2: And we raised our total FDA- and CE-marked device count to over 100. We're very proud of this business and the impact it has on patients' quality of life each day.

Speaker #2: Our sustained growth in this segment is driven by our innovation and cost-effective personalization. In cranial maxillofacial, or CMF, procedures, this is through our partnership with Stryker.

Speaker #2: Typical applications here include jaw and cranial procedures, as well as reconstruction in the head and neck regions utilizing our FDA-cleared titanium metal implants as well as our medical-grade PEEK material and implants.

Speaker #2: The latter innovation has opened an entirely new set of applications. Due to PEEK's unique capability to offer bone-like properties, excellent biocompatibility, and transparency to radiation—such as those needed for X-rays and oncology treatment protocols.

Jeffrey Graves: The latter innovation has opened an entire new set of applications due to PEEK's unique capability to offer bone-like properties, excellent biocompatibility, and transparency to radiation, such as those needed for X-rays and for oncology treatment protocols. Our ability to work directly with surgeons on all stages of treatment, from planning and modeling of a surgical procedure to providing custom surgical guides to improve precision and speed of an operation, to printing customized replacement segments of bone for long-term use in a patient's body, has built an exceptional foundation for our expanding orthopedic business. We've evolved not only our printing technologies, but also our operational capabilities needed to expand our markets, which now include not only preplanned surgical procedures, but also rapid response trauma cases and highly complex oncology cases involving bone cancer and at times, a related need to treat the surrounding tissue.

Speaker #2: Our ability to work directly with surgeons on all stages of treatment from planning and modeling of a surgical procedure to providing custom surgical guides, to improved precision and speed of an operation, to printing customized replacement segments of bone for long-term use in a patient's body, has built an exceptional foundation for our expanding orthopedic business.

Jeffrey Graves: We've evolved not only our printing technologies, but also our operational capabilities needed to expand our markets, which now include not only preplanned surgical procedures, but also rapid response trauma cases and highly complex oncology cases involving bone cancer and at times, a related need to treat the surrounding tissue.

Speaker #2: We've evolved not only our printing technologies, but also our operational capabilities needed to expand our markets, which now include not only pre-planned surgical procedures, but also rapid-response trauma cases and highly complex oncology cases.

Speaker #2: Involving bone cancer and, at times, a related need to treat the surrounding tissue. To keep our focus on the leading edge of patient treatment, we've developed unique point-of-care embedded collaboration teams at numerous medical research hospitals in the US and Europe.

Jeffrey Graves: To keep our focus on the leading edge of patient treatment, we've developed unique point-of-care embedded collaboration teams at numerous medical research hospitals in the US and Europe. These teams are bringing our most advanced medical technology directly to surgeons for their integration in the most challenging new cases. This gives us direct insight into the value that our metal and polymer printing solutions can bring to future patient treatment and services that are needed to guide our future investments. We expect our strong pipeline of new applications and shortened response times to fuel continued growth in PHS in 2026 and beyond. As one example, we believe that our recently received FDA clearance for our VSP solutions for skeletally mature adolescents will help accelerate adoption in what was previously a case-by-case compassionate use protocol. Now turning to slide 11.

Speaker #2: These teams are bringing our most advanced medical technology directly to surgeons for their integration in the most challenging new cases. This gives us direct insight into the value that our metal and polymer printing solutions can bring to future patient treatment and services.

Speaker #2: They're needed to guide our future investments. We expect our strong pipeline of new applications and shortened response times to fuel continued growth in PHS in 2026 and beyond.

Speaker #2: As one example, we believe that our recently received FDA clearance for our VSP solutions for skeletally mature adolescents will help accelerate adoption in what was previously a case-by-case compassionate use protocol.

Speaker #2: So now, turning to Slide 11. In our dental business, we began shipments of our commercial NextDent jetted denture platform solution for the U.S. market in the fourth quarter.

Jeffrey Graves: In our dental business, we began shipments of our commercial NextDent Jetted Denture Solution for the US market in Q4. Our unique multi-material monolithic denture is not only a beautiful product, distinctive in its durability and wear resistance, but is increasingly praised by patients for its comfort and fit, which not only improves the patient's quality of life, but also reduces chair time for the dentist and often a need for repeated visits to adjust the fit over time. Expanding upon our initial offering, and just in February, we announced a broadened range of available gum shades to more accurately match the diversity of patients' natural gum colors in the US population. Looking to the addressable market, in addition to FDA approval in the United States, we now have clearance in New Zealand, Colombia, and Chile.

Speaker #2: Our unique multi-material monolithic denture is not only a beautiful product, distinctive in its durability and wear resistance, but is increasingly praised by patients for its comfort and fit.

Speaker #2: This not only improves the patient's quality of life, but also reduces chair time for the dentist and often the need for repeated visits to adjust the fit over time.

Speaker #2: Expanding upon our initial offering, and just in February, we announced a broadened range of available gum shades to more accurately match the diversity of patients’ natural gum colors in the U.S. population.

Speaker #2: Looking to the addressable market, in addition to FDA approval in the United States, we now have clearance in New Zealand, Colombia, and Chile. We expect to achieve full European clearance this summer, with additional South American markets coming online in the second half of the year, and most of our target markets in Asia next year.

Jeffrey Graves: We expect to achieve full European clearance this summer, with additional South American markets coming online in the second half of the year and most of our target markets in Asia next year. Many investors have asked about the size of this dental opportunity, so let me take a moment to speak to it. In the United States, approximately 32 million people wear dentures. That's about 10% of our population, and roughly 12% get new dentures each year. Globally, more than 180 million people wear dentures, and approximately 13.7 million denture sets are produced each year to address this market. Due to aging populations worldwide, this number is growing rapidly. The vast majority of these dentures are custom-made with slow analog processes and in large part by hand craftsmanship.

Speaker #2: Many investors have asked about the size of this dental opportunity, so let me take a moment to speak to it. In the United States, approximately 32 million people wear dentures.

Speaker #2: That's about 10% of our population. And roughly 12% get new dentures each year. Globally, more than 180 million people wear dentures. And approximately 13.7 million denture sets are produced each year to address this market.

Speaker #2: Due to aging populations worldwide, this number is growing rapidly. The vast majority of these dentures are custom-made with slow, analog processes, and in large part by hand craftsmanship.

Speaker #2: With the advent of digital workflows, and with our new jetting technology, and the ability to make beautiful, comfortable, custom single-piece dentures in a cost-effective manner close to the dentist and their patients, we believe, over time, we will convert the large majority of this manufacturing to 3D printing, just as it has with clear aligners today.

Jeffrey Graves: With the advent of digital workflows and with our new jetting technology and ability to make beautiful, comfortable, custom single-piece dentures in a cost-effective manner close to the dentist and their patients, we believe over time we'll convert the large majority of this manufacturing to 3D printing, just as it has with clear aligners today. We also believe that this will result in annual recurring revenue opportunity of over $400 million globally for simply materials alone. From a competitive standpoint, our solution delivers an exceptional ROI for our customers, enabling faster production, a reduction in manual labor on the order of 40% to 70%, and one-day turnaround compared to five days for traditional methods.

Speaker #2: We also believe that this will result in annual recurring revenue opportunity of over $400 million globally for simply materials alone. From a competitive standpoint, our solution delivers an exceptional ROI for our customers.

Speaker #2: Enabling faster production, a reduction in manual labor on the order of 40 to 70 percent, and one-day turnaround compared to five days for traditional methods.

Speaker #2: This results in a faster, more cost-effective, and highly scalable alternative to traditional denture fabrication, enabling both an outstanding patient experience and a strong return on investment for dental labs that provide these products to dental professionals each day.

Jeffrey Graves: This results in a faster, more cost-effective, and highly scalable alternative to traditional denture fabrication, enabling both an outstanding patient experience and a strong return on investment for dental labs that provide these products to dental professionals each day. While still in its earliest stage, given the pace of adoption that's possible in the dental industry, I predict this will become one of the largest revenue streams in our company in the years ahead. It's simply a matter of adoption rate at this point. Moving to the next slide 12. In closing, the stabilization of our core markets, combined with our cost reduction efforts, is enabling us to invest in new growth opportunities that are now opening before us, leaving us more excited about the year ahead than we have been in some time. Moving to slide 13.

Speaker #2: While still in its earliest stage, given the pace of adoption that's possible in the dental industry, I predict this will become one of the largest revenue streams in our company in the years ahead.

Speaker #2: It's simply a matter of adoption rate at this point. Moving to the next slide, Slide 12. In closing, the stabilization of our core markets, combined with our cost-reduction efforts, is enabling us to invest in new growth opportunities that are now opening before us.

Speaker #2: Leaving us more excited about the year ahead than we have been in some time. Moving to Slide 13. Before I turn it over to Phyllis for a recap of our financials, I want to take a moment to acknowledge our founder and chief technology officer, Chuck Hall.

Jeffrey Graves: Before I turn it over to Phyllis for a recap of our financials, I want to take a moment to acknowledge our founder and Chief Technology Officer, Chuck Hull, who was recently named by Forbes Magazine as one of America's top 250 greatest innovators. Chuck's been honored by countries and organizations around the world for his past accomplishments, and yet I believe his greatest achievements are still yet to come as he works closely with the visionary, Dr. Martine Rothblatt of United Therapeutics, to develop the world's first 3D-printed human lung. Two weeks ago, I had the honor of accompanying Chuck to the Lake Nona Impact Forum, where he and Martine addressed a standing-room-only crowd on the lung program.

Speaker #2: Who was recently named by Forbes Magazine as one of America's top 250 greatest innovators. Chuck's been honored by countries and organizations around the world for his past accomplishments.

Speaker #2: And yet, I believe his greatest achievements are still yet to come, as he works closely with the visionary Dr. Martin Rothblatt of United Therapeutics to develop the world's first 3D-printed human lung.

Speaker #2: Two weeks ago, I had the honor of accompanying Chuck to the Lake Nona Impact Forum, where he and Martin addressed a standing-room-only crowd on a lung program.

Speaker #2: I, along with the rest of the audience, stood in admiration of the progress that's been made and the impact on the world that is anticipated when this is ultimately successful.

Jeffrey Graves: I, along with the rest of the audience, stood in admiration of the progress that's been made and the impact on the world that is anticipated when this is ultimately successful. On behalf of all of my colleagues at 3D Systems and those millions of people around the world that have been and will be impacted by Chuck's innovations, I want to say a heartfelt thank you to him for his dedication and his contributions to all mankind. I look forward to the documentary on Chuck's life that'll be selectively aired this summer and extended audiences everywhere in early 2027. With that, I'll now turn it over to Phyllis.

Speaker #2: On behalf of all of my colleagues at 3D SYSTEMS and those millions of people around the world that have been and will be impacted by Chuck's innovations, I want to say a heartfelt thank you.

Speaker #2: To him for his dedication, and his contributions to all mankind. I look forward to the documentary on Chuck's life that'll be selectively aired this summer.

Speaker #2: And extended audiences everywhere in early 2027. So with that, I'll now turn it over to Phyllis. Thank you, Jeff. And good morning, everyone. Before I begin reviewing our fourth-quarter results, I'd like to remind you that we completed the divestiture of our GeoMagic software business on April 1, 2025.

Phyllis Nordstrom: Thank you, Jeff, good morning, everyone. Before I begin reviewing our Q4 results, I'd like to remind you that we completed the divestiture of our Geomagic software business on 1 April 2025. Throughout today's call, I will reference both reported results and adjustment comparisons that exclude Geomagic to provide a clear apples-to-apples comparison of our performance across periods. Additionally, in Q4 2024, we recorded a one-time Regenerative Medicine accounting adjustment that reduced revenue by $8.7 million due to a change in estimate. I will reference this accounting adjustment when discussing certain prior year comparisons. I would like to start off by highlighting a few of our key accomplishments in 2025. We have been strongly focused on driving expense reductions, while also supporting new product launches, strengthening our balance sheet by reducing debt, and improving operational excellence and cost discipline.

Speaker #2: Throughout today's call, I will reference both reported results and adjustment comparisons that exclude GeoMagic to provide a clear, apples-to-apples comparison of our performance across periods.

Speaker #2: Additionally, in the fourth quarter of 2024, we recorded a one-time regenerative medicine accounting adjustment that reduced revenue by $8.7 million, due to a change in estimate.

Speaker #2: I will reference this accounting adjustment when discussing certain prior-year comparisons. I would like to start off by highlighting a few of our key accomplishments in 2025.

Speaker #2: We have been strongly focused on driving expense reductions while also supporting new product launches, strengthening our balance sheet by reducing debt, and improving operational excellence and cost discipline.

Speaker #2: These actions have enhanced the strength of our core business while allowing us to invest in new growth opportunities that are now beginning to deliver results.

Phyllis Nordstrom: These actions have enhanced the strength of our core business while allowing us to invest in new growth opportunities that are now beginning to deliver results. I will begin with revenue for the quarter, turning to slide 15. Q4 consolidated revenue was $106.3 million, an increase of 3% year-over-year, adjusting for Geomagic. When further adjusting for the Regenerative Medicine adjustment impacting prior year Q, consolidated revenue declined 5%. Year-over-year decrease was primarily driven by softness in industrial printer and materials demand, which was partially offset by double-digit growth across our priority markets, including both PHS and aerospace and defense. Now to slide 16.

Speaker #2: I will begin with revenue for the quarter, turning to Slide 15. Fourth quarter consolidated revenue was $106.3 million and increased 3% year over year, adjusting for GeoMagic.

Speaker #2: When further adjusting for the regenerative medicine adjustment impacting the prior-year quarter, consolidated revenue declined 5%. The year-over-year decrease was primarily driven by softness in industrial printer and materials demand, which was partially offset by double-digit growth across our priority markets.

Speaker #2: Including both PHS and Aerospace and Defense. Now, to Slide 16. As we manage revenue headwinds in the first three quarters of the year, we saw, reflecting not only normal seasonality, but also what we believe to be a return to growth as we exit 2025 and begin 2026.

Phyllis Nordstrom: As we managed revenue headwinds in the first 3 quarters of the year, we saw solid strengthening in Q4, reflecting not only normal seasonality, but also what we believe to be a return to growth as we exit 2025 and begin 2026. We believe the sequential improvement is driven by returning customer demand and our focus on priority markets that continue to accelerate the adoption of additive manufacturing. With that summary, I will now walk through our sequential revenue growth for the quarter. Q4 consolidated revenue increased 16% sequentially from Q3, driven by growth in new printer system sales and increased materials consumption. Within our segments, Industrial Solutions revenue was $55.8 million, an increase of 15% sequentially.

Speaker #2: We believe the sequential improvement is driven by returning customer demand and our focus on priority markets that continue to accelerate the adoption of additive manufacturing.

Speaker #2: With that summary, I will now walk through our sequential revenue growth for the quarter. Fourth quarter consolidated revenue increased 16% sequentially from the third quarter, driven by growth in new printer system sales. Within our segments, Industrial Solutions revenue was $55.8 million.

Speaker #2: An increase of 15% sequentially. This growth was driven by continued strength in aerospace and defense, as well as higher new printer sales within our consumer end markets.

Phyllis Nordstrom: This growth was driven by continued strength in aerospace and defense, as well as higher new printer sales within our consumer end markets, including increasing demand for our new NGP printer for jewelry applications. Healthcare Solutions revenue of $50.5 million grew 18% sequentially. This increase was primarily driven by the strengthening of dental material sales within the quarter and the continued positive performance of our PHS business. Now moving to slide 17. In reviewing 2025 performance, the additive manufacturing industry faced strong macroeconomic headwinds impacting customer spending. As a result, we realized a decline in our year-over-year revenue. For the full year 2025, consolidated revenue was $387 million. When adjusting for the divestiture of Geomagic, revenue declined 7% year-over-year, or 9% when adjusting for both Geomagic and the prior year Regenerative Medicine adjustment.

Speaker #2: Including increasing demand for our new MGP printer for jewelry applications. Healthcare solutions revenue of $50.5 million grew 18% sequentially. This increase was primarily driven by the strengthening of dental material sales within the quarter, and the continued positive performance of our PHS business.

Speaker #2: Now moving to Slide 17. In reviewing 2025 performance, the additive manufacturing industry faced strong macroeconomic headwinds impacting customer spending. As a result, we realized a decline in our year-over-year revenue.

Speaker #2: For the full year 2025, consolidated revenue was 387 million. When adjusting for the divestiture of GeoMagic, revenue declined 7% year over year, or 9% when adjusting for both GeoMagic and the prior-year regenerative medicine adjustment.

Speaker #2: Turning to Slide 18. For the fourth quarter, non-GAAP gross margin was 31%, up 3% when adjusting for GeoMagic and down 2% when adjusting for both GeoMagic and regenerative medicine.

Phyllis Nordstrom: Turning to slide 18. For the Q4, non-GAAP gross margin was 31%, up 3% when adjusting for Geomagic and down 2% when adjusting for both Geomagic and Regenerative Medicine. For full year 2025, non-GAAP gross margin was 34.3%, down 70 basis points when adjusting for Geomagic and down 2 percentage points when adjusting for both Geomagic and Regenerative Medicine. Non-GAAP gross margin decline over the prior periods was primarily driven by lower sales volume and less favorable product mix in the current quarter. Moving to slides 19 and 20. We continue to see the positive impact of our cost reduction initiatives, both in the Q4 and for the full year 2025. In the Q4, non-GAAP operating expenses were $43 million, down 23% or $13 million from the prior year period when adjusting for Geomagic.

Speaker #2: For full year 2025, non-GAAP gross margin was 34.3%. Down 70 basis points when adjusting for GeoMagic, and down 2 percentage points when adjusting for both GeoMagic and regenerative medicine.

Speaker #2: Non-GAAP gross margin declined over the prior periods was primarily driven by lower sales volume and less favorable product mix in the current quarter. Moving to Slides 19 and 20.

Speaker #2: We continue to see the positive impact of our cost reduction initiatives, both in the fourth quarter and for the full year 2025. In the fourth quarter, non-GAAP operating expenses were $43 million, down 23%, or $13 million, from the prior-year period when adjusting for GeoMagic.

Speaker #2: For the full year, non-GAAP operating expenses were 196 million, a reduction of 19% or 46 million year over year when adjusting for GeoMagic. We remain keenly focused on executing the cost reduction initiatives we have previously outlined.

Phyllis Nordstrom: For the full year, non-GAAP operating expenses were $196 million, a reduction of 19% or $46 million year-over-year when adjusting for Geomagic. We remain keenly focused on executing the cost reduction initiatives we have previously outlined. Actions already underway and that will be complete by the first half of 2026 include optimizing our organizational capacity, streamlining our facilities footprint, and reducing expenses across our business. To date, our cost reduction and efficiency programs have delivered approximately $55 million in annualized savings completed in 2025, exceeding our target of $50 million. Looking ahead to the first half of 2026, our cost savings initiatives will remain closely aligned with the company's 2026 priorities, ensuring we focus on investments on the products and markets with the strongest opportunity for both growth and profitability. Moving to slide 21 to finalize the P&L.

Speaker #2: Actions already underway and that will be complete by the first half of 2026 include optimizing our organizational capacity, streamlining our facility's footprint, and reducing expenses across our business.

Speaker #2: To date, our cost reduction and efficiency programs have delivered approximately 55 million in annualized savings completed in 2025, exceeding our target of 50 million.

Speaker #2: Looking ahead to the first half of 2026, our cost savings initiatives will remain closely aligned with the company's 2026 priorities, ensuring we focus investments on the products and markets with the strongest opportunity for both growth and profitability.

Speaker #2: Moving to Slide 21 to finalize the P&L. Adjusted EBITDA for the fourth quarter was negative 5.3 million, an improvement of 17 million compared to the prior year when adjusting for GeoMagic.

Phyllis Nordstrom: Adjusted EBITDA for Q4 was -$5.3 million, an improvement of $17 million compared to the prior year when adjusting for Geomagic. For the full year 2025, Adjusted EBITDA was -$45.4 million, an improvement of $31 million when adjusting for Geomagic. Adjusted EBITDA improvements were primarily driven by the company's cost reduction initiatives, which delivered meaningful expense reductions throughout 2025. Full year 2025 non-GAAP loss per share was $0.37, an improvement from a loss of $0.62 in the prior year period. Moving to slide 22 for a review of the balance sheet. We ended the quarter with $97.1 million in total cash, consisting of $95.6 million in cash and cash equivalents and $1.5 million in restricted cash.

Speaker #2: For the full year 2025, adjusted EBITDA adjusted EBITDA was negative 45.4 million, an improvement of 31 million when adjusting for GeoMagic. Adjusted EBITDA improvements were primarily driven by the company's cost reduction initiatives, which delivered meaningful expense reductions throughout 2025.

Speaker #2: Full year 2025, non-GAAP loss per share was 37 cents. An improvement from a loss of 62 cents in the prior-year period. Now moving to Slide 22 for a review of the balance sheet.

Speaker #2: We ended the quarter with $97.1 million in total cash, consisting of $95.6 million in cash and cash equivalents, and $1.5 million in restricted cash.

Speaker #2: During the quarter, we executed an equitization transaction to retire the majority of our debts scheduled to mature in the fourth quarter of 2026. As a result, only $3.9 million of that debt now remains outstanding, with the remaining $92 million scheduled to mature in 2030.

Phyllis Nordstrom: During the quarter, we executed an equitization transaction to retire the majority of our debt scheduled to mature in the Q4 2026. As a result, only $3.9 million of that debt now remains outstanding, with the remaining $92 million scheduled to mature in 2030. As we move to 2026, my priorities remain focused on continuing to optimize our cost structure while working closely with the business to prioritize the key growth markets. Lastly, I'll turn to slide 23 for an update on the company's 2026 outlook. Given the current geopolitical environment and its potential impact on near-term macroeconomic conditions, we believe at this time it is appropriate to limit financial guidance the Q1 2026.

Speaker #2: As we move to 2026, my priorities remain focused on continuing to optimize our cost structure while working closely with the business to prioritize the key growth markets.

Speaker #2: Lastly, I'll turn to Slide 23 for an update on the company's 2026 outlook. Given the current geopolitical environment and its potential impact on near-term macroeconomic conditions, we believe at this time it is appropriate to limit financial guidance to the first quarter of 2026.

Speaker #2: We expect revenue to be in the range of 91 million to 94 million, and adjusted EBITDA to be within the range of a loss of 5 million to a loss of 3 million for the quarter.

Phyllis Nordstrom: We expect revenue to be in the range of $91 million to $94 million and Adjusted EBITDA to be within the range of a loss of $5 million to a loss of $3 million for the quarter. Key contributors to our Q1 performance include cost, continued cost management discipline, consistent execution of our core business, strong performance in our priority markets, and positive momentum in product sales driven by our recent printer launches. We thank you for your time and continued support of 3D Systems. We will now open the line for questions. Operator?

Speaker #2: Key contributors to our first quarter performance include continued cost management discipline, consistent execution of our core business, strong performance in our priority markets, and positive momentum in product sales driven by a recent printer launches.

Speaker #2: We thank you for your time and continued support of 3D SYSTEMS. We will now open the line for questions. Operator?

Speaker #1: Thank you. We will now be conducting a question and answer session. If you would like to be placed in the question queue, please press *1 on your telephone keypad.

Operator: Thank you. We'll now be conducting a question-and-answer session. If you'd like to be placed in the question queue, please press star 1 on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star 2 if you'd like to remove your question from the queue. One moment please while we poll for questions. Our first question is coming from Jim Ricchiuti from Needham & Company. Your line is now live.

Speaker #1: A confirmation tone will indicate your line is in the question queue. You may press *2 if you'd like to remove your question from the queue.

Speaker #1: One moment, please, while we pull for questions. Our first question is coming from Jim Rashuti from Needham & Company. Your line is now live.

Speaker #3: Hi, good morning. I'm Phyllis. I may have missed it. I apologize. But could you give any color as to how we should be thinking about operating expense in the seasonally weaker Q1, just versus Q4?

Jim Ricchiuti: Hi, good morning. Phyllis, I may have missed it, I apologize, but did you give any color as to how we should be thinking about operating expense at the seasonally weaker Q1 just versus Q4?

Speaker #4: Yeah, I think operating expenses—remember, Q1 is seasonably higher for us in terms of spend. So, when you look for 2026, I'd say look for slight increases in Q1 and Q2, with a pretty steep drop-off as we get into Q3 and Q4 to normalize a little bit less year-over-year than what we had in 2025.

Phyllis Nordstrom: Yeah, I think operating expenses, you know, remember Q1 is seasonally more higher for us in terms of spend. When you look for 2026, I'd say look for slight increases in Q1 and Q2 with a pretty steep drop off as we get into Q3 and Q4 to normalize a little bit less year-over-year than what we had in 2025.

Speaker #3: I appreciate that. And just how much of that industrial business is currently being derived from AMD? And Jeff, you highlighted several drivers in that AMD business.

Jim Ricchiuti: I appreciate that. Just how much of that industrial business is currently being derived from A&D? Jeff, you highlighted several drivers in that A&D business. How balanced are these revenue streams in A&D, or is it more concentrated in any one area?

Speaker #3: How balanced are these revenue streams in AMD, or is it more concentrated in any one area?

Jeffrey Graves: On your last question there, Jim, it's pretty diverse. The four areas I outlined, and I know it, they're still very broad areas, I'd try to give some more concrete examples, but those four areas are all strong. I, you know, A&D is such a broad area. You could find other areas to focus on too. For us, the four areas I mentioned are we know we have a good technology base, we have a good runway in, and we're doing well in. You know, I really like the naval applications. Doing very well. You know, printing these more exotic materials that are resistant to seawater is great. Some of the lightweight structures for rockets and planes, terrific stuff.

Speaker #5: So, on your last question there, Jim, it's pretty diverse. The four areas I outlined—and I know they're still very broad areas—so I'll try to give some more concrete examples.

Speaker #5: But those four areas are all strong. And AMD is such a broad area; you could find other areas to focus on too. For us, the four areas I mentioned are ones we know we have a good technology base in, we have a good runway in, and we're doing well in.

Speaker #5: So, I really like the Naval applications—doing very well. The printing of these more exotic materials that are resistant to seawater is great. Some of the lightweight structures for rockets and planes—terrific stuff.

Speaker #5: Titanium, the more exotic aluminum alloys—things like that that are required for those—are super. The propulsion systems themselves, for rockets, are particularly interesting. And then also, aero propulsion for engines.

Jeffrey Graves: Titanium, the more exotic aluminum alloys, things like that are required for those are super. The propulsion systems themselves for rockets, particularly interesting, and then also aero propulsion for engines. Those are all really exciting areas. In terms of total revenue, I don't. Have we broken that out?

Speaker #5: So those are all really exciting areas. In terms of total revenue, I don't have we broken that out?

Speaker #4: We have not. But it is one of our top industrial segments. It's on track to be our largest industrial segment or market within the 2026 fiscal year.

Phyllis Nordstrom: We have not, but it is one of our top industrial segments. It's on track to be our largest industrial segment or market within the 2026 fiscal year. It continues to produce sizable and meaningful revenue both on the top and bottom line for industrial. Its growth is about 16% year-over-year from 2024 to 2025, with really heavy sales coming from both printers and parts in 2025 as well.

Speaker #4: So it continues to produce sizable and meaningful revenue both on the top and bottom line. For industrial, its growth is about 16% year over year from '24 to '25, with really heavy sales coming from both printers and parts.

Speaker #4: In 2025 as well.

Speaker #5: And Jim, certainly the added capacity we're putting in, and little's in right now, should be done by early summer. And we'll be phasing that in the second half of the year.

Jeffrey Graves: Jim, certainly the added capacity we're putting in in Littleton right now should be done by early summer. We'll be phasing that in the second half of the year. It reflects the growing demand we see from, broadly from DoD-driven applications that are working really with their tier one suppliers to those defense systems.

Speaker #5: But it reflects the growing demand we see from broadly from DoD-driven applications working really with their Tier 1 suppliers to those defense systems.

Speaker #3: Got it. Thanks very much.

Jim Ricchiuti: Got it. Thanks very much.

Speaker #5: You're welcome.

Jeffrey Graves: You're welcome.

Speaker #4: Thank you.

Phyllis Nordstrom: Thank you.

Speaker #1: Thank you. And next question, today is coming from Greg Palm from Craig Hallum. Your line is now live.

Operator: Thank you. Our next question today is coming from Greg Palm from Craig-Hallum. Your line is now live.

Speaker #6: Hey, good morning. Thanks for taking the questions. Going back to Q4, just a couple of questions on the results in terms of the upside on revenue.

Greg Palm: Hey, good morning. Thanks for taking the questions. Going back to Q4, just a couple of questions on the results in terms of the upside on revenue, I guess, what outperformed relative to expectations back in, I guess, November. On gross margin specifically, can you just maybe unpack that a little bit more? I think it was negative mix, but that was down sequentially on much higher revenues, so maybe just a little bit more color there.

Speaker #6: I guess, what outperformed relative to expectations back in, I guess, November? And on gross margin specifically, can you just maybe unpack that a little bit more?

Speaker #6: I think it was negative mix, but that was down sequentially on much higher revenues. So maybe just a little bit more color there.

Speaker #4: Sure. So just looking at Q4, I think we over-indexed really in aerospace and defense. The mix for aerospace and defense, both on the margin side, but then a little bit of upside on the top-line revenue was strong.

Phyllis Nordstrom: Sure. Just looking at Q4, I think we over-indexed really in aerospace and defense. The mix for aerospace and defense, both on the margin side, a little bit of upside on the top line revenue was strong. PHS, and our liner materials were strong for the quarter. We also had an upswing in our healthcare parts for the quarter as well, which helped contribute to the excess, you know, revenue that we, you know, anticipated when we first set guidance. I think we were pretty spot on. On the margin side, you know, we heavily were weighted towards printers. In Q4, we had several new printer launches in the back half of the year. Printers just carry a lower margin, I wasn't too surprised in seeing that.

Speaker #4: PHS, and our liner materials were strong for the quarter. We also had an upswing in our healthcare parts for the quarter as well, which helped contribute to the excess revenue that we anticipated when we first set guidance.

Speaker #4: So, I think we were pretty spot on. On the margin side, we were heavily weighted towards printers in Q4. We had several new printer launches in the back half of the year.

Speaker #4: Printers just carry a lower margin, so I wasn't too surprised in seeing that. But the overall, just decline in revenue year over year, holistically, was what we'll address next year as we start to look at margin pull-through from some of the new printer launches and just the increase in volume overall for the year.

Phyllis Nordstrom: The overall just decline in revenue year-over-year holistically was what we'll address next year as we start to look at margin pull through from some of the new printer launches and just the increase in volume overall for the year.

Speaker #6: Okay. And just thinking about Q1 specifically, I just want to make sure I'm understanding this right. So you're guiding revenue down quite a bit sequentially.

Greg Palm: Okay. Just thinking about Q1 specifically, I just wanna make sure I'm understanding this right. You're guiding revenue down quite a bit sequentially. You're guiding OpEx up a little bit and, you know, improved EBITDA. This is all sequentially. That implies, I mean, a massive boost in gross margin from Q4 to Q1. I just wanna make sure that's what the guide implies.

Speaker #6: You're guiding OPEX up a little bit, and improved EBITDA. This is all sequentially. So that implies, I mean, a massive boost in gross margin from Q4 to Q1.

Speaker #6: I just want to make sure that's what the guide implies.

Speaker #4: So, I'll correct one item. We are pretty consistent with the prior year, if you exclude Geomagic. Geomagic had high revenue in Q1 of 2025.

Phyllis Nordstrom: I'll correct 1 item. We are pretty consistent with the prior year if you exclude Geomagic. Geomagic had, you know, high revenue in Q1 of 2025. That was the last quarter in which we had Geomagic. We've replaced that revenue with other sources for Q1 of 2026, and we had very strong operational expense savings that are gonna be coming through Q1 as well. While I said it's a seasonally higher spending, our overall reductions are gonna see meaningful results as we report results for Q1. On the margin side, I think we're doing things to protect the margin in terms of just additional cost savings activities as well as anticipated better pricing in Q1. Both of those things, I think should help to the overall Adjusted EBITDA improvement you're seeing.

Speaker #4: That was the last quarter in which we had geomagic. So we've replaced that revenue with other sources for Q1 of 2026. And we had very strong operational expense savings that are going to be coming through Q1 as well.

Speaker #4: So while I said it's a seasonally higher spending, our overall reductions are going to see meaningful results as we report results for Q1. On the margin side, I think we're doing things to protect the margin in terms of just additional cost savings activities, as well as anticipated better pricing in Q1.

Speaker #4: So both of those things, I think, should help with the overall adjusted EBITDA improvement you're seeing.

Speaker #6: Okay. But I guess I'm looking from Q4 to Q1, and I just want to make sure—based on what you've said, it implies gross margin is going to improve, I mean, meaningfully quarter over quarter.

Greg Palm: Okay. I guess I'm looking from Q4 to Q1, and I just wanna make sure it based on whatever what you've said, it implies gross margin is going to improve, I mean, meaningfully quarter-over-quarter. I just wanna make sure that's what the guide implies.

Speaker #6: And I just want to make sure that's what the guide implies.

Speaker #4: Yeah. Again, I'd say you have to look at—we certainly are anticipating gross margin improvement in Q1, but we're also anticipating continued execution of our operational cost reductions in the quarter.

Phyllis Nordstrom: Yeah. Again, I'd say you have to look at it. We certainly are anticipating gross margin improvement in Q1. We're also anticipating, you know, continued execution of our operational cost reductions in the quarter. The mix of both of those will drive the adjusted EBITDA improvement. We didn't give specific guidance on those two. As again, product mix as we close out the quarter will really sort of align on that. Overall, we anticipate gross margin improvement for sure.

Speaker #4: The mix of both of those will drive the adjusted EBITDA improvement. So we didn't give specific guidance on those two as, again, product mix as we close out the quarter, we'll really sort of align on that.

Speaker #4: But overall, we anticipate gross margin improvement, for sure.

Speaker #6: Okay. Okay. Thanks. And then just cognizant of the fact that you're only given one quarter guidance at this point, I mean, if we just think about some of the segment, A&D, you've talked about 20% growth this year.

Greg Palm: Okay. Okay, thanks. Just cognizant of the fact that you're only giving 1 quarter guidance at this point. I mean, if we just think about, you know, some of the segment, you know, A&E, you've talked about 20% growth this year. You know, personalized health, that's growing strongly. Seems like dental is improving. You're still guiding the Q1 revenue declines on a year-over-year basis, just modestly at the midpoint. I mean, is that just a weak spot, you know, for the year? I'm just trying to sort of reconcile a lot of these sort of growth areas to the Q1 guide, which still suggest a revenue decline on a year-over-year basis.

Speaker #6: Personalized health, that's growing strongly. Seems like dental's improving. You're still guiding to Q1 revenue declines on a year-over-year basis, just modestly at the midpoint.

Speaker #6: I mean, is that just a weak spot for the year? I'm just trying to sort of reconcile a lot of these sort of growth areas to the Q1 guide, which you'll suggest a revenue decline on a year-over-year basis.

Speaker #5: Yeah Greg, it gets very hard to call the actual inflection point, so we're just trying to—I love the direction that it's going. It feels good after a couple of tough years.

Jeffrey Graves: Yeah, Greg, it gets very hard to call the actual inflection point. We're just trying to, you know. I love the direction that it's going. It feels good after a couple of tough years. Things are moving in the right direction. We're just trying not to get too far ahead of ourselves. Yeah, there's no particular weakness or something that, you know, we expect in Q1 to swamp results or anything. It's continuing the trend. A&E should grow consistently. The rest of industrial is always a wild card, to be frank with you. It's much more dependent upon how people feel about the world. As you know, you know, it's a bit crazy out there right now. Oil is way up and stuff.

Speaker #5: Things are moving in the right direction. We're just trying not to get too far ahead of ourselves. So yeah, there's no particular weakness or something that we expect in Q1 to swamp results or anything.

Speaker #5: It's continuing the trend. So A&D should grow consistently. The rest of industrial is always a wild card to be frank with you. It's much more dependent upon how people feel about the world.

Speaker #5: And as you know, it's a bit crazy out there right now. Oil's way up and stuff. So, when it comes to discretionary spending on the part of consumers, that's always a concern for me when it comes to our more consumer-oriented business.

Jeffrey Graves: When it comes to discretionary spending on the part of consumers, that's always a concern for me when it comes to, you know, our more consumer-oriented business. You know, with that said, we, you know, it looked really good in Q4. It looks like it's coming back. We're launching some great new products there. It's just a more volatile consumer stuff's a bit more volatile. I love A&E. I've got high confidence there. We're gonna continue the trend. Healthcare, very stable, because most of that stuff's not optional, with the exception of aligners. Some people put off aligner purchases when things get harder. Our increased exposure to dentures is a good thing. That's gonna continue throughout the year to grow.

Speaker #5: With that said, it looked really good in Q4. It looks like it's coming back. We're launching some great new products there. It's just a more volatile consumer stuff, so a bit more volatile.

Speaker #5: So I love A&D. I've got high confidence there. We're going to continue the trend. Healthcare, very stable because most of that stuff's not optional.

Speaker #5: With the exception of aligners, some people put off aligner purchases when things get harder. But our increased exposure to dentures is a good thing.

Speaker #5: That's going to continue throughout the year to grow. And certainly, PHS, it's a very good thing because a lot of those procedures are really not optional procedures for orthopedics.

Jeffrey Graves: Certainly PHS is a very good thing 'cause a lot of those procedures are really not optional procedures for orthopedics. We're just trying, you know, we're reintroducing some guidance. We're trying to be prudent about it. I'm not gonna say it's conservative. Just trying to be prudent about how far out over our skis we get in terms of the future.

Speaker #5: So we're just trying we're introducing some guidance. We're trying to be we're trying to be prudent about it. I'm not going to say it's conservative.

Speaker #5: I'm just trying to be prudent about how far out over our skis we get in terms of the future.

Speaker #6: Yeah. Fair enough. Okay. Thanks.

Greg Palm: Yeah, fair enough. Okay, thanks.

Speaker #5: Thanks, Greg.

Jeffrey Graves: Thanks, Greg.

Speaker #6: Thank you. As a reminder, that's Star One to be placed into question queue. Our next question is coming from Kira McCabe from Canaccord Genuity.

Operator: Thank you. As a reminder, that's star one to be placed into question queue. Our next question is coming from Troy Jensen from Cantor Fitzgerald. Your line is now live.

Speaker #6: Your line is now live.

Speaker #7: Hi, it's Kira, and I'm from Troy. A couple of questions. I guess the first is, we had in the past a lot of R&D spend to refresh the product line and bring out a lot of new products that are now showing up in the results, especially in this quarter.

[Analyst] (Cantor Fitzgerald): Hi, it's Kieran on for Troy. I just had a couple of questions. I guess the first is, you know, you had in the past a lot of R&D spend to refresh the product line to bring out a lot of new products that are now, you know, showing up in the results, especially in this quarter. Given kind of your focus areas of A&E and the personal healthcare area, sort of what's your... In maintaining some investments kind of based upon Q4 R&D, kind of what's your outlook for R&D going forward?

Kieran McCabe: Hi, it's Kieran on for Troy. I just had a couple of questions. I guess the first is, you know, you had in the past a lot of R&D spend to refresh the product line to bring out a lot of new products that are now, you know, showing up in the results, especially in this quarter. Given kind of your focus areas of A&E and the personal healthcare area, sort of what's your... In maintaining some investments kind of based upon Q4 R&D, kind of what's your outlook for R&D going forward?

Speaker #7: Given kind of your focus areas of A&D and personal healthcare product, the personal healthcare area, sort of what's your— and maintaining some investments— kind of based upon for QR&D, kind of what's your outlook for R&D going forward?

Jeffrey Graves: Well, it's in the OpEx number, Kieran. We don't really break it out. We've been able. We had very strong spending. If you look at R&D spending, we had very strong spending for about three years to refresh our product lines. What you're seeing now enter the market is reflective of that investment. I, you know, it was a difficult time with sales being off to maintain that continuity, but it was critically important to us because when these markets turn, you've got to have a fresh portfolio ready to go, and we do. We've been able to throttle back on R&D spending to some extent as we launch those new products, because the next platform will be out, you know, anywhere from a year to three years, so depending on the market.

Speaker #5: It's in the OPEX number here, and we don't really break it out. We've been able—so we had very strong spending. If you look at R&D spending, we had very strong spending for about three years.

Speaker #5: To refresh our product lines. And what you're seeing now enter the market is reflective of that investment. And it was a difficult time, with sales being off, to maintain that continuity, but it was critically important to us because when these markets turn, you've got to have a fresh portfolio ready to go.

Speaker #5: And we do. So we've been able to throttle back on R&D spending to some extent as we launch those new products, because the next platform will be out anywhere from a year to three years.

Speaker #5: So, depending on the market, you're able to throttle back a little bit on R&D spending. It's kind of a natural cycle a company goes through.

Jeffrey Graves: You're able to throttle back a little bit on R&D spending. It's a kind of a natural cycle a company goes through, and we went through a heavy period. Heavy period at a difficult time of sales, which is why OpEx was a drag for us. It was certainly reflected in the bottom line financials and our cash position. We invested a lot for the future. I'm really pleased now that we're on the backside of that we did it, and it's well positioned as the markets rebound. It's just the world's a little bit crazy right now still, so we just wanna be cautious about sales, make sure we don't get out in front of the market on it. I feel like we're very well positioned.

Speaker #5: And we went through heavy periods—so, heavy periods at a difficult time of sales. Which is why OPEX was a drag for us. It was certainly reflected in the bottom-line financials and our cash position.

Speaker #5: We invested a lot for the future. I'm really pleased, now that we're on the backside of that, that we did it. And we're well positioned as markets rebound.

Speaker #5: It's just the world's a little bit crazy right now, still. So we just want to be cautious about sales, make sure we don't get out in front of the market on it.

Speaker #5: But I feel like we're very well positioned. So R&D spending for us, as a part of OPEX, will be coming down to some extent.

Jeffrey Graves: R&D spending for us should be as a part of OpEx will be coming down to some extent. Also, Kieran, one thing to remember is we have the broadest technology portfolio in the entire industry, okay? We have metals and polymers. In polymers, we have five significant platforms. That's wonderful from a customer standpoint. We can service that, and we can grow. It's a burden from an R&D standpoint. When you look at our R&D burden, fundamentally, it's heavier than most because of the breadth of our technology. In a growth environment, it positions you very well to serve the customer. I, you know, I feel very good about our position. We are able to throttle back a little bit now because we were doing every refresh in parallel for three years.

Speaker #5: But also, Karen, one thing to remember is we have the broadest technology portfolio in the entire industry, okay? We have metals and polymers. And in polymers, we have five significant platforms.

Speaker #5: That's wonderful from a customer standpoint. We can service that, and we can grow. It's a burden from an R&D standpoint. So, when you look at our R&D burden, fundamentally, it's heavier than most because of the breadth of our technology.

Speaker #5: But in a growth environment, it positions you very well to serve the customer. So I feel very good about our position. We are able to throttle back a little bit now because we were doing every refresh in parallel for three years.

Speaker #5: Now it's coming down to one here and one there, and we can get more into the rhythm of it. So it helps us with our OPEX management here in '26.

Jeffrey Graves: Now it's coming down to, you know, one here and one there, and we can get more in a rhythm of it. It helps us with our OpEx management here in 2026.

Speaker #8: But I would say we have not excessively cut R&D. We certainly have pared it back. We have a sizable R&D budget for 2026 that's in the overall OPEX budget.

Phyllis Nordstrom: I would say we have not excessively cut R&D. We certainly have pared it back. We have a sizable R&D budget for 2026 that's in the overall OpEx budget. It's right-sized to the current portfolio that we have and the product investment priorities that we have. You'll definitely see that come in. It's still double digits. It's lower double digits than what it has been, but I think fits the product roadmap and new product launches we have for next year.

Speaker #8: It's right-sized to the current portfolio that we have, and the product investment priorities that we have. You'll definitely see that come in. It's still double digits.

Speaker #8: It's lower double digits than what it has been. But I think it fits the product roadmap, the new product launches we have for next year.

Speaker #5: And Karen, a great example of the strength of that approach is when you look at metal parts for aerospace and defense. There are two ways that they're fundamentally made, broadly.

Jeffrey Graves: Kieran, a great example of the strength of that approach is when you look at metal parts for aerospace and defense, there's two ways that they're fundamentally made broadly. One's casting, where they use our 3D polymer printers as an integral part of, and one is Direct Metal Printing for the more difficult alloys or the higher performing components. Both of those are in demand in the aerospace defense market. In both cases, we have launched new product upgrades over the last 12 months that are fabulous. That's why we're growing in aerospace and defense. It's the high-value end of the market. That's where you wanna be.

Speaker #5: One is casting, where they use our 3D polymer printers as the integral part of it. And one is direct metal printing for the more difficult alloys or the higher-performing components.

Speaker #5: Both of those are in demand in the aerospace defense market. And in both cases, we have launched new product upgrades over the last 12 months that are fabulous.

Speaker #5: And that's why we're growing in aerospace and defense. And it's the high-value end of the market. That's where you want to be.

Speaker #7: All right. And I guess.

[Analyst] (Cantor Fitzgerald): All right. I guess

Kieran McCabe: All right. I guess

Speaker #5: Okay.

Jeffrey Graves: Okay. Does that take care of it, Kieran?

Speaker #7: Take care of it, Karen. Yeah. And my other question was just on—speaking of aerospace and defense, everybody kind of is looking at aerospace and defense as a growth area.

[Analyst] (Cantor Fitzgerald): Yeah. My other question was just on speaking of aerospace and defense, you know, everybody kind of is looking at aerospace and defense as a growth area because, you know, geopolitical and kind of the assumption that there'll be increased spending in that area. Even with aerospace and defense, how much of it is really kind of the companies and the government wanting to be more efficient and using additive to maybe change the method of producing the parts? You may not need a new program, but maybe, you know.

Kieran McCabe: Yeah. My other question was just on speaking of aerospace and defense, you know, everybody kind of is looking at aerospace and defense as a growth area because, you know, geopolitical and kind of the assumption that there'll be increased spending in that area. Even with aerospace and defense, how much of it is really kind of the companies and the government wanting to be more efficient and using additive to maybe change the method of producing the parts? You may not need a new program, but maybe, you know.

Speaker #7: Because of geopolitics, and kind of the assumption that there'll be increased spending in that area. But even with aerospace and defense, how much of it is really the companies and the government wanting to be more efficient and using additive to maybe change the method of producing the parts?

Speaker #7: So, you may not need a new program, but maybe not be tied to that procurement budget—really kind of saying, 'Well, we have this budget, and we have to be smarter about it.' And we may not expect the growth, or politics to get the growth, eventually.

Jeffrey Graves: Yeah.

[Analyst] (Cantor Fitzgerald): -and not be tied to that procurement budget, really kind of saying, Well, we have this budget, and we have to be smarter about it, and may not expect the growth or politics to get the growth eventually. How much of it, you know, is sort of really kind of rethinking and being more efficient and reducing times and things like that and really using additive to do that?

Kieran McCabe: -and not be tied to that procurement budget, really kind of saying, Well, we have this budget, and we have to be smarter about it, and may not expect the growth or politics to get the growth eventually. How much of it, you know, is sort of really kind of rethinking and being more efficient and reducing times and things like that and really using additive to do that?

Speaker #7: How much of it is, sort of, really kind of rethinking and being more efficient and reducing times and things like that in really using additive to do that?

Speaker #5: You touched on a good point, Karen. So part of the demand in aerospace and defense is for the—it's just new weaponry coming out and new vehicles to deliver that weaponry.

Jeffrey Graves: Yeah. You touched on a good point, Kieran. Part of the demand in aerospace and defense is for the just new weaponry coming out and new vehicles to deliver that weaponry. You've got the advent of drones. You've got new generations of naval ships. Part of it is the natural evolution of technology that's drawing in 'cause additive is really good at those things. The other part of it, and I'd say there's two pieces. One is cost savings. By moving from an assembly of many pieces to a casting that's a single piece casting, you can simplify the system and get cost out of the manufacturing process and out of the finished product. That's significant.

Speaker #5: So, you've got the advent of drones, you've got new generations of naval ships. So part of it is the natural evolution of technology that's drawing in, because additive is really good at those things.

Speaker #5: The other part of it, I'd say there's two pieces. One is cost savings. By moving to from an assembly of many pieces to a casting that's a single-piece casting, you can simplify the system and get cost out of the manufacturing process, out of the finished product.

Speaker #5: That's significant. When you look at a modern rocket engine compared to three years ago, and just look at the amount of complexity in the engine then versus now, it's amazing simplification.

Jeffrey Graves: When you look at a modern rocket engine compared to 3 years ago and just look at the amount of complexity in the engine then versus now, it's amazing simplification. At the same time, they're taking performance up. That's available through 3D printed cores and shells for castings. On direct metal applications, you've got the added benefit of a dramatically reduced cycle time for manufacturing and safer supply chains, more localized, more close to home, and that can respond much more quickly.

Speaker #5: And at the same time, they're taking performance up. So that's available through 3D-printed cores and shells for castings. And then, on direct metal applications, you've got the added benefit of a dramatically reduced cycle time for manufacturing and safer supply chains.

Speaker #5: More localized, more close to home. And they can respond much more quickly. The example I put in the opening statements about the reduction for some of these naval components—going from 12 to 15 months production time with traditional manufacturing to literally a couple of weeks.

Jeffrey Graves: The example I put in the opening statements about the reduction for some of these naval components going from 12 to 15 months production time with traditional manufacturing to literally a couple of weeks to produce the same component out of the same materials. You've got higher performance. You've got cost savings that are coming together in aerospace and defense that's really transforming the industry. Yes, overall volumes are up, demand is up, but you've got some key drivers that are highly sustainable in the kinds of parts we're working on. Okay?

Speaker #5: To produce the same component out of the same materials. So you've got higher performance, you've got cost savings that are coming together in aerospace and defense that's really transforming the industry.

Speaker #5: So, yes, overall volumes are up, demand is up. But you've got some key drivers that are highly sustainable in the kinds of parts we're working on.

Speaker #5: Okay?

Speaker #7: Great. Thank you so much.

[Analyst] (Cantor Fitzgerald): Great. Thank you so much.

Kieran McCabe: Great. Thank you so much.

Speaker #5: You're welcome.

Jeffrey Graves: You're welcome.

Speaker #1: Thank you. We reached the end of our question and answer session. I'd like to turn the floor back over for any further or closing comments.

Operator: Thank you. We've reached the end of our question and answer session. I'd like to turn the floor back over for any further closing comments.

Speaker #5: Thanks, Kevin. I'd like to thank you all for participating in the call today. We look forward to updating you on our progress once again after the close of the first quarter.

Jeffrey Graves: Thanks, Kevin. I'd like to thank you all for participating in the call today, and we look forward to updating you on our progress once again after the close of Q1. Have a great day.

Speaker #5: Have a great day.

Speaker #1: Thank you. That does conclude today's teleconference and webcast. You may disconnect your line at this time and have a wonderful day. We thank you for your participation today.

Operator: Thank you. That does conclude today's teleconference and webcast. You may disconnect your line at this time and have a wonderful day. We thank you for your participation today.

Q4 2025 3D Systems Corp Earnings Call

Request a DemoDemo

DDD

3D Systems

Earnings